Pros
- Hybrid heating for good flavor.
- Water pipe compatible.
- Session and on-demand modes.
- Pass-through charging available.
- Temp range 100-220C.
Cons
- 1500 mAh battery, only 3-4 sessions.
- 155 g weight.
- 30 s heat-up time.
XMAX XVape Fyra — Price Comparison (14 shops) 40–90 €
Last updated: 17/07/2026, 9:43 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Hybrid |
| Device Type | Portable |
| Brand | XMAX |
| Power Source | Battery |
| Temperature Range | 100°C - 220°C |
| Heat-up Time | 30 seconds |
| Battery Capacity | 1500 mAh |
| Weight | 155 g |
| Warranty | 1 year |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | Session & On-Demand |
| Temperature Control | Presets |
| Material | Dry Herb |
| Vapor Path | Glass |
| Battery Type | Internal |
| Replaceable Battery | No |
| Passthrough Charging | Yes |
| Charging Port | USB-C |
Source: XVAPE USAOfficial · Verified 19.02.2026
About this vaporizer
The XVape Fyra is a budget hybrid portable from XMAX that combines conduction and convection heating in a single compact unit. The ceramic chamber heats up in around 30 seconds, with a temperature range spanning 100 to 220°C — wider than you'd expect at this price point. That flexibility matters if you like to start low and work your way up through a session, extracting different flavor profiles as the temperature climbs.
Battery life sits at 1500mAh, which should carry you through several sessions before needing a charge. Passthrough charging means you can keep vaping while plugged in, which is a genuine convenience when you're not willing to wait. Water pipe compatibility is another standout feature — attach the Fyra to a bubbler or small bong and the vapor becomes noticeably cooler and smoother. For a device at this price, that's a useful bonus.
The hybrid heating setup sets the Fyra apart from cheaper conduction-only devices. Even heating across the chamber means better extraction and less need to stir or shake midway through a session. It won't compete with the Mighty+, the Arizer Solo 3, or anything approaching flagship territory — but that's not the point. As an entry-level device or a low-stakes travel vape, it holds its own.
Operation is simple: one button to power on, a few clicks to cycle through temperatures. The display is clear and easy to read. A mouthpiece isolation ring protects your lips during direct draws. The main drawbacks are the vapor path, which can run warm at higher settings, and the cooling system, which is basic compared to devices even slightly higher up the price ladder.
XMAX has improved its product line noticeably over the past few years, and the Fyra reflects that upward trend. Pair it with a decent grinder, use a medium-fine grind, and you'll get noticeably better results than with a coarser pack. The one-year warranty is standard for this segment, not exceptional, but adequate. For anyone curious about dry herb vaporizing who doesn't want to spend big upfront, the Fyra is a reasonable, low-risk starting point.
- Hybrid heating for good flavor.
- Water pipe compatible.
- Session and on-demand modes.
- Pass-through charging available.
- Temp range 100-220C.
- 1500 mAh battery, only 3-4 sessions.
- 155 g weight.
- 30 s heat-up time.
XMAX Vaporizers: strong performance at a fair price Key Takeaways Chinese manufacturer — known for strong value-for-money vaporizers V3 Pro: hybrid heating, replaceable 18650, USB-C, under €100 30+ models from pens to portables…
XMAX →The XVape Fyra by XMAX is a portable vaporizer with hybrid heating (convection + conduction). The heat-up time is around 30 seconds. The fixed 1500-mAh battery provides several sessions per charge. Features such as WPA compatibility and passthrough charging complete the package. Our price comparison lists it at 5 shops from 0.08 €.
See also: Starry 4 · V3 Pro · XMAX V3 Nano · Fog Pro
How Does the Heating and Temperature Control Work?
The XVape Fyra uses hybrid heating (convection + conduction). The temperature range reaches up to 220 °C, and the heat-up time is around 30 seconds.
Hybrid systems combine the advantages of both methods: fast heat-up through conduction, even extraction through convection. The result is a balanced vapour experience throughout the entire session.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporization at controlled temperatures releases over 95 % of the desired active compounds, while combustion by-products are largely avoided. Source: PubMed 16637053
How Do I Charge the Battery Properly?
The XVape Fyra has a fixed 1500-mAh battery. Passthrough charging is possible — the device can be used while charging.
How Portable and Ergonomic Is the Design?
The XVape Fyra is a portable vaporizer. It weighs 155 g — a pleasantly handy weight for daily use.
What Accessories Are Compatible?
The XVape Fyra is compatible with:
- Water pipe adapter (WPA, for cooled vapour)
Additional original accessories from XMAX complement the scope of delivery.
Conclusion
The XVape Fyra is a portable vaporizer by XMAX with hybrid heating (convection + conduction). It is aimed primarily at users who want fast heat-up and good extraction. Our price comparison shows it from 0.08 € at 5 shops.
XVape Fyra: Replaceable 18650 for Long Trips
The XVape Fyra combines a ceramic hybrid heating chamber with the convenience of a replaceable 18650 battery. For users who are often out and about, buying two to three spare batteries is recommended, so a session is never interrupted by an empty battery. Charge the cells in an external charger with individual cell monitoring; this helps you identify early when a cell is ageing. The Fyra's ceramic chamber delivers pure flavour without metallic undertones and is easy to clean. Recommended operating temperature: 180 to 200 degrees Celsius for balanced extraction.
Cleaning the Fyra Ceramic Chamber: Step by Step
After five to eight sessions, the ceramic chamber of the XVape Fyra should be cleaned. Remove the screen insert and tap it out on a white sheet of paper. Wipe the chamber wall with a cotton bud lightly moistened with Isopropyl alcohol 70 %. The glass mouthpiece attachment can be cleaned under lukewarm water; dry it thoroughly. Avoid abrasive tools on the ceramic surface, as scratches can break open the pore structure and bind residues. A well-kept clean Fyra shows hardly any changes in flavour even after hundreds of sessions.
Fyra Tips for Out and About
For use out and about, a spare 18650 battery in a protective case is recommended. The Fyra's ceramic chamber holds around 0,2 g — ideal for solo sessions. Taking prepared loads in small containers saves time when refilling. The robust housing can also withstand the occasional drop from pocket height.
More XMAX Vaporizers 4
Spec comparison
| XVape Fyra | Starry 4 | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Hybrid | Conduction |
| Temperature | 100°C - 220°C | 100°C - 240°C |
| Heat-up time | 30s | 30s |
| Battery | 1500 mAh | 2550 mAh |
| Price from | 40€ | 57€ |
| XVape Fyra | V3 Pro | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Hybrid | Hybrid |
| Temperature | 100°C - 220°C | 100°C - 220°C |
| Heat-up time | 30s | 15s |
| Battery | 1500 mAh | 2600 mAh |
| Price from | 40€ | 55€ |
Compatible Accessories
Variants & Editions
The XVape Fyra is a portable vaporizer by XMAX with hybrid heating (convection + conduction).
The XVape Fyra uses hybrid heating (convection + conduction). Convection and conduction work together for even extraction throughout the entire session.
The XVape Fyra reaches operating temperature in around 30 seconds.
No, the XVape Fyra has a fixed 1500-mAh battery.
No, the XVape Fyra is not designed for dosing capsules.
Yes, the XVape Fyra is water-pipe compatible (WPA). With a suitable adapter, it can be connected to a bong.
XMAX provides a 1 year warranty for the XVape Fyra.
Our price comparison shows current prices from various online shops.






Comments
No comments yet. Be the first!
Sign in to comment