Cannabis Hardware FlowerPot B1
Pros
- Pure convection heating
- Up to 427°C operating temperature
- Water pipe compatible
- Dosing capsules supported
Cons
- 180-second heat-up time
- Desktop only (AC)
- Not for beginners
Cannabis Hardware FlowerPot B1 — Price Comparison (1 Shop) 444–559 €
Last updated: 06/09/2026, 9:41 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
The FlowerPot B1 by Cannabis Hardware is a portable convection vaporizer. Heat-up time is 180 seconds. Currently from 451.30 € across 1 shops (as of Sep 6, 2026; incl. shipping).
Specifications
| Specifications | |
|---|---|
| Heating Method | Convection |
| Device Type | Ball Vape |
| Brand | Cannabis Hardware |
| Power Source | AC Power |
| Heat-up Time | 180 seconds |
| Weight | 45 g |
| Warranty | 1 year |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
Source: OfficialOfficial, OfficialOfficial, OfficialOfficial · Verified 19.02.2026
About this vaporizer
The Cannabis Hardware FlowerPot B1 is a desktop ball vape with pure convection heating and AC operation that reaches temperatures up to 427°C. The heating system uses heated balls (Rubies) in a steel basket through which hot air is passed - this creates very dense, hot convection steam. The heating time is around 180 seconds.
The device is compatible with hookahs and supports dosing capsules. As an AC-powered desktop device, the B1 is not portable. Like the FlowerPot B2, the B1 is intended for experienced users looking for desktop ball vape performance and maximum efficiency.
The difference to the B2: The B1 works with pure convection, while the B2 offers hybrid heating. For users who prefer pure convection vapor quality in a ball vape format, the B1 is the more consistent choice.
- Pure convection heating
- Up to 427°C operating temperature
- Water pipe compatible
- Dosing capsules supported
- 180-second heat-up time
- Desktop only (AC)
- Not for beginners
Cannabis Hardware Vaporizer Key Takeaways Cannabis Hardware — vaporizer manufacturer from USA Conduction + convection + hybrid heating, 7 models (desktop, ball vape) Range from 316.37 € to 452.14 €, available at 5+ shops
Cannabis Hardware →The FlowerPot B1 from Cannabis Hardware is a desktop ball vaporizer with a dedicated flower head. The B1 version uses a single head for dry herbs — no dual-use required. Stainless steel balls store the heat, and a PID controller keeps the temperature stable. Vapour production is enormous, with top-tier flavour quality. In the price comparison, the B1 costs between 200 and 350 euros.
See also: Cannabis Hardware Blaze Pipe · Zenleaf Moab · VMAX Injector Ball Vape · Zion Wireless Enail
Construction and how it works
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95 % of the desired active compounds while largely avoiding combustion by-products. Source: PubMed 16637053
Temperature and vapour quality
B1 vs. B2 comparison
Accessories and setup
B1 vs B2: The key differences
The FlowerPot B1 is the simplified version of the B2 and focuses exclusively on dry herbs. While the B2 offers an injector attachment for simultaneous use with concentrates, the B1 omits this function. This makes the setup more compact and operation simpler. The core physics remain identical: heated balls generate instant convection. For users who only want to vaporise herbs, the B1 offers the same vapour experience at a lower price and with fewer accessories to clean.
PID controller and temperature stability
Both FlowerPot models work with an external PID controller that drives the heating coil. PID stands for Proportional-Integral-Derivative and describes a control loop that compensates for temperature fluctuations in real time. The controller measures the current temperature at the heater head and continuously adjusts the power. During a strong draw that pulls heat from the balls, the controller immediately increases the power. The result is a temperature deviation of no more than two to three degrees — even during quick, consecutive draws.
Accessories and upgrades
There are various attachments from Cannabis Hardware for the FlowerPot B1. The standard head holds around 0.15g of herb material. A larger head (Bowl XL) is available separately and doubles the capacity for group sessions. For water filtration, thick-walled 18mm bongs are recommended — the FlowerPot sits directly on the joint. A titanium screen at the bottom of the head prevents material from falling into the bong.
Official Resources
More Cannabis Hardware Vaporizers 1
Spec comparison
| FlowerPot B1 | FlowerPot B2 | |
|---|---|---|
| Type | Ball Vape | Ball Vape |
| Heating | Convection | Convection |
| Temperature | 427°C | 427°C |
| Heat-up time | 180s | 300s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 451.30€ · incl. shipping | N/A |
| FlowerPot B1 | Zenleaf Moab | |
|---|---|---|
| Type | Ball Vape | Desktop |
| Heating | Convection | Convection |
| Temperature | 427°C | 343°C |
| Heat-up time | 180s | 180s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 451.30€ · incl. shipping | 315.79€ · incl. shipping |
Compatible Accessories
Adapters
7
Bags & Cases
10
Replacement Parts
15
Other Accessories
77
Any bong with a 14mm or 18mm joint will work. A sturdy piece with a wide base is recommended, as the FlowerPot head has a bit of weight to it.
The B0 is the entry-level model without balls, while the B1 uses stainless steel balls for better heat retention and denser hits.
Comments
No comments yet. Be the first!
Sign in to comment