Storz & Bickel Veazy — Inspiring Orange
Storz & Bickel Veazy — Inspiring Orange is a portable dry-herb vaporizer. VapoChecker compares current offers from €222.16 (plus shipping) across 1 shop (as of Oct 15, 2026).Price basis: Item price excluding shipping and coupons
Pros
- Water pipe compatible
- Passthrough charging
- 3000 mAh battery
- Hybrid heating
Cons
- 40-second heat-up time
- No dosing capsules
- Smaller community than market leaders
Storz & Bickel Veazy — Inspiring Orange — Price Comparison (1 shop) 188.68 €–329.00 €
Specifications
| Heating Method | Hybrid |
| Device Type | Portable |
| Brand | Storz & Bickel |
| Power Source | Battery |
| Temperature Range | 40°C - 210°C |
| Heat-up Time | 40 seconds |
| Battery Capacity | 2400 mAh |
| Weight | 134 g |
| Warranty | 2 years |
| App Control | Yes |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Presets |
| Material | Dry Herb |
| Vapor Path | Plastic |
| Battery Type | Internal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | USB-C |
Compatible Accessories
Dosing Capsules
3
Screens & Filters
2
Replacement Parts
1
In the price comparison it is available from 180.
See also: Mighty+ · Venty · Volcano Classic · Veazy Alluring Black
Summary Verdict: Who Is the VEAZY Right For?
The VEAZY is right for you if you want a lightweight device with Storz-&-Bickel technology and prefer to operate it with a single button. It weighs 134 g, heats using a combination of convection and conduction, and offers three temperature levels at the press of a button. Fine-tuned temperature control is available via the S&B Web App.
It is less suitable if you want to vape whilst charging or expect a replaceable battery: the VEAZY offers neither. At around 40 seconds, its heat-up time is slower than the VENTY.
Source: Weight, heating principle, and operation are described on the VEAZY product page by Storz & Bickel.
Technical Specifications According to Storz & Bickel
- Dimensions: 13.4 × 3.5 × 3.7 cm
- Weight: approximately 134 g
- Temperature: 40–210 °C (104–410 °F)
- Heat-up time: around 40 seconds to 180 °C
- Battery: one built-in lithium-ion battery, charging via USB-C
- Power consumption: up to 36 watts
- Filling chamber: ceramic-coated, 1.4 cm³ (approximately 150 mg)
- Airflow: up to 10 liters per minute
- Operating temperature: 5–35 °C ambient
Source: These figures are listed in the technical overview of the VEAZY.
Heating: Convection and Conduction
The VEAZY uses the patented combination of convection and conduction that Storz & Bickel also employs in its larger devices: hot air flows through the filling chamber when you draw, whilst the chamber simultaneously transfers heat to the material.
According to the manufacturer, the base temperature of 180 °C is reached in around 40 seconds. A double vibration and a green light indicate that it is ready. How quickly this happens in any individual case depends, according to S&B, on the charge level, ambient temperature, and the amount of material loaded.
Source: The heating principle and heat-up time are described in the technical overview of the VEAZY.
Single-Button Operation: Base, Booster, Superbooster
One press of the button starts heating to the base temperature, set at 180 °C by default. Once reached, a double-click activates the Booster (+15 °C, i.e. 195 °C), and another double-click activates the Superbooster (a further +15 °C, i.e. 210 °C).
Both boost levels automatically revert to the base temperature after 90 seconds. If you prefer to keep the boost active, you can enable «Permanent Boost» in the Web App. All three levels can also be adjusted to the precise degree there.
Source: The levels, double-click function, and 90-second timer are explained in the article «Temperature Settings».
S&B Web App: Optional, In-Browser
You do not need an app to operate the device. The S&B Web App runs in your smartphone's browser via Web Bluetooth — no installation from an app store required. With it you can set the temperature precisely between 40 and 210 °C, define the base, booster, and superbooster temperatures, and switch between Celsius and Fahrenheit.
You can also toggle vibration and permanent Bluetooth, adjust the LED brightness and charging mode, read out operating hours and firmware version, and install updates. The «Find-My-VEAZY» function makes the device light up in multiple colors and vibrate for ten seconds.
Source: The feature set and connection method are described in the article «S&B Web App & VEAZY».
Reading the LED Indicators
The VEAZY has no display, only two LEDs. During heating they glow orange — steady for the base temperature, slow-blinking for the Booster, fast-blinking for the Superbooster. Green means: temperature reached.
Errors are indicated by combinations with red: red on the bottom and white-blue blinking on the top means «device too hot»; the reverse means «too cold». If both LEDs glow steady white, the device is faulty — switch it off immediately, unplug the cable, and contact support.
Source: All color codes are listed in the article «LED Display Options».
How Do I Charge the Battery Properly?
Charging is via USB-C. Storz & Bickel recommends a charger rated at 5 V / 3 A (15 W). In its comparison table, the manufacturer states that the VEAZY reaches 80 % charge in approximately 40 minutes. The blue LED indicates the level: blinking up to 30 %, fast-blinking up to 60 %, slow-blinking up to 98 %, steady when full.
The blinking pattern also tells you about the charger: yellow indicates a USB-C-to-USB-A cable, magenta indicates a weak charger with which charging will take considerably longer. An ECO charging mode in the Web App helps preserve the battery. According to Storz & Bickel, the VEAZY cannot be used whilst charging.
Source: Charger recommendations, LED levels, and ECO mode are described in the article «Charging».
Automatic Shut-Off
The VEAZY switches itself off if neither the button has been pressed nor a draw taken for a period of time. A brief vibration gives advance warning. A short press of the button resets the timer.
Regarding the duration, Storz & Bickel contradicts itself: the product page and technical overview state two minutes, whilst the article on temperature settings states three minutes. We use the two-minute figure cited consistently by two sources.
Source: The two-minute figure is stated in the technical overview of the VEAZY.
Loading the VEAZY Correctly
- Rotate the cooling unit 90° counter-clockwise and lift it off.
- Fill ground herb into the filling chamber up to the plastic rim — do not overfill and do not pack it down firmly.
- Replace the cooling unit and rotate it 90° clockwise.
The chamber holds 1.4 cm³, approximately 150 mg according to the manufacturer. The process is easier with S&B dosing capsules or the filling aid that Storz & Bickel recommends for this purpose.
Source: The loading steps are described in the article «Operation».
Inhaling Correctly
Unfold the mouthpiece and draw steadily for a few seconds, using no more than half your lung capacity. Hold your breath briefly and exhale slowly. Do not blow into the VEAZY.
Before each use, S&B advises checking the device for damage and inspecting the mouthpiece and cooling unit for residue. The air vents must not be blocked during operation or whilst the device is cooling down.
Source: Usage instructions and safety notes are provided in the article «Operation».
Cleaning the VEAZY: Cooling Unit and Screen
Switch the device off and unplug the cable. Remove the cooling unit and carefully lever the filling chamber screen out of its groove using a pointed pair of tweezers. A blocked or damaged screen must be replaced.
Either soak the parts in warm washing-up water for 5 to 30 minutes, or in isopropyl alcohol for a maximum of 30 minutes. Afterwards, rinse everything under running water for at least one minute and allow it to dry completely. The screen is inserted slightly bowed, with the bow facing upwards, and pressed flat into the groove using the filling chamber tool. Clean the housing and cable only with a dry or damp cloth.
Source: Cleaning and screen replacement are described in the article «Cleaning».
Materials and Cooling
The cooling unit is made from the medical-grade plastics PEEK and PPSU, and the filling chamber has a ceramic coating. According to S&B, all parts you touch are heat-resistant and all parts in the airpath are biocompatible.
In the labyrinthine cooling unit, the vapor cools down across two levels before it reaches the mouthpiece. According to the manufacturer, the device complies with the safety standard UL 8139.
Source: Materials, cooling, and the standard are listed on the VEAZY product page and the technical overview.
Warranty, Reset, and Accessories
The VEAZY comes with a two-year warranty. Unlike the VENTY or MIGHTY+, registering it does not add an extra year of warranty. For any claims, Storz & Bickel requires a valid proof of purchase.
Holding the button for ten seconds resets all temperature levels on the VEAZY to factory settings. Storz & Bickel sells original accessories including cooling units, mouthpieces, a seal ring set, a wear parts set, a USB-C charger, and a case. The device is available in black, orange, blue, and pink.
Source: The warranty terms are stated on the Storz & Bickel warranty page.
VEAZY, VENTY, and CRAFTY+ Compared
Storz & Bickel presents the three portable devices side by side in a table. All cover 40 to 210 °C. The VEAZY weighs 134 g and takes at least 40 seconds to reach 180 °C. The CRAFTY+ is equally light at 135 g, but takes 60 to 80 seconds. The VENTY is the fastest at a minimum of 17 seconds, but weighs 252 g — almost twice as much — and has an adjustable airflow of up to 20 liters per minute.
Those looking primarily for a lightweight device with S&B heating will end up with the VEAZY or CRAFTY+. Currently, the VEAZY starts from 180, the CRAFTY+ from 179, and the VENTY from 295.
Source: The comparison figures are taken from the table on the VEAZY product page by Storz & Bickel.
Official Resources
More Storz & Bickel Vaporizers 4
Alternatives at a similar price 3
Same device type and a similar price; matching heating methods come first. Size and features may differ.
Spec comparison
 Storz & Bickel Veazy Inspiring Orange | ||||
|---|---|---|---|---|
| Price from | 222.16€ · incl. shipping | 233.90€ · Code VAPOCHECKER5 · incl. shipping | 160.67€ · Code VAPOCHECKER5 · incl. shipping | 266.95€ · Code VAPOCHECKER5 · incl. shipping |
| Type | Portable | Portable | Portable | Portable |
| Heating | Hybrid | Hybrid | Hybrid | Hybrid |
| Temperature | 40°C - 210°C | 40°C - 210°C | 40°C - 210°C | 40°C - 210°C |
| Heat-up time | 40s | 60s | 60s | 20s |
| Battery | 2400 mAh | 3300 mAh (conflicting source values) | N/A | N/A |
| Weight | 134 g | 242 g | 135 g | 252 g |
Green = better value
Open in full comparison →From 40 to 210 °C. Using the button you select Base (180 °C by default), Booster (195 °C), and Superbooster (210 °C); precise degree-by-degree adjustment is available via the S&B Web App.
Storz & Bickel states approximately 40 seconds to the base temperature of 180 °C. A double vibration indicates it is ready.
No. The S&B Web App is optional and runs in the browser. Without it, you use the three pre-set levels via the button.
No. Storz & Bickel rules out use whilst charging.
According to Storz & Bickel's comparison table, approximately 40 minutes to 80%. A USB-C power supply of 5 V / 3 A is recommended.
After two minutes without a button press or draw, according to the product page and technical overview. A brief press of the button resets the timer.
The chamber holds 1.4 cm³, approximately 150 mg according to Storz & Bickel. Fill to the plastic rim without packing the herb down.
Yes. Storz & Bickel recommends the S&B dosing capsules or the filling aid for loading.
Soak the cooling unit and screen for 5 to 30 minutes in warm washing-up water or for a maximum of 30 minutes in isopropyl alcohol, rinse for one minute, and allow to dry completely.
Two years. The additional registration year available for the VENTY or MIGHTY+ does not apply to the VEAZY.
Hold the button down for ten seconds. A vibration and green-red-blue light confirm the reset; the temperature levels are then restored to factory settings.
Comments
No comments yet. Be the first!
Sign in to comment