Pros
- The heating head has no cable attached; it heats up in the dock.
- For herb and concentrates: a 25 mm quartz banger with two quartz pearls is included.
- Temperature adjustable via the digital PID controller.
- Lifetime manufacturer's warranty on the heating coil and PID controller.
- Wooden dock with slots for 10 mm, 14 mm, and 18 mm joints.
Cons
- Requires a power outlet and is not designed for portable use.
- A water pipe is required and is not included.
- The heating element must be returned to the dock between draws to stay hot.
- Glass, quartz, screens, and O-rings are excluded from the warranty.
No prices currently available
No shop prices are currently available for this vaporizer. Please check back later.
View alternatives →Specifications
| Heating Method | Hybrid |
| Device Type | Ball Vape |
| Brand | Vapvana |
| Power Source | AC Power |
| Warranty | Lifetime |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Analog (Dial) |
| Material | Dry Herb & Concentrates |
| Vapor Path | Glass |
Specification sources: vapvana.com / products/ace-kitManufacturer (Recorded source check: 12.10.2026)
Compatible Accessories
Adapters
3
Screens & Filters
3
Cleaning & Care
1Heating Elements
1
Read the full description
The set receives power through the PID controller from a wall outlet; Vapvana offers versions for 110 V (USA) and 220 V (international). With the included quartz banger, the Ace can also vaporize concentrates. A water pipe is not included in the set, but Vapvana considers one a requirement.
About this vaporizer
Vapvana Ace is a desktop ball vaporizer that runs on wall power. Its cordless titanium heating head with rubies inside heats up in the dock and is then placed onto the glass bowl. Temperature is set via a digital PID controller. Because a quartz banger is included in the set, the Ace works with both herbs and concentrates.
Heating Head and Heating Principle
The Ace's 25 mm heating head is made of titanium and filled with rubies on the inside. According to Vapvana, the Ace contains more of these balls than the brand's other cordless models, giving it greater heat retention. During a draw, air flows past the hot balls and heats up.
The Ace features what Vapvana calls a diffuser head. It sits on top of the bowl so that the hot metal also warms the bowl itself. Vapvana describes this as a mix of convection and conduction. The heating head does not make direct contact with the herb.
Dock, Controller, and Operation
The centerpiece of the set is the wooden dock. It holds the PID controller, the heating coil (Vapvana calls it the "Hot Hole"), the heating head, and the accessories. The heating coil stays fixed in the dock and heats the heating head whenever it is inserted. Temperature is set on the digital PID controller. Vapvana does not specify a temperature range for the Ace.
To take a draw, you remove the hot heating head by its handle from the dock and place it on the bowl. Afterward it goes back in to stay hot. There is a stand on the dock for breaks. Vapvana advises always resting the hot heating head there and never placing it on the table.
Glass Bowl and Water Pipe
The Ace glass bowl has a 14 mm joint and a built-in carb (10 mm). According to Vapvana it holds approximately 0.2 g of ground herb. In the ball vape guide, Vapvana states that the heating head can handle loads up to 0.3 g.
The Ace cannot be used without a water pipe: according to Vapvana, a ball vaporizer is designed to work with a glass water pipe to cool and filter the dense vapor. For a desktop water pipe, Vapvana recommends roughly 30 cm in height and an angled mouthpiece to keep the face away from the hot heating head.
Concentrates with the Quartz Banger
For concentrates, a 25 mm quartz banger ("Auto Spinner") with two 6 mm quartz pearls and a marble carb cap is included. It is heated in the same induction coil in the dock as the heating head. A glass reducer from 14 to 10 mm adapts the banger to other water pipes.
What's in the Box, Power, and Warranty
Vapvana ships the Ace as a complete set:
- 25 mm heating head with handle and rubies
- 25 mm heating coil ("Hot Hole") with coil cover and bracket
- Wooden dock
- Ace glass bowl with built-in carb
- 25 mm quartz banger with two 6 mm quartz pearls and marble carb cap
- Glass reducer 14 to 10 mm
- Digital PID controller with power cable
- Stand for the heating head
- Loading and packing tool, wooden cleaning brush
- Spare parts: screens, O-rings for the bowl, screws
The set is available for 110 V (USA) and 220 V (international). Vapvana offers a lifetime warranty on every heating coil and every PID controller for as long as you own the set, including purchases through an authorized retailer. Excluded are glass, quartz, screens, O-rings, and other wear parts, as well as damage caused by drops, water, or misuse. To make a warranty claim, send Vapvana the order number along with a photo or short video. Outside the USA, the customer is responsible for shipping and import costs for the replacement part.
Official Resources
More Vapvana Vaporizers 1
Starter Bundles
Frequently asked questions
The titanium heating head is filled with rubies and heats up in the induction coil inside the dock. During a draw it sits on top of the bowl: the air heats up as it passes over the balls, and the hot metal warms the bowl at the same time. Vapvana calls this a mix of convection and conduction.
Vapvana does not specify a temperature range for the Ace. Temperature is set on the digital PID controller.
Yes. According to Vapvana, a ball vaporizer cannot be used on its own — the water pipe cools and filters the vapor. It is not included in the set. The Ace glass bowl has a 14 mm joint.
Yes. The set includes a 25 mm quartz banger with two 6 mm quartz pearls that is heated in the dock's induction coil. The included 14 to 10 mm reducer also fits it to water pipes with a 10 mm joint.
The heating coil and PID controller are covered for life as long as you own the set. Glass, quartz, screens, O-rings, and damage caused by drops, water, or misuse are excluded.
Empty the bowl while it is still warm using the brush. For residue, Vapvana recommends soaking the bowl, glass parts, and screen in isopropyl alcohol (91% or higher) for 30 to 60 minutes, then rinsing thoroughly with hot water. The heating head rarely needs cleaning. For a heat clean, set the PID controller to 399 °C (750 °F) or higher and let the head run in the stand for 20 to 30 minutes — the titanium may discolor. The heating head and heating coil must never come into contact with water or alcohol.
Comments
No comments yet. Be the first!
Sign in to comment