Only for concentrates such as Rosin, Resin, Wax, or Bubble Hash. The Pivot does not vaporize dry herbs, cartridges, or liquids; Puffco explicitly excludes nicotine products.
How long does the Puffco Pivot take to heat up?
According to Puffco, approximately 20 seconds, depending on the setting. The chamber then remains at temperature for 45 seconds; Boost Mode extends the cycle by 15 seconds and raises the temperature by approximately 10 °C.
What temperatures does the Puffco Pivot offer?
Four fixed settings: Blue 260 °C, Green 271 °C, Red 282 °C, and White 307 °C (500 to 585 °F). There is no freely adjustable temperature or app control.
How many sessions does the Puffco Pivot battery provide?
Puffco specifies up to 15 heat cycles per charge on the lowest setting; Boost counts as an additional cycle. The Dry Herb Vape Zone test achieved 10 to 15 sessions. Puffco does not specify the capacity in mAh.
How long does the Puffco Pivot take to charge?
Approximately 45 minutes via USB-C (5 V / 1 A), according to Puffco; one test by Dry Herb Vape Zone measured just over one hour. Wireless charging is not supported.
Does the Puffco Pivot have Bluetooth or an app?
No. The Pivot is controlled entirely with one button; the light bar displays the setting, charge level, and error codes. At Puffco, app control is available only for the Peak Pro and Proxy.
Can I use the Puffco Pivot with a bong or rig?
Yes, with the separately available Pivot Glass Adapter. It includes its own 3D Chamber as well as 10- and 14-mm glass joints, turning the Pivot into an E-Nail for existing glass.
What colors is the Puffco Pivot available in?
Currently Onyx and Sapphire (since May 2026). Slate (launch 2024), Mocha (March 2025), and Pine (fall 2025) were limited-time colors and are sold out at Puffco.
How long is the Puffco Pivot warranty?
Two years for the electronic base and one month for the chamber. Valid only when purchased from authorized retailers; Puffco excludes marketplaces such as Amazon or eBay.
Why is my Puffco Pivot flashing red-white?
Puffco describes red-white flashing as a chamber error that may be caused by dirty contacts. Clean the contacts according to the instructions and allow them to dry completely. If the error persists, contact Puffco Support; the flashing sequence alone does not prove any specific cause.
Only for concentrates such as Rosin, Resin, Wax, or Bubble Hash. The Pivot does not vaporize dry herbs, cartridges, or liquids; Puffco explicitly excludes nicotine products.
According to Puffco, approximately 20 seconds, depending on the setting. The chamber then remains at temperature for 45 seconds; Boost Mode extends the cycle by 15 seconds and raises the temperature by approximately 10 °C.
Four fixed settings: Blue 260 °C, Green 271 °C, Red 282 °C, and White 307 °C (500 to 585 °F). There is no freely adjustable temperature or app control.
Puffco specifies up to 15 heat cycles per charge on the lowest setting; Boost counts as an additional cycle. The Dry Herb Vape Zone test achieved 10 to 15 sessions. Puffco does not specify the capacity in mAh.
Approximately 45 minutes via USB-C (5 V / 1 A), according to Puffco; one test by Dry Herb Vape Zone measured just over one hour. Wireless charging is not supported.
No. The Pivot is controlled entirely with one button; the light bar displays the setting, charge level, and error codes. At Puffco, app control is available only for the Peak Pro and Proxy.
Yes, with the separately available Pivot Glass Adapter. It includes its own 3D Chamber as well as 10- and 14-mm glass joints, turning the Pivot into an E-Nail for existing glass.
Currently Onyx and Sapphire (since May 2026). Slate (launch 2024), Mocha (March 2025), and Pine (fall 2025) were limited-time colors and are sold out at Puffco.
Two years for the electronic base and one month for the chamber. Valid only when purchased from authorized retailers; Puffco excludes marketplaces such as Amazon or eBay.
Puffco describes red-white flashing as a chamber error that may be caused by dirty contacts. Clean the contacts according to the instructions and allow them to dry completely. If the error persists, contact Puffco Support; the flashing sequence alone does not prove any specific cause.
Sign-in runs through Google or Microsoft, which process data themselves in the process. We only receive your email address, your name and an account identifier, and store them to manage your account. We do not pass on your data for advertising purposes.
With your consent, we use cookies and similar technologies to store and access device information and to analyse, for example, browsing behaviour on this website.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Comments
No comments yet. Be the first!
Sign in to comment