Vices Adaptaball is a ball vape. VapoChecker compares current offers from €357.10 (plus shipping) across 1 shop (as of Oct 19, 2026).Price basis: Item price excluding shipping and coupons
The Adaptaball by Vices is a desktop hybrid vaporizer. Heat-up time is 180 seconds. Currently from 357.10 € across 1 shop (as of Oct 19, 2026; incl. shipping).
| Heating Method | Hybrid |
| Device Type | Ball Vape |
| Brand | Vices |
| Power Source | AC Power |
| Heat-up Time | 180 seconds |
| Dimensions | 14.5 x 5.0 x 5.0 cm |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb & Concentrates |
| Vapor Path | Metal |
| Charging Port | Mains power (AC) |
Specification sources: Vices (manufacturer)Manufacturer (Recorded source check: 12.10.2026), Herbistry420Review
The Adaptaball from Vices is a ball vaporizer, a desktop device category that has earned a loyal and enthusiastic following among experienced users. The core principle involves a heated element — typically a quartz or ceramic ball — that stores and radiates heat evenly into the airstream passing through your material. The result is convection-dominant vaporization with a flavor clarity that many find hard to go back from. Vices has designed the Adaptaball as a plug-in desktop unit, which means consistent power delivery without any battery degradation over time. Maximum temperatures reach 282 degrees Celsius, substantially higher than most portables, enabling rapid, dense draws at full efficiency. Heatup takes around 180 seconds, typical for this style of device and worth factoring into your session planning. The Adaptaball uses hybrid heating — combining convection-forward airflow with some conductive contact — which helps ensure even, thorough extraction across the entire chamber. Water pipe compatibility is practically essential for a device like this, and the Adaptaball accommodates it well. Run through a quality water piece, the already excellent vapor becomes smoother and cooler, allowing for longer, more comfortable sessions. This category tends to convert skeptics quickly. If you have never tried a ball vaporizer and you take your desktop vaporizing seriously, the Adaptaball is a compelling entry point.
At its core sits the octagonal Grade 2 titanium head with a unique pentagram airflow pattern. Filled with zirconia balls, cut ruby corundum gems, or stainless steel star coins, the air gets superheated before passing through your material. The result: dense, flavorful vapor on demand.
Ball vapes are a category of desktop vaporizers that use heated balls as thermal mass. Air flows through the hot balls, reaching the desired temperature before passing through the herbal material to extract active compounds via convection or conduction.
The Adaptaball takes this principle further: the octagonal titanium head features a unique pentagram airflow pattern for even heat distribution. Instead of just one ball type, Vices includes three different materials – each changes the thermal properties and extraction characteristics.
| Material | Property | Vapor Profile | Best For |
|---|---|---|---|
| Zirconia Balls | High heat retention | Dense, powerful vapor | Intense sessions, groups |
| Ruby Corundum | Even heat distribution | Flavorful, smooth | Flavor sessions, solo use |
| Stainless Steel Stars | Fast heat-up | Direct, powerful | Quick hits on demand |
Tip: You can mix materials – try zirconia as a base with a few ruby corundum stones on top for a combination of density and flavor.
Not just for dry herb: Thanks to precise temperature control and the 25mm coil, the Adaptaball also works for concentrates and dabs with compatible bangers. One reviewer completely replaced his Volcano with the Adaptaball.
What sets the Adaptaball apart from many other ball vapes: you can switch between two heating methods without buying anything extra. Both attachments are included in the kit.
Hot air is pushed through the material without direct ball contact. Result: pure flavor, gentle extraction, ideal for flavor sessions at lower temperatures (180–220°C). Active compounds are released evenly, and the material lasts longer.
The material has direct contact with the hot balls. Result: denser clouds, faster extraction, ideal for intense sessions at higher temperatures (220–300°C). More thorough extraction, but material is used up faster.
| Feature | Injector | Diffuser |
|---|---|---|
| Heating Method | Convection | Conduction |
| Flavor | Pure, nuanced | Rich, intense |
| Cloud Density | Light to medium | Dense, visible |
| Material Usage | Efficient | Faster |
| Best For | Low temps, flavor | High temps, clouds |
Many users switch depending on mood: the Injector for light flavor hits during the day, the Diffuser for thorough extraction in the evening.
The Adaptaball is powered by the included Classic Single PID Controller. PID stands for Proportional-Integral-Derivative – a control system that maintains precise temperature and compensates for fluctuations.
| Parameter | Value |
|---|---|
| Temperature Range | 150°C – 400°C |
| Heat-up Time | Approx. 2 minutes |
| Coil | 25mm Axial Coil, 8 wraps |
| Power Source | Mains cable (AC) |
| Display | Digital readout showing current and target temperature |
Recommended temperatures: Flavor sessions with the Injector at 180–220°C, intense sessions with the Diffuser at 240–300°C. Higher temperatures (300–400°C) are for experienced users only – extraction is extremely fast and intense.
Important: The PID controller reaches target temperature in about 2 minutes – but the balls themselves need 8–10 minutes of heat soak to be fully heated through. Only then does the Adaptaball deliver its full performance. Injector mode allows shorter pre-heating, while Diffuser mode benefits from a full heat soak.
The Adaptaball is available in two versions: 220V (Europe, Australia) and 110V (USA, Canada). Make sure to order the correct version for your country.
The three included ball materials are the core of the Adaptaball system. Each material has physical properties that fundamentally change the vapor.
Zirconia has extremely high heat capacity – the balls store a lot of energy and release it slowly. Even with strong draws, temperature stays consistent. Ideal for group sessions where multiple people take turns.
Corundum distributes heat very evenly across its entire surface. No hot spots, no cold areas. The result is smooth, flavorful vapor – perfect for flavor enthusiasts who vape at lower temperatures (180–200°C).
The star-shaped stainless steel elements have a large surface area due to their shape and heat up quickly. Heat is transferred directly and powerfully. Ideal when you want fast, intense hits without waiting.
You are not limited to one material. Many users experiment with combinations:
Beyond the three included materials, experienced users recommend sapphires as an optional upgrade. According to community testing, sapphires offer the best heat transfer and purest flavor of all ball materials. They are not included in the kit but can be purchased separately.
The Adaptaball is not just for dry herb: the hot coil also fits standard 25mm bangers and slurpers for concentrates. Vices offers various bangers, carb caps, and pearls as accessories. The precise PID temperature control eliminates the need for a separate torch.
The PID controller is powered via a mains cable and heats the coil to the set temperature. Once the heating element is ready, you lift it wirelessly from the docking station and place it on the bowl. No cable between you and your vaporizer during the session.
The included anodized aluminum docking station is more than just a stand:
Everything has its designated spot – no hot parts lying around loose, no searching for tools during a session. Especially during group sessions, the docking station keeps things organized and safe.
Note: The hex key for adjusting the docking station is included in the kit.
The docking station attaches to the PID controller with two rubber bands – one on each side. The bands go from the bottom of the controller up into the docking station. By positioning the station slightly further back, you can wrap the coil cable neatly around it with minimal slack.
The Adaptaball comes with two Titanium Cups for the Adaptabowl – so you can adjust the fill amount to your needs.
The large cup holds a full load for extended solo sessions or group rounds. At low temperatures with the Injector, multiple draws are possible before the material is spent.
The smaller cup is designed for targeted, efficient doses – less material, same vapor quality. Especially economical when you are vaping solo and do not need a full bowl.
The bowl itself features both 14mm and 18mm glass joints – compatible with virtually any commercially available bubbler or water pipe. The Everlasting Titanium Screens (Grade 2 titanium) are included and last practically forever under normal use – no regular replacement needed.
| Cup | Best For | Material |
|---|---|---|
| Large | Groups, long sessions | Grade 2 Titanium |
| Microdose | Solo, quick hits | Grade 2 Titanium |
Beyond the included Adaptabowl, the Adaptaball also works with standard 25mm bangers and Ed TNT Matrix bowls. This versatility makes the Adaptaball especially attractive for users who already own glass accessories.
Grade 2 titanium is extremely low-maintenance and corrosion-resistant. All titanium parts of the Adaptaball can be safely soaked in isopropyl alcohol.
Important: Never submerge the PID controller or power cable in liquid. The titanium screens are robust enough to withstand intense use without burning through or warping – replacement is generally not necessary.
Important: Before the very first use, heat the element to 350–400°C for 10–20 minutes to burn off factory residue. Perform this burn-off separately for each ball material – once with zirconia, once with ruby corundum, and once with stainless steel stars. Only then use it with herbs for the first time.
Clean the 14mm/18mm glass adapter on the bowl regularly to prevent it from getting stuck due to residue build-up. A brief soak in ISO reliably dissolves any buildup.
The Adaptaball Kit is a complete package – everything you need to get started right away:
Not included: Bubbler or water pipe. The Adaptaball works with any 14mm or 18mm glass piece – from simple bubblers to full-sized bongs.
Optional accessories: Vices offers additional coils, bowls, and ball sets as separate items.
| Specification | Value |
|---|---|
| Heating Method | Hybrid |
| Temperature Range | 150–400 °C |
| Heatup Time | ~120 sec |
| Power Source | AC Power |
| Weight | 200 g |
| Water Pipe | Yes |
| Dosing Capsules | No |
| App Control | No |
Same device type and a similar price; matching heating methods come first. Size and features may differ.
 Vices Adaptaball | ||||
|---|---|---|---|---|
| Price from | 357.10€ · incl. shipping | 98.17€ · incl. shipping | N/A | N/A |
| Type | Ball Vape | Butane | Ball Vape | Ball Vape |
| Heating | Hybrid | Convection | Convection | Hybrid |
| Temperature | 282°C | N/A | 400°C | 191°C - 254°C |
| Heat-up time | 180s | 20s | N/A | N/A |
| Battery | N/A (AC) | Butane | N/A (AC) | N/A (AC) |
Green = better value
Open in full comparison →A ball vape is a desktop vaporizer that uses small balls made of heat-resistant material as thermal mass. The balls are heated, air flows through them and reaches the desired temperature. The Adaptaball uses this principle with three different ball materials (zirconia, ruby corundum, stainless steel), each producing different vapor profiles.
The Injector provides pure convection: hot air flows through the material without direct contact with the balls, producing mild, flavorful vapor. The Diffuser works via conduction: the material touches the hot balls directly for denser clouds and faster extraction. Both attachments are included in the kit.
Each material has its own character. Zirconia retains a lot of heat for dense hits – ideal for groups. Ruby corundum distributes heat evenly and is great for flavor sessions at low temperatures. Stainless steel stars heat up fast and deliver powerful vapor. You can also mix materials for custom profiles.
Yes, the Adaptaball is shipped without a bubbler. However, the Adaptabowl has both 14mm and 18mm glass joints, so virtually any commercially available bubbler or water pipe will fit. No special Vices accessories required.
Temperature is controlled via the included PID controller. Set your desired temperature on the display – the range goes from 150°C to 400°C. The heating element takes about 2 minutes to reach the target. Recommendation: 180–220°C for flavor (Injector), 240–300°C for clouds (Diffuser).
Partially: the PID controller must be plugged into a power outlet. However, once the heating element is heated up, you lift it wirelessly from the docking station and place it on the bowl. The actual vaporization process is cable-free – no cord between you and the bowl.
The kit is a complete package: Adaptaball Heater with titanium head, Diffuser and Injector attachments, aluminum docking station, PID controller with power cable, 25mm Axial Coil, Adaptabowl with 14mm/18mm joints, two titanium cups (Large + Microdose), three ball sets, titanium screens, scoop, brush, and hex key. Only a bubbler is not included.
The Adaptaball is geared toward experienced users who already know what they want from a vaporizer. Ball vapes require some experimentation – finding the right combination of ball material, temperature, and attachment. For beginners, we recommend portable devices with simpler controls.
The Adaptaball is developed and produced by Vices in Australia. The company specializes in modular ball vape systems and uses high-quality materials like Grade 2 titanium and zirconia.
Three things: First, modularity – swappable attachments for convection and conduction in the same device. Second, three ball materials included instead of just one. Third, the wireless design – with most ball vapes, the heating element is directly attached to the cable.
The Adaptabowl has 14mm and 18mm glass joints. This means virtually any commercially available bubbler, bong, or water pipe will work. No special Vices glass needed – any standard glass piece with a 14mm or 18mm ground joint will fit.
The Adaptaball itself is completely silent – it has no motor, no fan, and no moving parts. The only sound comes from the airflow through the balls when inhaling and possibly from the bubbler. The PID controller also operates silently.
The PID controller reaches target temperature in about 2 minutes. However, the balls themselves need 8–10 minutes of heat soak to be fully heated through. In Injector mode, you can start with shorter pre-heating; in Diffuser mode, a full heat soak is recommended for best results.
Yes, the Adaptaball comes in a 220V version (Europe, Australia) and a 110V version (USA, Canada). Make sure to order the correct version for your country – the power supply is not switchable.
Yes! The hot 25mm coil also fits standard bangers and slurpers for concentrates. Vices offers various bangers, carb caps, and pearls as accessories. The advantage over a torch: you program the exact temperature on the PID controller – no more guessing.
Yes. Before the very first use, perform a burn-off at 350–400°C for 10–20 minutes to clear factory residue. Repeat this process separately for each of the three ball materials. Only then use it with herbs.
The included materials are all high-quality. Among experienced users, sapphires (not included, sold separately) are considered the best for flavor and heat transfer. Of the three included materials, ruby corundum offers the best balance between flavor and cloud density.
Comments
No comments yet. Be the first!
Sign in to comment