No shop prices are currently available for this vaporizer. Please check back later.
View alternatives →| Heating Method | Induction |
| Device Type | Portable |
| Brand | Vestratto |
| Power Source | Battery |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Material | Dry Herb & Concentrates |
| Vapor Path | Glass |
| Battery Type | Milwaukee M12 |
| Replaceable Battery | Yes |
| Passthrough Charging | No |
The display lets you select the power level and energy target for the heating cycle. The current version 2 includes a Wagon Wheel mount on which the Anvil or Tornado can rest during heating.
Vestratto Forge is a battery-powered induction heater for Anvil, Tornado, and DynaVap. It requires a separately sold Milwaukee M12 battery. Power and delivered energy are set via the display; the current version 2 includes the Wagon Wheel holder.
The Forge's coil generates an electromagnetic field. With the Anvil, it heats the outer steel layer of the ThermoCore oven. Other devices also require an induction-compatible magnetic outer layer. Vestratto lists the Anvil, Tornado, and DynaVap.
For suitable setups, Vestratto mentions herb use with a cold start and dabs at high temperature. According to the manufacturer, the Tornado with its temperature-sensing chamber is not suitable for cold starts.
Triple-pressing the large button activates the screen. It displays the power level and the energy target in joules. In automatic mode, heating begins when you place the Anvil into the active area of the coil. In manual mode, you start the heating cycle with the large button.
Four heating programs can be customized and saved. If you remove the Anvil during a heating cycle, the Forge pauses. If the electronics get too hot, the device forces a cooldown phase.
The Forge requires a Milwaukee M12 battery, which is purchased separately and is swappable. The counter on the display tracks the heating cycles since the last battery swap. According to Vestratto, performance may vary between different M12 batteries.
In version 2, Vestratto revised the coil power calibration and battery management. The Wagon Wheel assembly is included with the currently available version 2. It serves as a resting place for the Anvil or Tornado inside the Forge while the device heats.
 Vestratto Forge | ||||
|---|---|---|---|---|
| Price from | N/A | N/A | 187.39 € · Import charges may apply | 203.82 € · other regions |
| Type | Portable | Butane | Butane | Butane |
| Heating | Induction | N/A | Hybrid | N/A |
| Temperature | N/A | 260°C | N/A | N/A |
| Heat-up time | N/A | 45s | N/A | N/A |
| Battery | N/A | Butane | Butane | Butane |
| Weight | N/A | 45 g | N/A | N/A |
Green = better value
Open in full comparison →A battery-powered induction heater for separately used vaporizers. Vestratto lists the Anvil, Tornado, and DynaVap; the device used must be induction-compatible.
A Milwaukee M12 battery. It is not included and is swappable.
In automatic mode by placing the Anvil into the active area of the coil. In manual mode, the large button starts the heating cycle.
The power level and the energy target in joules. Four heating programs can be customized and saved.
Yes, with the currently available version 2. It holds the Anvil or Tornado inside the Forge while the device heats.
Comments
No comments yet. Be the first!
Sign in to comment