Fenix Mini+ is a portable dry-herb vaporizer. VapoChecker compares current offers from €93.48 (plus shipping) across 4 shops (as of Oct 16, 2026).Price basis: Item price excluding shipping and coupons
Prices range by €14.07 — comparing is worth it. Possible import duties are added depending on the delivery country.
The Fenix Mini+ by Fenix is a portable convection vaporizer. Temperature range spans 120 to 221 degrees Celsius with a 25-second heat-up time. The battery offers 1600 mAh capacity. Currently from 103.99 € across 4 shops (as of Oct 16, 2026; Code VAPOCHECKER-FENIX-FENIX-MINI-PLUS · incl. shipping).
The Fenix Mini+ by Weecke is, according to the manufacturer, a compact convection vaporizer (the product page also mentions a hybrid system in one place) with a 1600 mAh battery, USB-C, OLED display, and temperature selection from 120 to 221 °C in 1 °C increments. It heats up in under 30 seconds, vibrates when ready, weighs 136 g, and shuts off after four minutes of inactivity; the chamber holds 0.15 g, and a quartz capsule for concentrates is included. Water pipe adapter, herb dosing capsules, and pass-through charging are not mentioned by Weecke. One year warranty. Currently from 103.99€ Code VAPOCHECKER-FENIX-FENIX-MINI-PLUS · incl. shipping · Import charges may apply.
Power comes from a built-in 1,600 mAh battery, charged via USB-C. Despite its small form factor, it offers a quartz capsule for concentrates and a removable mouthpiece screen. You can see the current price in the price comparison above.
The Fenix Mini+ is the smallest device in the Fenix range and has been optimized for maximum discretion. At around 136 grams it slips easily into a trouser pocket, yet still brings the most important features of the larger models: digital temperature control, convection heating, and an quartz capsule for concentrates. It is manufactured by Chinese specialist Weecke under the Fenix brand.
As the Plus variant, the Mini+ is the successor to the original Fenix Mini. Compared to the original it heats up more willingly, offers greater airflow, and an extended temperature range starting from 120 °C. Anyone looking for a genuinely small device for on the go who does not plan hour-long extended sessions will find in the Mini+ an affordable, versatile companion.
Convection Heating According to the Manufacturer's Technical Specification
The technical product page lists the Fenix Mini+ as a convection device. When drawing, heated air is passed through the material; the manufacturer does not specify an additional conduction heating element.
The compact format combines air heating with digital temperature control and a heat-up time of around 25 seconds. Draw speed and fill amount continue to influence extraction.
Compact Build: 136 g and a Small Chamber
The Mini+ is a genuine lightweight at around 136 grams and sits discreetly in the hand; this makes it the ideal travel or backup device: it fits in any pocket and barely attracts attention on the go.
The trade-off for the small form factor is the small chamber, which holds around 0.15 grams of herb. That is enough for a solo session, but little for several people or long rounds. Anyone wanting to share the Mini+ with another person or run extended sessions will need to top it up in between – this is where the larger sibling model Fenix Pro comes into its own. For solo use on the go, though, the small chamber is no disadvantage; it actually saves material.
Setting the Temperature: 120 to 221 °C
The Fenix Mini+ offers full digital temperature control from 120 to 221 °C in one-degree increments. The low starting value of 120 °C is a genuine bonus: it lets you begin in a very flavor-focused and gentle way, which many larger devices with a higher lower limit do not allow. As a guide:
170–185 °C – flavor-focused, light vapor, lots of aroma
185–195 °C – balanced, a good mix of flavor and vapor
195–210 °C – dense clouds, stronger effect
Anyone seeking flavor starts low and increases over the session; with more finely ground herb it is worth choosing the temperature 5 to 10 °C lower. Thanks to the one-degree increments you can hit your personal sweet spot precisely.
Display and Haptic Feedback
A discreet display on the Mini+ shows the temperature along with a timer, so you can keep an eye on the target temperature and remaining session time. Despite the small form factor you therefore do not need to guess which level the device is currently at.
The haptic feedback is particularly handy: as soon as the set temperature is reached, the device vibrates briefly. You do not need to stare at the display – the vibration tells you when you can draw; this prevents the most common beginner mistake: drawing too early and getting only warm air instead of vapor.
Heat-Up Time: Ready in Around 25 Seconds
The Fenix Mini+ is ready to use after around 25 seconds; the manufacturer's stated figure of around 25 seconds is a good value for the compact convection device. In practice the exact time depends on the target temperature: at 180 °C it is faster than at 221 °C.
The brief vibration reliably signals the moment you can get started; this way you do not waste any herb on a premature draw – especially with the small 0.15 g chamber, every fill counts.
Battery: 1,600 mAh, Charging, and Battery Level Check
Inside the Mini+ sits a fixed, non-removable 1,600 mAh lithium polymer battery. This keeps the weight low and is sufficient for around 35 minutes of continuous use per charge – with the small chamber, that means several solo sessions. Charging is via USB-C; A duration for a complete charge is not documented.
One clever detail: you can check the battery level at any time with a brief button press – even when the device is switched off. This lets you know before heading out whether there is enough charge left for on the go; the battery is not replaceable; anyone wanting to vape for longer can top it up via a power bank in between. As a travel or backup device the capacity is generally more than sufficient.
Mouthpiece and Removable Screen
The mouthpiece of the Fenix Mini+ contains a removable mouthpiece screen. Replacement screens and replacement mouthpieces are available separately as accessories.
Fenix recommends cleaning the chamber, mouthpiece, and screens regularly with a small brush or a cotton bud and isopropyl alcohol. Allow all parts to dry completely before reassembly.
Water Pipe Adapter: Not Specified by Weecke
Weecke does not list a water pipe adapter (WPA) for the Mini+ – neither on the product page nor in the manufacturer's accessory range; the manufacturer does not state whether a third-party adapter fits the mouthpiece.
During consecutive draws the short vapor path of the compact housing warms up. Without water cooling, a lower temperature or a brief pause between draws helps; anyone wanting to vape through water on a permanent basis should opt for a device for which the manufacturer specifies an adapter.
Dosing Capsules: No Manufacturer Specification
Weecke does not list herb dosing capsules for the Mini+. Instead, the box includes a quartz capsule for concentrates, which is placed into the chamber.
Anyone wanting to top up the small 0.15 g chamber quickly on the go can prepare ground herb at home in a small dosing container and fill it loosely on site – the manufacturer does not specify a capsule system for herb.
Step-by-Step Operation
Operation is mechanical and requires no app:
Switch on: Press the power button several times in quick succession. The display wakes up and shows the target temperature.
Fill the chamber: Remove the mouthpiece, loosely fill with medium-fine ground herb (do not pack it); for concentrates, insert the quartz capsule.
Choose the temperature: Set the desired number of degrees using the buttons (120–221 °C).
Heat up: After around 25 seconds the device vibrates – the target temperature has now been reached.
Draw: Inhale slowly and evenly. With the small chamber, shorter draws are sufficient.
You can check the battery level at any time with a brief button press. To switch off, press the power button several times again.
How to Get the Best Flavor
A few steps make all the difference with the Mini+:
Grind: medium-fine and even. With finer herb, lower the temperature by 5–10 °C.
Fill amount: fill the small chamber loosely, do not pack it – the airflow must be able to pass through.
Temperature ramp: start low (around 170 °C) for full flavor, then increase to release the remaining active compounds.
Take breaks: During consecutive draws the short vapor path warms up – brief pauses between draws keep the vapor more pleasant; Weecke does not list a water pipe adapter for the Mini+.
Because the chamber is small, the Mini+ is particularly efficient: you need little material per session and still extract plenty of aroma at the right temperature.
Fenix Mini+ vs. Fenix Pro
Within the Fenix family, the Fenix Pro is the larger, more enduring sibling model. They share the same heating principle; the differences lie in the chamber, battery, and temperature range:
Heating principle: Both models work with convection according to the manufacturer's technical specifications. The Pro adds a titanium chamber and the ECA airpath.
Battery: 1,600 mAh on the Mini+ versus 2,300 mAh on the Pro – significantly more runtime with the Pro.
Temperature: The Mini+ starts as low as 120 °C, while the Pro only starts at 160 °C. For very low-temperature flavor experiments the Mini+ offers greater scope.
Size and chamber: The Mini+ is more compact with a smaller 0.15 g chamber; the Pro is larger and better suited to longer sessions.
Summary: The Mini+ is the choice when stealth, trouser-pocket format, and a low starting temperature are the top priorities; the Fenix Pro is the device for longer sessions, more battery life, and a larger chamber.
The Mini+ in the Lineup: NEO and 2 MAX
Weecke tiers the Fenix range from small to large; the Mini+ is the entry-level and stealth model; above it sit more feature-rich devices:
Fenix NEO: Full convection with titanium chamber, positioned one step higher.
Fenix 2 MAX: the top model with a removable titanium chamber and optional glass chamber.
The Mini+ fills the niche of maximally compact devices: it brings the core Fenix virtues – digital temperature control and convection heating – into the smallest form factor. Anyone wanting more chamber volume, more battery, or a titanium chamber steps up one tier.
How Do I Clean and Maintain My Vaporizer?
Fenix recommends regular cleaning of the chamber, mouthpiece, and screens with a small brush or a cotton bud and isopropyl alcohol. All parts must dry completely before reassembly.
Switch the device off and allow it to cool before cleaning. Do not allow any liquid to enter the electronics. Refer to the instructions for disassembling the mouthpiece.
The Fenix Mini+ is the right choice if you are looking for the smallest, most discreet vaporizer possible for on the go and want convection flavor without sacrificing convenience features such as precise degree-by-degree temperature selection, the quartz capsule for concentrates, and a removable screen. The low starting temperature from 120 °C and the light weight make it a versatile travel and backup device.
It is less suitable if you plan longer or shared sessions (in that case the larger Fenix Pro with its greater battery and chamber volume is worth considering). Anyone who can live with the small chamber and the non-removable battery gets an affordable, well-equipped pocket device in the Mini+.
A compact dry-herb vaporizer that the manufacturer's technical product page lists as a convection device; it regulates from 120 to 221 °C, has a built-in 1600 mAh battery, USB-C charging, and an quartz capsule for concentrates.
The technical product page states convection heating: heated air flows through the material when you draw. Still, the introduction on the same product page refers to a hybrid system.
The chamber holds around 0.15 grams of herb – designed for solo sessions. You will need to reload for multiple people or longer rounds; anyone wanting more volume should opt for the larger Fenix Pro.
The battery is 1600 mAh and is built in; it lasts for around 35 minutes of continuous use per charge, meaning several solo sessions; it charges via USB-C . The battery level can be checked at any time with a button press, even when the device is switched off.
The mouthpiece screen is removable. Replacement screens and replacement mouthpieces are available separately. Fenix recommends cleaning with a small brush or a cotton bud and isopropyl alcohol; all parts must dry completely before reassembly.
Weecke does not list a water pipe adapter for the Mini+ – neither on the product page nor in the accessories range. Anyone who prefers cooler vapor from the short vapor path can lower the temperature or take short breaks between draws.
Around 25 seconds, depending on the target temperature; a brief vibration signals that the set temperature has been reached.
The Mini+ is the more compact convection model with a 1600 mAh battery, a smaller chamber, and a starting temperature from 120 °C. The Fenix Pro is larger, has a 2300 mAh battery, and is better suited to longer sessions.
No. The Mini+ is operated purely mechanically via the buttons and display, with no app or Bluetooth.
For full flavor, start at 170–185 °C; for a balanced experience, aim for 185–195 °C; for dense clouds, go towards 195–210 °C. Thanks to the low starting point from 120 °C, very gentle, flavor-focused draws are also possible.
Sign-in runs through Google or Microsoft, which process data themselves in the process. We only receive your email address, your name and an account identifier, and store them to manage your account. We do not pass on your data for advertising purposes.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Comments
No comments yet. Be the first!
Sign in to comment