Yllvape YLL 2.0 Induction Heater — Price Comparison (3 shops) 59–86 €
Last updated: 31/08/2026, 7:48 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Induction |
| Device Type | Portable |
| Brand | Yllvape |
| Power Source | Battery |
| Power Consumption | 60 W |
| Material | Dry Herb |
| Battery Type | 18650 Li-Ion 18650-Akkus vergleichen |
| Battery Count | 2 |
| Replaceable Battery | Yes |
| Charging Port | USB-C |
About this vaporizer
The YLL 2.0 is a portable induction heater for DynaVap devices: 30 to 60 W in 5 W steps, a 10–60 s timer, two replaceable 18650 cells (not included), USB-C, a display and two ceramic inserts (8 and 11 mm). Not for the HyperDyn.
Yllvape Vaporizer Key Takeaways Yllvape — vaporizer manufacturer from China Convection + hybrid heating, 3 models (portable) Range from 102.21 € to 137.93 €, available at 6+ shops
Yllvape →The YLL 2.0 from Yllvape is a pocket-sized induction heater for VapCap devices from DynaVap. Instead of a flame, a coil heats the cap in a ceramic chamber; the power can be selected from 30 to 60 watts in increments of five, while a timer limits the cycle to 10 to 60 seconds. Power is supplied by two replaceable 18650 cells, which are not included. Its successor, the YLL 3.0, is listed separately here.
See also: Angus Enhanced · Angus · Scarlet
Power and timer instead of a lighter
Inserts for different tips
Batteries and limitations
Official Resources
More Yllvape Vaporizers 2
Spec comparison
| YLL 2.0 Induction Heater | YLL 3.0 | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Induction | Induction |
| Temperature | N/A | 220°C |
| Heat-up time | N/A | 6s |
| Battery | N/A | 4200 mAh |
| Price from | N/A | 102.21€ · incl. shipping |
| YLL 2.0 Induction Heater | Angus Enhanced | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Induction | Convection |
| Temperature | N/A | 220°C |
| Heat-up time | N/A | 25s |
| Battery | N/A | N/A |
| Price from | N/A | 137.93€ · incl. shipping |
Compatible Accessories
No. The YLL 2.0 requires two 18650 cells with a continuous discharge rating of at least 10 A, which must be purchased separately. They are charged via the device's USB-C port.
All VapCaps with a standard cap – M, VonG, Omni, B, Woodwynd. According to the manufacturer, the HyperDyn is not compatible.
Using the power setting (30–60 W in 5-W increments) and the timer (10–60 s). The insertion depth of 8 or 11 mm also changes which part of the cap is heated most intensely.
The 3.0 is the successor with a new housing and support for the HyperDyn; it is listed on VapoChecker as a separate device.
Comments
No comments yet. Be the first!
Sign in to comment