Wolkenkraft LIVE

The LIVE heats using true convection: a heating element warms the air, and only this hot air flows through the herb and vaporizes the active ingredients. The material sits in a titanium chamber, which retains heat evenly and – unlike conduction devices with hot walls – does not scorch anything.

Titanium is robust, flavour-neutral and transfers heat efficiently. Combined with pure convection, this produces clean, terpene-rich vapour that is especially convincing at lower temperatures. The compromise with convection is the slightly longer heat-up time of around 40 seconds – entirely normal for pure convection devices and quickly forgotten given the vapour quality.

The LIVE offers three memory modes (M1, M2, M3) for saving your favourite settings. Instead of selecting the temperature again before every session, you can retrieve your saved profile at the touch of a button.

This is more useful in everyday life than it may initially sound: if you enjoy flavour-focused vaping at 180 °C in the morning and prefer a more powerful session at 210 °C in the evening, you can save both as presets and switch between them in seconds. The three memory slots are also a genuine convenience for multiple users with different preferences. The memory modes turn the broad temperature range into a quickly accessible system instead of requiring constant readjustment.

The sequence mode is one of the LIVE's smartest features. Instead of using a fixed temperature, the device follows a three-stage progressive heating profile: it starts low and automatically increases the temperature in several stages during the session.

This replicates the manual „temperature ramp" already used by experienced users – starting at a low temperature for the full flavour, then increasing it to release the remaining active ingredients. The sequence mode automates this: you do not need to make adjustments yourself and automatically get the full spectrum of flavour and vapour density from a chamber. This extracts noticeably more from the same amount of herb.

The LIVE uses an open, fully accessible airpath. Unlike devices with winding, permanently installed channels, every part of the LIVE can be reached, which makes cleaning considerably easier. This keeps the flavour clean and the draw unrestricted throughout the device's lifespan.

The device comes with cleaning tools and replacement screens. Here is how to keep the LIVE in good condition:

• After every session: brush out the chamber while the device is still slightly warm.
• Regularly: clean the mouthpiece, Coolscreen module and airpath with isopropyl alcohol, then leave them to dry.
• Screens: replace them with the supplied spare screens when the draw begins to weaken.

The zircon ceramic mouthpiece and titanium chamber can easily withstand this cleaning and do not retain any unwanted flavour.

1. Switch on: hold the power button until the RGB display lights up.
2. Fill the chamber: remove the mouthpiece and add medium-fine ground herb to the titanium chamber or insert a prepared dosing cap; the filling funnel makes this easier.
3. Select the mode and temperature: set a fixed temperature between 40 and 220 °C, retrieve a memory profile (M1/M2/M3) or activate the sequence mode.
4. Heat up: after around 40 seconds, the display indicates that the target temperature has been reached.
5. Draw: inhale slowly and evenly for around 10 to 15 seconds – the Coolscreen module keeps the vapour pleasantly cool.

To switch it off, hold the power button again. Despite the extensive feature set, the basic process remains simple.

• Grind: medium-fine and even – with convection, a larger surface area produces denser vapour.
• Fill level: fill the chamber loosely but completely; packing it too tightly restricts the airflow.
• Use sequence mode: activate the three-stage mode to get the full range of flavour and effects from a chamber.
• Start low: begin at a flavour-focused 170–180 °C, then increase the temperature.
• Keep the Coolscreen clean: a clean cooling module delivers significantly better flavour than one with resin build-up.

Because the LIVE maintains a constant temperature and offers flexibility with sequence and expansion modes, it is worth using a load completely instead of refilling early.

Within the Wolkenkraft range, the LIVE and the ÄRiS represent two different classes. Both are pure convection devices with precise temperature control, but the LIVE is positioned significantly higher:

• Battery: LIVE with 3,000 mAh compared with 2,300 mAh for the ÄRiS – more sessions per charge.
• Materials: titanium chamber, zircon ceramic mouthpiece and Coolscreen module for the LIVE; the ÄRiS keeps things simpler.
• Features: RGB display, memory modes, sequence mode and expansion mode for the LIVE; the ÄRiS focuses on straightforward operation.
• Included accessories: the LIVE set includes dosing caps and plenty of accessories.

In short: the ÄRiS is the straightforward, affordable entry-level option, while the LIVE is the feature-rich premium device for enthusiasts. You can find the current price difference in the price comparison above.

In the premium class, the LIVE faces established competition:

• Storz & Bickel Mighty+: the benchmark with hybrid heating, a very large battery and top vapour quality – more robust and more expensive, but the standard-setter in its class.
• Arizer Solo 3 V2: a pure convection device with a very long battery life and clean flavour, but larger and without the LIVE's range of modes.

The LIVE stands out in this field with its features: active vapour cooling via the Coolscreen, RGB display, memory modes, sequence mode, expansion mode and a very broad temperature range starting at 40 °C. Anyone looking for a feature-rich German premium device with cool vapour will find the LIVE a strong alternative to these established models.

• Little vapour: usually caused by a grind that is too coarse or a chamber that is filled too loosely – grind more finely, fill evenly and select a higher temperature if necessary.
• Only warm air / no vapour: drawing too early. Wait for the roughly 40-second heat-up time until the display indicates that the target temperature has been reached.
• Hot, harsh vapour: clean the Coolscreen module; resin build-up in the cooling module reduces its cooling effect.
• Weak draw: clean the airpath and mouthpiece and replace the screen.
• Display does not respond as expected: check whether a memory or sequence mode has accidentally been activated.
• Battery weakens after extended use: this is inherent to built-in batteries – contact the retailer during the warranty period.