No shop prices are currently available for this vaporizer. Please check back later.
View alternatives →| Heating Method | Hybrid |
| Device Type | Butane Vaporizer |
| Brand | DynaVap |
| Power Source | Butane/Flame |
| Dosing Capsules | View dosing capsules |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Glass |
| Passthrough Charging | No |
| Charging Port | Not needed (no battery) |
Specification sources: dynavap.comManufacturer, dynavap.com / policies/warranty-policyManufacturer, dynavap.com / products/the-h2Manufacturer
The DynaVap H2 is a manual, battery-free herb vaporizer from a collaboration with American Helix Glass. The complete device combines the approximately 74 mm long American Helix glass midsection with the gold-colored Helix Titanium Tip and a Captive Cap. The Venturi geometry in the glass swirls the airpath; an anti-roll form prevents the device from rolling away.
The Helix Tip weighs slightly more than 3 g according to DynaVap, features three convection ports with internal air channels, and supports Adjust-a-Bowl for a smaller chamber setting. Standard dosing capsules and DynaCoil are listed by the manufacturer as compatible. The H2 as a whole, however, has neither a published weight nor a reliable fixed temperature range.
The Cap is heated with a torch or compatible induction heater until the click. This is manual hybrid heating without a display or precise degree-level selection. According to the manufacturer, the H2 does not fit in the DynaStash or SlimStash. The official US and EU pages currently list the model as sold out; the price comparison shows only retailer offers that are actually available.
See also: M7 TwoToniuM · M7 · HyperDyn T.H.C. · HyperDyn
The H2 is aimed more at DynaVap enthusiasts and glass lovers than at users looking for the most robust everyday device. Its American Helix glass midsection makes the airpath visible and the complete combination rather unusual. Anyone who frequently transports the device or risks dropping it will find a metal stem more practical. An H2 listing should refer to the complete device and not merely the separately available glass midsection.
The glass midsection is approximately 74 mm long according to the manufacturer and accepts standard tips with an 8 mm fitting. Its patented Helix Venturi geometry is designed to generate a swirling airflow. A shaped anti-roll feature helps prevent the device from rolling away. Descriptions such as "cooler" or "more flavorful" are manufacturer descriptions of the draw experience, not guaranteed measured values.
The gold-colored Helix Tip weighs slightly more than 3 g according to DynaVap. Three convection ports and internal channels improve airflow guidance; thicker chamber walls are said to roast more evenly. The DuraDyn surface is a scratch-resistant manufacturer treatment. This tip specification must not be confused with the unknown total weight of the H2.
Adjust-a-Bowl allows the CCD to be placed in a smaller chamber position. The manufacturer also states the Helix Tip is compatible with standard dosing capsules and the DynaCoil. DynaVap does not publish a fixed weight in grams for the complete H2; actual fill amounts depend on position, material, and packing method.
The H2 has no battery, no display, and no precise temperature selection in degrees. The Captive Cap is heated by rotating it steadily with a torch or inside a compatible induction heater. When the heating click sounds, the heat source is removed; before a new cycle, one waits for the cooling click. Times given in seconds are technical guidelines only and vary with flame, distance, cap, and surroundings.
The complete H2 consists of the American Helix Glass Midsection, Helix Titanium Tip, and Captive Cap. DynaVap explicitly states that it does not fit in the DynaStash or SlimStash. When comparing prices, completeness, shockproof shipping packaging, return policies, and a suitable separate case all matter. Manufacturer pages showing sold-out status are no indication of available stock at retailers.
 DynaVap H2 | ||||
|---|---|---|---|---|
| Price from | N/A | 75.14€ · Code VAPOCHECKER5 · incl. shipping | 80.35€ · Code VAPOCHECKER · incl. shipping | 183.15€ · Code VAPOCHECKER · incl. shipping |
| Type | Butane | Butane | Butane | Butane |
| Heating | Hybrid | Hybrid | Hybrid | Hybrid |
| Battery | Butane | Butane | Butane | Butane |
| Weight | N/A | 17 g | 26 g | 31 g |
Green = better value
Open in full comparison →No. The H2 is a complete manual DynaVap with an American Helix glass midsection. The manufacturer does not mention a direct water filter fitting.
American Helix Glass Midsection, Helix Titanium Tip, and Captive Cap. A torch or induction heater is not part of the stated contents.
DynaVap states approximately 74 mm for the glass midsection only, not for the entire assembled device. We therefore do not list an invented total length.
DynaVap does not publish a reliable total weight. Only the Helix Titanium Tip is specified at slightly more than 3 g.
No. The cap provides a click signal, but no digital or degree-precise temperature setting.
Yes. DynaVap lists the Helix Tip as compatible with standard dosing capsules and the DynaCoil.
No. The manufacturer explicitly rules out both the DynaStash and the SlimStash; a dedicated shockproof case is advisable.
Comments
No comments yet. Be the first!
Sign in to comment