Induction Heater Price Comparison
An induction heater heats the metal cap of a butane vaporizer such as DynaVap without a flame: You insert the cap into the coil, press a button, and wait for the click. The devices in the price comparison differ primarily in whether the battery cells are included, how much power they provide, and which vaporizers the manufacturer approves them for.
How does an induction heater work?
There is a coil inside the heater’s opening. It generates an alternating magnetic field that directly heats a metal part inside it—in the case of DynaVap, the stainless steel or titanium cap. As with a lighter, the heat travels from the cap to the chamber and the herb. The coil does not heat glass, wood, or plastic, so a vaporizer needs a metal part in the right place.
The advantage over a flame: The cap is heated evenly all around, you do not need to rotate the vaporizer, and neither gas nor a lighter is required. You will still hear the click of the DynaVap cap as a signal that the chamber is hot enough. You can learn more about conduction and convection in the overview of heating methods.
Which induction heaters are available?
| Heater | Battery | Special feature according to the manufacturer |
|---|---|---|
| Ispire The Wand | 2 replaceable cells; USB-C charging | Originally designed for concentrates using glass cups; compatible with the DynaVap M and B Series, Omni, VonG, and BBs when used with an adapter |
| Ispire V-Wand | 2 × 18650, replaceable | Larger version based on the Wand concept |
| Cuboo Heater Pro V2 | 2 × 18650, replaceable, USB-C charging | Digital controls, switches off after 10 minutes, 277 g |
| Cuboo Induction Heater XL | 2 × 21700, not included | Power from 30 to 100 W, 220 g, USB-C cable included |
| YLL 3.0 | 2 × 21700, not included | Power from 30 to 100 W, adjustable chamber, 300 g |
| The Flare V2 | 3 × 18650, replaceable | Manufacturer’s example: Dani Fusion 2.0 at 100 W for 45 seconds |
The manufacturer no longer lists the DynaTec heaters Apollo 2 and Orion V2 from DynaVap in its own store; they appear in the price list below with the remaining retailer offers.
Are the batteries included?
All heaters with documented specifications use replaceable cells. This allows you to bring a charged spare set when traveling and replace aging cells yourself; in the Wand manual, Ispire explicitly recommends a second set. The two 21700 cells are not included with the YLL 3.0 or the Cuboo Heater XL; factor them and a suitable charger into your budget. For the YLL 3.0, MAD Heaters specifies Molicel P42A, P45B, or P50B cells, while the Cuboo XL uses two unprotected flat-top cells as a matched pair.
Power, timer, and click
On heaters with adjustable power, you select the wattage and heating duration. High power heats faster, while low power applied for longer provides more even heating. The temperature display on the Ispire Wand does not indicate a measurement within the herb: According to the MAD Heaters TEMPEST 2 manual, the displayed value functions as a timer for the heating duration.
With DynaVap devices, the cap’s click continues to indicate when you can take a draw. There are two ways to use the Wand: With the adapter, press the fire button five times, set the temperature, hold the coil over the cap, and wait for the click; without the adapter, tapping twice starts automatic mode.
Is every heater compatible with every vaporizer?
No. The opening must fit the cap, and the coil must reach the metal part at the correct height. Most heaters are designed for DynaVap caps. For the MAD Heaters TEMPEST 2, the manufacturer specifies the Ispire Wand, whose opening must be at least 14.0 mm wide, and the YLL 3.0. Use only combinations explicitly specified by the heater or vaporizer manufacturer; the induction heater glossary entry explains the selection criteria in more detail.
Frequently asked questions
Is an induction heater worth it compared with a lighter?
For daily use, yes: You do not need gas, do not have to rotate the vaporizer, and heat the cap consistently each time. However, you will also have a battery to charge and a price of around 90 euros or more. Anyone who vaporizes only occasionally can get by with a good jet lighter.
Does an induction heater work with every vaporizer?
No. The vaporizer needs a metal part that the coil can heat, and the cap must fit into the opening. Most heaters are designed for DynaVap caps; the respective manufacturer specifies other compatible combinations.
Do I need to buy batteries separately?
Yes, for the YLL 3.0 and the Cuboo Heater XL: Both require two 21700 cells that are not included. Ispire Wand, V-Wand, Cuboo Heater Pro V2, and The Flare V2 also use replaceable cells, with the V-Wand, Pro V2, and Flare V2 using 18650 cells; check the offer to see whether the cells are included.
Which induction heater is compatible with the TEMPEST 2?
MAD Heaters specifies the Ispire Wand and the YLL 3.0. The Wand’s opening must be at least 14.0 mm wide; the power, timer, and insertion depth are listed in the tables in the TEMPEST-2 manual.
Sources
Reviewed on October 11, 2026: DynaVap: The Wand with Adaptor, Ispire: V-Wand, YLL: Induction Heater 3.0, Battery Free Ganz: The Flare, Cuboo Heater XL, Cuboo Heater Pro V2, MAD Heaters: TEMPEST 2, manual.
Induction heater price comparison
The list shows all induction heaters with current offers and can be sorted by price and manufacturer.
Induction Heater Price Comparison
Induction heaters (IH) heat DynaVap and other Vapcaps using electromagnetic induction - faster and more consistent than a lighter.
