Cannabis Hardware Whisper Wireless E-Nail Station
Best Price
338.98
€
Available at StonerCornerTH
Get notified for free when the price drops
Pros
- Sturdy 6061 aircraft aluminium body, made in the USA
- Takes flower diffusers and concentrate bangers — both material types
- Heat-deflecting plate keeps the surface cooler (around 200 °F difference)
- Standard XLR connection, compatible with common PID controllers
- Two storage compartments for accessories in the body
- One-year manufacturer warranty
Cons
- Needs a SEPARATE PID controller — not part of the station's price
- Mains only via the controller, no battery
- The coil is a wear part and gets replaced
- Not usable on its own without a matching controller — check what you already own
- As a desktop station, not made for the road
Cannabis Hardware Whisper Wireless E-Nail Station — Price Comparison (1 Shop)
Price history is being recorded. Check back in a few days!
Out of Stock
Last updated: 31/08/2026, 12:41 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Set a Price Alert
Get notified when the price drops.
Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Desktop |
| Brand | Cannabis Hardware |
| Power Source | Plug-in |
| Temperature Control | Digital |
| Material | Dry Herb & Concentrates |
| Replaceable Battery | No |
About this vaporizer
The Cannabis Hardware Whisper is a heated e-nail station made of 6061 aircraft aluminium, built in Florida. Rather than its own electronics it brings a 25-millimetre axial coil and a heat-deflecting plate — you plug the PID controller into the back via XLR. It is tested with the PID controllers from Cannabis Hardware and Auber; most e-nails use the same XLR standard. The principle resembles the brand's FlowerPot ball vapes: the station holds the nail or banger at temperature while the heat-deflecting plate keeps the surface cooler (around 200 Fahrenheit of difference per the maker). Two compartments in the body hold flower diffusers and a 25-millimetre banger so accessories do not lie around loose. Because it takes both flower diffusers and concentrate bangers, the Whisper covers both material types. Cannabis Hardware gives a one-year warranty.
Pros
- Sturdy 6061 aircraft aluminium body, made in the USA
- Takes flower diffusers and concentrate bangers — both material types
- Heat-deflecting plate keeps the surface cooler (around 200 °F difference)
- Standard XLR connection, compatible with common PID controllers
- Two storage compartments for accessories in the body
- One-year manufacturer warranty
Cons
- Needs a SEPARATE PID controller — not part of the station's price
- Mains only via the controller, no battery
- The coil is a wear part and gets replaced
- Not usable on its own without a matching controller — check what you already own
- As a desktop station, not made for the road
More about the brand Cannabis Hardware
Cannabis Hardware Vaporizer Key Takeaways Cannabis Hardware — vaporizer manufacturer from USA Conduction + convection + hybrid heating, 7 models (desktop, ball vape) Range from 312.66 € to 450.51 €, available at 1+ shops
Cannabis Hardware →
Key Facts — Cannabis Hardware Whisper Wireless E-Nail Station
Desktop · Heating: Conduction · From: €338.98 · Shops: 1
The Cannabis Hardware Whisper is a heated E-Nail station made from 6061 aluminium with a 25-mm axial coil and heat dissipation plate. It accepts flower diffusers and bangers and is operated via an external PID controller. On VapoChecker you can find the Whisper with daily updated prices from verified shops.
See also: Cannabis Hardware Blaze Pipe · FlowerPot B1 · Airstream · VMAX Injector Ball Vape
Station, not complete device
The Whisper is not an E-Nail with its own electronics, but a heated station: it includes the 25-millimetre axial coil and the housing, while the controller is plugged in at the back via XLR. This is an important point before buying: anyone who does not yet own a PID controller will need one in addition. The Whisper has been tested with controllers from Cannabis Hardware and Auber, and because most E-Nails use the same five-pin XLR standard, other common controllers also fit. The concept is the same as with the brand's FlowerPot-Ball-Vapes: a robust heating body to which you add the control unit.
Aluminium, heat dissipation and storage
The housing is made from 6061 aircraft aluminium and is manufactured in Florida: solid rather than delicate. A heat dissipation plate keeps the touchable surface cooler than the nail itself; the manufacturer states a difference of around 200 Fahrenheit. Two compartments in the housing hold flower diffusers and a 25-millimetre banger, so the accessories stay with the device instead of disappearing into a drawer. Because diffusers for flower can be used just as much as a banger for concentrates, the Whisper is not limited to one material type.
What to clarify before buying
The central question is the controller. The Whisper alone does not heat anything: it needs a PID controller, which must be purchased separately or already be available. Anyone already using an Auber or Cannabis Hardware controller simply plugs in the Whisper. Anyone starting from scratch should budget for the station and controller together. As with any E-Nail, the coil is a wear part. Cannabis Hardware provides a one-year warranty on the station.
Featured in Best Lists
Learn More
Overview
Available at
More Cannabis Hardware Vaporizers 2
Similar Vaporizers 3
Spec comparison
| Whisper Wireless E-Nail Station | FlowerPot B2 | |
|---|---|---|
| Type | Desktop | Ball Vape |
| Heating | Conduction | Convection |
| Temperature | N/A | 427°C |
| Heat-up time | N/A | 300s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | N/A | N/A |
| Whisper Wireless E-Nail Station | FlowerPot B1 | |
|---|---|---|
| Type | Desktop | Ball Vape |
| Heating | Conduction | Convection |
| Temperature | N/A | 427°C |
| Heat-up time | N/A | 180s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | N/A | 450.51€ · incl. shipping |
Compatible Accessories
✓ Official Accessories (169)
Cannabis Hardware
18.8mm Male Tip for Blaze Two Piece Mouth
Cannabis Hardware
18.8mm Male Tip for Haze/Blaze Two Piece Mouth Stem (3555)
Cannabis Hardware
Oring Set for Haze/Blaze and Two Piece Mouthpiece (9490)
Cannabis Hardware
18.8mm Female Tip for Blaze Two Piece Mouth
Cannabis Hardware
18.8mm Female Tip for Haze/Blaze Two Piece Mouth Stem (3554)
Cannabis Hardware
18.8mm Modular Mouthpiece (9448)
Cannabis Hardware
10mm Glass Stem for Matrix Bowl (9493)
Cannabis Hardware
14mm Glass Stem for Matrix Bowl (9492)
Cannabis Hardware
Tornado Stem
Cannabis Hardware
18.8mm Stem for Matrix Bowl (9484)
Cannabis Hardware
Boodha Bar attachment Tectonic stem
Cannabis Hardware
Haze/Blaze Two Piece Mouth Stem Titanium
Cannabis Hardware
TBucket Pro All-In-One Concentrate System
Cannabis Hardware
8" Glass Tube (9501)
Cannabis Hardware
Glass Tube for Airstream (9497)
Cannabis Hardware
18mm Straight-through CH Glycerin tube (9503)
Cannabis Hardware
10mm Female Post (3163)
Cannabis Hardware
10mm Male Post (3162)
Cannabis Hardware
Mercury Female Flower Diffuser
Cannabis Hardware
14/18 Enail with SiC Dish Dab Rig (8056)
Cannabis Hardware
18.8" GooRoo Designs Perc Bubbler (9301)
Cannabis Hardware
Dab Rig | 14/18.8 Male Flat Coil Enail Set Up (7031)
Cannabis Hardware
14/18 Dab Rig with 28mm Quartz Dish Essentials Bundle (8064)
Cannabis Hardware
Flat Base Glass Rig Desktop Show Mount - STL File Only (3389)
Cannabis Hardware
FlowerPot Dab Top
Adapters
8
Cannabis Hardware
18.8mm Male to Male Adapter (9447)
Cannabis Hardware
Banger Adapter for Haze & Blaze Pipe
Cannabis Hardware
Cannabis Hardware 14mm Blaze/Haze Banger Adapter
Cannabis Hardware
Glycerin Joint Chiller by Freeze Pipe (9506)
Cannabis Hardware
18.8mm Female to Female Adapter (9446)
Cannabis Hardware
Cannabis Hardware FlowerPot Male Post 14mm
Cannabis Hardware
Haze Stem Coupler
Cannabis Hardware
Pax 2, 3 and Plus - Water Adapter (2744)
Cannabis Hardware
FlowerPot Machined Titanium Screen
Cannabis Hardware
FlowerPot Titanium Screen
Cannabis Hardware
3/4" Titanium Single Weave Screen (9488)
Cannabis Hardware
Machined Titanium Screen 5/8" (3468)
Cannabis Hardware
Titanium Screens Premium 5/8" - Single (9375)
Cannabis Hardware
3/4" Machined Titanium Screen (3521)
Cannabis Hardware
Stainless Steel Basket Screen (9491)
Cannabis Hardware
3" x 6" Rosin Mesh Bags (Choose Micron)
Cannabis Hardware
2" x 10" Rosin Press - Mesh Bags (Choose Micron)
Cannabis Hardware
2" x 3" Rosin Mesh Bags (Choose Micron)
Bags & Cases
10
Cannabis Hardware
Modular Wooden Bowl Sleeve
Cannabis Hardware
16mm Banger Sleeve for 25mm Axial Coil (3514-9479)
Cannabis Hardware
Airstream Explorer Weatherproof Case (9201)
Cannabis Hardware
Cannabis Hardware Carry Case
Cannabis Hardware
CH Branded Carry Case (9494)
Cannabis Hardware
High AF Unisex Long Sleeve Tee - Merch
Cannabis Hardware
STONED Tough Case for iPhone® - Merch
Cannabis Hardware
20mm Sleeve for 25mm Coils (3559)
Cannabis Hardware
Moab Explorer Weatherproof Case - Empty
Cannabis Hardware
16mm Banger Sleeve for 25mm Axial Coil ZenLeaf - Cannabis Hardware
Cannabis Hardware
Clampy
Cannabis Hardware
Pre Press Mold for 3"x10" Plates (3218)
Cannabis Hardware
Loading Tool (2774)
Cannabis Hardware
FlowerPot Debowler Spike
Cannabis Hardware
PAX Pusher
Cannabis Hardware
3d Printed Scoop (3425)
Cannabis Hardware
FlowerPot B2 Head Assembly
Cannabis Hardware
Venus Male Flower Diffuser
Cannabis Hardware
FlowerPot B1 Nut
Cannabis Hardware
FlowerPot Diffuser 22mm
Cannabis Hardware
FlowerPot Tomcat Head
Cannabis Hardware
Wave 20mm Female Flower Head
Cannabis Hardware
FlowerPot B2 Nut
Cannabis Hardware
FlowerPot 25mm Axial Enail Coil
Cannabis Hardware
FlowerPot Enail Handle
Cannabis Hardware
22mm Glass Insert (9471)
Cannabis Hardware
Airstream Titanium Coil Cover
Cannabis Hardware
Flat Coil Dab Rig Dish Fastener - Short (2862)
Cannabis Hardware
Flat Coil Dab Rig Dish Fastener Short - Cannabis Hardware
Cannabis Hardware
Foam insert (3285)
Cannabis Hardware
Heat Post with Insulator (3196)
Cannabis Hardware
Male ENail Body 14/18mm - Cannabis Hardware
Cannabis Hardware
Titanium Insert for 22mm Heads only (3503)
Cannabis Hardware
Tsunami Foam Insert (3125)
Cannabis Hardware
WOHW Titanium Coil Cover
Cannabis Hardware
FlowerPot PID Controller
Cannabis Hardware
Cartridge Heater 110v - North America (9101)
Cannabis Hardware
E-Nail Head for Torch Use (2610)
Cannabis Hardware
Heat Post With Insulator For Flowerpot
Replacement Parts
15
Cannabis Hardware
Cannabis Hardware O-ring set for Matrix Bowl
Cannabis Hardware
28mm Replacement Sic Dish (9264)
Cannabis Hardware
Gasket Replacement (9441)
Cannabis Hardware
O-Ring Set for Haze/Blaze
Cannabis Hardware
Universal Carb Cap
Cannabis Hardware
Bubble Cap (9481)
Cannabis Hardware
Tomcat Conversion Cap (3477)
Cannabis Hardware
Bell Vortex Carb Cap (9513)
Cannabis Hardware
CH Adjustable-Fit Cap (9440) - Merch
Cannabis Hardware
Hangar Thread Cover (3452)
Cannabis Hardware
Storage Lid (3420-SL) ::INVENTORY ONLY::
Cannabis Hardware
Titanium Coil Cover — WOHW (3587)
Cannabis Hardware
Universal Carb Cap - (7027) Handle Optional
Cannabis Hardware
XMT Enail Controller Replacement Module (9389)
Cannabis Hardware
Flowerpot Replacement Ruby Balls
Other Accessories
66
Cannabis Hardware
28mm Quartz Dish (9474)
Cannabis Hardware
Matrix Bowl (7066)
Cannabis Hardware
Matrix Bowl Ball Vape
Cannabis Hardware
Titanium Insert for Matrix Bowl and Haze/Blaze (3546)
Cannabis Hardware
14mm Female Post for ShovelHead Bowl (3158)
Cannabis Hardware
14mm FlowerPot Standard Glass Bowl
Cannabis Hardware
14mm Male Post for ShovelHead Bowl - Long
Cannabis Hardware
14mm Male Post for ShovelHead Bowl (3099)
Cannabis Hardware
22mm Quartz Dish for Cyclone
Cannabis Hardware
22mm Quartz Dish for Cyclone (9504)
Cannabis Hardware
22mm Quartz Insert (9498)
Cannabis Hardware
Cannabis Hardware Elev8 Injector Style Glass Bowl
Cannabis Hardware
E-nail Essentials Bundle with USA Titanium and 28mm SiC Dish (7019)
Cannabis Hardware
Flat Coil Dish Fastener - Long (2859)
Cannabis Hardware
FlowerPot Sapphire Dish 28mm
Cannabis Hardware
Oring Set for Matrix Bowl (9489)
Cannabis Hardware
Vrod Head Dish Nut (3010)
Cannabis Hardware
FlowerPot ShovelHead Bowl
Cannabis Hardware
FlowerPot Glass Bowl 18mm
Cannabis Hardware
14mm Male Post for ShovelHead Bowl - Short
Cannabis Hardware
18.8 mm Injector Style "Elev8" Glass Bowl
Cannabis Hardware
FlowerPot SiC Dish 28mm
Cannabis Hardware
10mm Male Post for ShovelHead Bowl
Cannabis Hardware
18.8 mm Male Post for ShovelHead Bowl (3098)
Cannabis Hardware
22mm Ruby Dish for Cyclone (9507)
Cannabis Hardware
CH Injector Pass-Through Bowl (Choose Size)
Cannabis Hardware
Insert en titane for Matrix Bowl and Pipe...
Cannabis Hardware
Pipe Builder DIY Bowl Inserts
Cannabis Hardware
Rev 1 Matrix Bowl
Cannabis Hardware
ShovelHead Bowl Cocobolo Handle
Cannabis Hardware
FlowerPot Hangar Base
Cannabis Hardware
Dab Tool Stand (2577)
Cannabis Hardware
Hangar Threaded Basic Heat Stand - CHOOSE OPTIONS
Cannabis Hardware
FlowerPot Hangar Heat Shield
Cannabis Hardware
18.8mm Female Glass Stand (9457)
Cannabis Hardware
Cannabis Hardware Airstream Base Station
Cannabis Hardware
FlowerPot Controller Stand
Cannabis Hardware
Hangar 3" Threaded Heat Stand Base (3438)
Cannabis Hardware
Cannabis Hardware Flowerpot B-Zero Head Assembly
Cannabis Hardware
Import 2.5" Three Stage Aluminum Grinder (9133)
Cannabis Hardware
Cannabis Hardware Three Piece Fine Grinder
Cannabis Hardware
CH 3" Three Piece Grinder (3420)
Cannabis Hardware
Two Piece Fine Grinder (3537)
Cannabis Hardware
Cannabis Hardware CH Logo Dab Mat 8"
Cannabis Hardware
Adjustable Domed Titanium Nail 14mm (2104)
Cannabis Hardware
Cannabis Hardware Cyclone Dab Bucket
Cannabis Hardware
Cannabis Hardware Titanium Insert for Matrix/Haze
Cannabis Hardware
Dab Day Tank Top - Merch
Cannabis Hardware
Domed Flux Titanium Nail (2478)
Cannabis Hardware
Domed Flux Titanium Nail (2479)
Cannabis Hardware
Domed Flux Titanium Nail 10mm (2477)
Cannabis Hardware
Domed Nail 10mm Basic (2710)
Cannabis Hardware
Domed Nail 18mm Basic (2721)
Cannabis Hardware
Domeless Titanium Nail 10mm Female (2341)
Cannabis Hardware
Domeless Titanium Nail 10mm, 14mm Female (2452)
Cannabis Hardware
Domeless Titanium Nail 14mm, 18mm - Level 1 (2485)
Cannabis Hardware
Domeless Titanium Nail 18mm Female (2345)
Cannabis Hardware
E-Nail Head for 16mm Coil - 16 Hole (2611)
Cannabis Hardware
E-Nail Head for 20mm Coil - Honey Bucket (2700)
Cannabis Hardware
Cannabis Hardware Flat Coil Enail 14/18mm
Cannabis Hardware
DIY Basic Enail Housing STL File (3350)
Cannabis Hardware
Domeless Titanium Nail 18mm Male (2344)
Cannabis Hardware
18.8mm Female 9.5" Bent Neck Super Slit Diffuser (9385)
Cannabis Hardware
FlowerPot SiC Balls 3mm
Cannabis Hardware
Cannabis Hardware Ruby Balls Flowerpot
Cannabis Hardware
Ruby Balls 6mm (9470)
Third-Party Accessories (2)
Does the Whisper come with a controller?
No. The Whisper is a heated station with coil and housing; the PID controller is plugged in at the back via XLR and must be available or purchased separately.
Which controllers fit the Whisper?
It has been tested with PID controllers from Cannabis Hardware and Auber. Since most E-Nails use the five-pin XLR standard, other common controllers also fit.
Can I also vaporise flower with the Whisper?
Yes. The housing accommodates both flower diffusers and a 25-mm concentrate banger, so it covers both material types.
What is the Whisper made from?
From 6061 aircraft aluminium, manufactured in Florida. A heat dissipation plate keeps the surface cooler than the nail.
Best Price
338.98 €
Available at StonerCornerTH
Visit Shop
Comments
No comments yet. Be the first!
Sign in to comment