High Labs Trippy 2

The Trippy 2 is a conduction vaporizer; the chamber holds a maximum of 0.25 g.

First, let the device cool down completely (5 to 10 minutes). Then soak the glass tube, mouthpiece, and base piece in isopropanol (90%+) — 10 to 15 minutes is sufficient; the silicone should not soak for more than 30 minutes. Remove crumbs first by dry-scraping with a blunt tool (NO sharp objects, or the screen will be punctured). Wipe the chamber dry with a cotton swab, then go over it again with an isopropanol-dipped swab — if the swab squeaks, it is clean. For safety, run a second isopropanol-dipped swab through the vapor channel once more. Before reassembly, let all parts dry completely, then run one empty heat cycle at the highest setting.

Three safety points: (1) Do not let isopropanol run into the electronics — apply sparingly at the chamber-to-body junction. (2) Isopropanol degreses skin strongly — moisturise your hands after cleaning. (3) If the vapor tastes of isopropanol on the first draw after cleaning: DO NOT inhale. Isopropanol vapors are generally not intended for the lungs. Leave to dry longer and run another empty heat cycle at the highest setting until the smell has completely gone.

The battery grew from 2,000 to 2,600 mAh (+30% battery life, roughly 80 instead of 60 minutes). USB-C charges 75% faster. A vibration signal indicates when the target temperature has been reached. The five temperatures (160, 175, 190, 205, 220 °C) are more evenly distributed — even the lowest setting delivers more flavor than on its predecessor. The chamber, glass vapor path, and body have remained identical.

The Trippy 2 is pure conduction: more draw resistance, simple operation, dense vapor from draw one. The Veazy (convection hybrid) delivers a smoother draw and slightly more convection clarity, but usually costs more. For an entry-level device in the budget class in a pocket-friendly form factor, the Trippy 2 is the better choice.

Both are possible. Actively drawing with your lips on the mouthpiece delivers denser clouds because more airflow passes through the hot chamber. Alternatively, you can let the vapor pass through the device passively 2 to 3 times without actively inhaling — great for flavor sessions at settings 1 to 2 (160–175 °C). During a second consecutive session, the body becomes noticeably warmer — this is normal.

The list price is around 85 euros. At Polish shops you can currently find it for around 87 euros (converted from 379 PLN). Up-to-date prices including shipping are shown in our price comparison above on the page — the spiders crawl every 24 hours.

Yes. Operated via two buttons, five pre-set temperatures, a vibration signal when ready, and five LED battery dots as an indicator — no app, no display reading learning curve, no calibration of draw behavior. Recommended starting point: 175 to 190 °C, which delivers flavor-focused vapor without any harshness.

Yes. After approximately 7 minutes without any interaction (no button press, no inhalation), the device switches off automatically. This protects the 2,600 mAh battery and prevents accidental heating if you put the Trippy 2 in your pocket without switching it off. To restart, hold the button down.

No. The 2,600-mAh lithium-ion battery is permanently built into the stainless-steel housing and cannot be removed without tools. In the event of wear or a defect, the device is returned via the manufacturer's warranty (2 years, 3 years with registration). Battery cycle lifespan is typical for this battery class — several years under normal use.

Before the very first session: wipe out the chamber once with a cotton swab and isopropyl alcohol, then dry-fire three to four times at the highest setting (220 °C) without any material, so that manufacturing residues burn off. Grind size: according to the manufacturer's instructions, medium-fine — too fine clogs the airflow, too coarse falls through the bottom screen. If the brush does not fit through the glass tube: cotton swabs with a paper stem or pipe cleaners from a tobacconist work just as well.