Cuboo Heater Pro V2

The core idea behind the Cuboo Heater Pro V2 is straightforward: butane gas vaporizers such as the DynaVap M or the Anvil by Vestratto are traditionally heated with a torch lighter. This requires practice, is sensitive to wind, and delivers inconsistent results depending on technique. An induction coil resolves all of that: the device simply slots into the opening of the heater, and an electromagnet heats the metal cap evenly within a few seconds — always consistent, always repeatable.

The technology is the same as that used in induction hobs in the kitchen, just smaller and tailored to the requirements of vaporizer caps. There is no flame, no butane gas refill, and no fire risk. This makes the Cuboo Heater Pro V2 particularly well suited to everyday use — including indoors.

The Pro V2 operates with an adjustable wattage of 30 to 60 watts, with up to 70 W boost available briefly. Lower wattage is suited to slower, more even heating; higher values bring the cap to temperature more quickly and are suited to shorter, more intense hits.

The timer is freely adjustable between 10 and 60 seconds. This makes every heating cycle reproducible: once you have found your optimal combination of watts and seconds, you can recall it at any time. The display shows the wattage, timer countdown, and the battery level of both 18650 cells separately — no guessing which battery is weaker.

Two standard 18650 battery cells power the Cuboo Heater Pro V2. 18650 cells are a worldwide standard — they are found in laptops, torches, and countless other devices. This means cells are available everywhere, can be swapped yourself, and make the device long-lasting. No built-in batteries, no sending the device back to the manufacturer when capacity diminishes.

Charging is via USB-C. Cuboo does not specify whether the device can be used while charging. A freshly charged battery delivers around 30 heating cycles — enough for many sessions in a day before needing to plug in again.

The Cuboo Heater Pro V2 works with any vaporizer that is compatible with a standard induction cap: DynaVap M, M+, B, Omni, Anvil (Vestratto), and further models (not the Dani Fusion and Tempest) with suitable metal caps. A strong neodymium magnet holds the inserted device securely in position without needing to hold it in place.

The device is WPA-compatible: if you draw your DynaVap through a water glass or bong, you can use the Cuboo Heater Pro V2 for that purpose. The inner glass insert is replaceable if needed — handy if it fogs up or gets damaged through frequent use.

Anyone who already owns a DynaVap or another induction-compatible vaporizer and wants to get rid of their dependence on butane gas will find a well-thought-out solution in the Cuboo Heater Pro V2. No lighter, no refilling, no open flame indoors — instead, a precise, repeatable heating process at the press of a button.

The heater is aimed at users who want more control over their sessions than a torch allows. The swappable batteries and replaceable glass insert make it a long-lasting companion. Cuboo's 1-year warranty is included. Other devices from the brand can be found on the Cuboo manufacturer page.