Vaporizer FAQ — Frequently Asked Questions

The Mighty+ reaches 180 °C in around 60 seconds. A vibration alert and the LC display indicate when the target temperature has been reached.

No. Unlike the VENTY, the Mighty+ does not rely on Bluetooth or app integration. The temperature is set directly on the device using the +/- buttons and the LC display. Many users appreciate this standalone operation without depending on a smartphone.

The VENTY heats up to the set temperature in just <strong>20 seconds</strong> – three times faster than its predecessor, the Mighty+. A green light and double vibration indicate that the device is ready to use.

The VENTY offers a temperature range of <strong>40°C to 210°C</strong> (104°F to 410°F) in 1-degree increments. The default base temperature is 180°C, but it can be adjusted as desired.

The Tinymight 2 has an analogue adjustment dial on the bottom with 10 main settings and intermediate steps – around 20 temperature levels in total across the range from 120 to 240°C. The electronics regulate the temperature in real time with high precision.

In on-demand mode, the Tinymight 2 heats only while the button is pressed and immediately returns to standby. In session mode, it heats automatically and maintains a stable temperature until it is switched off.

Around 4–6 sessions per charge. Via USB-C, it fully charges in about 2 hours.

No. The Crafty+ has a built-in booster button for two temperature levels. The app does, however, allow fine adjustment to each individual degree.

A temperature of 180 degrees Celsius is recommended to start. Lower temperatures (from 130 degrees Celsius) produce lighter, more flavor-forward vapor, while higher temperatures (up to 230 degrees Celsius) create denser vapor. Gradually increasing the temperature is advisable, as higher heat can alter the taste.

The Volcano Hybrid needs up to two minutes to heat up depending on the set temperature. At standard temperatures (around 180 degrees Celsius), it takes about 40 seconds. An acoustic signal (brief pump activation) indicates that the set temperature has been reached.

Yes, <strong>handmade in Finland</strong>.

<strong>On-demand</strong>: heat on draw. <strong>Session</strong>: continuous.

The Solo 3 heats up in 5-15 seconds, depending on the target temperature. At 193°C, it takes around 10-12 seconds. That is twice as fast as the Solo 2 (30 seconds).

In Session mode, you get a continuous 5-20-minute session at a constant temperature. In On-Demand mode, you start each inhalation individually – the device heats up, you draw, then it cools down. On-Demand preserves your material between draws.

A portable dry herb vaporizer with a titanium chamber and convection-focused hybrid heating, introduced in 2024 as the successor to the Rogue SE. Digital temperature from 138 to 221 °C, fixed 3000-mAh battery, USB-C charging with pass-through.

Convection-focused with a share of contact heat, so it is a convection-dominant hybrid. The hot air flows through the herb as you draw, providing clean flavour and even extraction.

Hybrid (conduction and convection).

30 seconds.

Yes, any bong with a 14mm or 18mm joint works. A heavy, stable bong is recommended due to the B2 head's weight.

Not better, just bigger. The B2 delivers more vapor per draw and suits larger loads. The B1 is more efficient with small amounts.

The XMAX V3 Pro is a portable vaporizer from XMAX (Topgreen) with hybrid heating (convection + conduction). It offers a replaceable battery, dosing capsule compatibility and a temperature range up to 220°C.

Hybrid heating: conduction warms the material through contact with the ceramic chamber, while convection also passes hot air through it. This provides even extraction and good flavour.

About the size of a lighter – one of the most compact devices with a genuine hybrid heating system. It fits easily in a trouser pocket.

Yes, with the WPA adapter. It attaches magnetically and fits any 14mm joint.

A vaporizer that uses heated ceramic balls to heat air by convection.

No, the FlavorMaster Classic has an integrated water chamber.

Handmade ceramic ball vape — every FlavorMaster is a work of art. Ceramic housing and balls for the purest flavour.

14mm or 18mm depending on the version.

The heater activates <strong>only when you draw</strong>. No preheating, no material waste between hits.

Yes. Most active compounds vaporize between 170 and 210 °C. <strong>221 °C</strong> covers the relevant range.

The Arizer Go SRT is battery-powered and therefore suited for mobile use.

Yes, thanks to its battery operation the Arizer Go SRT is designed as a portable vaporizer.

In the hands-on test, the Trippy 2 scores 8.5 to 9 out of 10. Testers praise the dense, surprisingly cool vapour from the first draw, the lack of throat irritation, and the simple operation. Points are deducted for the mediocre packaging quality and the small chamber (0.25 g maximum).

Soak the glass tube, mouthpiece and bottom piece in isopropanol (90 %+) — 10 to 15 minutes is enough, and especially the silicone should not be left in an iso bath for more than 30 minutes. Wipe out the chamber dry with cotton buds, then go over it again with an iso-soaked cotton bud. Important: do not let any iso run into the electronics. Let all parts dry completely before reassembly, then heat it once without material.

The Classic is purely electromechanical with an analog dial and pure convection. The Hybrid has a digital touch display, Bluetooth connectivity to the Storz & Bickel app, a hybrid heating system combining convection and conduction, a tube kit, and an automatic shut-off. The Classic takes about 5 minutes to heat up, the Hybrid only 40 seconds. The Classic costs 398 euros, the Hybrid 598 euros.

The Volcano Classic is known for its longevity. Since it has no digital electronics, there are few components that can age or fail. Many users report over 10 years of operation without issues. Storz & Bickel offers a 2-year warranty, extendable to 3 years with registration. Wear parts like balloons and screens need to be replaced regularly.

The <strong>glass bowl</strong> replaces the traditional closed chamber. Material sits openly in heat-resistant borosilicate glass and is passed through by pure convection air. That produces neutral-tasting, clean vapour.

In just <strong>2 seconds</strong>, the Bowle Series 2 is ready to use. That enables true on-demand operation -- individual draws instead of full sessions.

No. The PAX Flow is <strong>draw-activated</strong>. You inhale through the mouthpiece and the convection heater starts automatically. The temperature level is changed by a short shake or via the app.

Around <strong>20 seconds</strong>. Because the heater starts with every draw (on demand), no preheating in the traditional sense is needed.