The M7 is entirely stainless steel and practically indestructible. No battery means nothing to age or run flat. A jet flame lighter is all you need. Bong users can fit it directly on 10 mm joints.

The M7 by DynaVap starts at 62€ and heats up in 7 seconds. The PAX Mini by PAX starts at 79€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX Mini price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The HyperDyn is the right pick for those who want a portable device and are comfortable with a 8-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full HyperDyn price comparison

The M7 disassembles without tools: condenser, O-rings, cap, and tip separate by hand. All metal parts can soak in isopropyl alcohol (99%) for 15 minutes. Remove O-rings first — prolonged alcohol exposure makes them brittle.

Day-to-day, push a pipe cleaner through the condenser every three to four sessions. Stubborn residue on the tip comes off with a brief soak. Stainless steel tolerates rough cleaning better than titanium — scratches don't affect performance.

Schedule

The Adjust-A-Bowl is DynaVap's chamber size system. Standard mode holds roughly 0.1 g; with the Adjust-A-Bowl insert, capacity drops to about 0.05 g — perfect for microdosing or potent material.

DynaVap dosing capsules fit directly into the tip and keep the chamber clean. Reloading takes seconds, and capsules help maintain even extraction.

The M7 works equally well with or without capsules. Frequent travelers benefit from pre-filled capsules. For maximum vapor production, load the chamber directly — direct contact between material and tip walls improves conduction extraction.

Butane vaporizers like the M7 need no outlet or battery — a jet flame lighter is enough. Compared to battery devices, there are practical differences:

• Air travel: Jet flame lighters are allowed in carry-on luggage (1 per person, filled). The M7 itself counts as personal smoking accessories.
• Cold weather: Butane works reliably down to about −2 °C. In colder conditions, keep the lighter in an inner pocket.
• Discretion: With no electronics, the M7 produces no LED light or vibration. Only the cap click is audible.

At roughly 45 g and 9.2 cm, the M7 is one of the most compact vaporizers in our price comparison. It fits any shirt pocket.

DynaVap offers a wide range of accessories compatible across all DynaVap models:

• Induction heaters: Ispire Wand, Caldron, or VonG heater — heat the cap in 5–8 seconds without a flame.
• DynaStash: Magnetic transport container for the M7 plus a material compartment.
• WPA (10 mm): The M7 fits 10 mm joints directly. Adapters are available for 14 mm and 18 mm.
• Replacement caps: Swap the Captive Cap for Low-Temp or Adjust-Temp variants.
• Simrell stems: Premium cooling stems (Stinger, MVS) for improved cooling and aesthetics.

The M7 by DynaVap starts at 59€ and heats up in 7 seconds. The Air MAX by Arizer starts at 59€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Air MAX price comparison

The DynaVap M7 and Venty represent opposite philosophies: the M7 runs on butane from €59, the Venty is an app-controlled hybrid device from €285.

The M7 suits users who value simplicity and grid independence. The Venty is for those who want precise temperature control and large sessions. Both produce excellent vapor — the Venty delivers more consistent sessions, the M7 extracts in a few powerful draws.

Both devices target experienced users who appreciate on-demand vapor. The M7 uses butane, the Tinymight 2 runs on a battery with pure convection.

Both are compact and deliver vapor within seconds. The Tinymight 2 offers more flexibility (session and on-demand modes, temperature choice), while the M7 needs no electronics. The Tinymight 2's vapor quality is among the best on the market; the M7 wins on durability and ritual character.

The Mighty+ is Europe's best-selling portable vaporizer — and the exact opposite of the M7: electronic, certified, with USB-C and app control.

The Mighty+ is the better choice for beginners, shared sessions, and medical use. The M7 excels as an ultralight secondary device for travel or for users who deliberately avoid electronics.

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The WoodWynd is the right pick for those who want a portable device and are comfortable with a 7-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full WoodWynd price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The M7 XL is the right pick for those who want a portable device and are comfortable with a 7-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full M7 XL price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The Air SE by Arizer starts at 55€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Air SE price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The ArGo by Arizer starts at 64€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full ArGo price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The The B2 is the right pick for those who want a portable device and are comfortable with a 8-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full The B2 price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The UniDyn is the right pick for those who want a portable device and are comfortable with a 7-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full UniDyn price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The Pivot by Puffco starts at 34€ with a 5-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Pivot price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The G3 is the right pick for those who want a portable device and are comfortable with a 8-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full G3 price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The The B is the right pick for those who want a portable device and are comfortable with a 8-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full The B price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The VonG is the right pick for those who want a portable device and are comfortable with a 7-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full VonG price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The Dash+ by G Pen starts at 50€ with a 20-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Dash+ price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The XMAX V3 Nano by XMAX starts at 42€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XMAX V3 Nano price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The VonG X is the right pick for those who want a portable device and are comfortable with a 7-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full VonG X price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The ARTIQ by DaVinci starts at 45€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full ARTIQ price comparison

The M7 by DynaVap starts at 44€ and heats up in 7 seconds. The Nano by Flowermate starts at 70€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Nano price comparison

The M7 suits users who prefer a portable device and appreciate a heat-up time of just 7 seconds. The M Plus is the right pick for those who want a portable device and are comfortable with a 8-second heat-up time. Both devices come from DynaVap and deliver excellent vapor quality.

See the full M Plus price comparison

A special feature of the VENTY is its continuously adjustable airflow via the dial on the bottom of the device. This allows each user to customize draw resistance to their preference:

The innovative flowmeter in the VENTY measures the negative pressure during inhalation and dynamically adjusts heating power – ensuring optimal vapor production with every draw.

How to Set the Airflow: Practice Over Theory

In practice, the VENTY's vapor output depends not just on temperature, but on the combination of airflow, draw duration, and chamber condition. For consistent sessions, start with a fixed setup and change only one variable at a time. This helps you find your personal sweet spot faster.

Common Airflow Mistakes with the VENTY

• Too low temperature at maximum airflow: often produces thin vapor and unnecessarily long sessions.
• Overpacked chamber: artificially increases draw resistance and reduces convection efficiency.
• Quick, short draws: better to inhale steadily for 4–8 seconds rather than short, hard puffs.
• Neglected cleaning: residue in the cooling unit changes airflow behavior and degrades flavor.

Users switching from the Mighty+ to the VENTY benefit most from the more versatile draw character. This makes the VENTY the better choice for many in varying situations: relaxed at home with medium airflow or on the go with open airflow for quick, strong draws.

The VENTY is equipped with two powerful lithium-ion batteries and supports USB-C Power Delivery for fast charging.

Charging Options:

• Fast charging (recommended): 80% in just 40 minutes with the official STORZ & BICKEL USB-C Supercharger (15V @ 3A). The display shows fast blinking during fast charging.
• Standard charging: Possible with other USB-C chargers, but takes significantly longer. The display shows slow blinking.
• ECO charging mode: Activatable via the Web App – optimizes charging speed and extends battery life through moderated power delivery.

Important note: The VENTY does not support pass-through charging (charging while in use). Since the device requires over 100 watts during operation, this exceeds the maximum power output of USB-C chargers.

When all six status fields on the display are constantly lit, the battery is fully charged. The charger should always be disconnected after charging.

Real-World Battery Life

Storz & Bickel advertises about 20 sessions per charge – in daily use, expect 10 to 14 sessions realistically. Heavy use of Booster or Superbooster mode drains the battery noticeably faster. The battery consists of two 18650 lithium-ion cells with a combined capacity of 5,940 mAh and is not user-replaceable.

From a user perspective, multiple reviews rate the battery as mid-range — particularly at higher temperatures and heavy use. At the same time, the fast USB-C charging is highlighted as a clear advantage.

According to Friendly Aussie Buds (24 June 2025), VENTY availability can vary considerably depending on the country and regulatory framework (in the video specifically referencing Australia).

Real-World Battery Life: Realistic Expectations

Actual battery life depends heavily on temperature, airflow setting, and draw behavior. At moderate settings, more sessions are possible than at constantly high temperatures with open airways and Booster use. The following table provides orientation:

Tips for Better Battery Efficiency

• Don't start at 210 °C unnecessarily: better to increase gradually when needed.
• End sessions deliberately: turn off after target extraction instead of letting it run idle.
• Use ECO charging mode wisely: useful for users who prioritize long-term battery health.
• Use suitable chargers: stable USB-C PD chargers reduce charging times significantly.

Pass-Through and Charging in Practice

The VENTY does not support pass-through charging. This is not a defect but a deliberate design decision due to the high power requirements during operation. For many users, a second charging setup makes sense (e.g. one charger at home and one for travel), so spontaneous sessions don't fail due to a dead battery.

For buyers focused on daily usability, the combination of fast charging, clear remaining capacity display, and stable session performance matters most. These points are highlighted positively in multiple reviews, even though absolute battery life is perceived differently depending on usage style.

Safety Instructions Before First Use:

• Fully charge VENTY with the included USB-C cable
• Check device and power supply for visible damage – do not use damaged devices
• Check airflow: mouthpiece and cooling unit must be free of foreign objects
• Do not block air vents during operation or cooling

Filling the Chamber:

1. Turn cooling unit 90° counter-clockwise and remove
2. Fill ground herbs up to the plastic rim – do not overfill or pack tightly!
3. Replace cooling unit and turn 90° clockwise to secure

Tip: When using dosing capsules, airflow may be slightly restricted.

Using Concentrates

The VENTY does not come with a dedicated concentrate adapter. For waxes or oils, use the Storz & Bickel Liquid Pads (15 mm). Place the pad in the filling chamber to prevent concentrate from seeping into the device. A set costs around €10 and is sold separately. For concentrates, a lower temperature around 180°C works best.

Vaporizing – Step by Step:

1. Turn on device with long button press and wait for green light (~20 seconds)
2. Fold out mouthpiece
3. Inhale steadily for a few seconds – only about half as deep as possible
4. Hold breath for a few seconds
5. Exhale slowly

Important: Never blow into the device! Pay attention to body reactions (coughing, chest discomfort) – consult a doctor if in doubt. Automatic shut-off occurs after 2 minutes of inactivity.

Regular cleaning is essential for optimal vapor quality and longevity of the VENTY. Storz & Bickel recommends cleaning the screens with the included brush after each use.

Before Cleaning:

• Turn off vaporizer and let it cool down
• Disconnect USB-C cable
• Remove filling chamber screen
• Wipe housing only with a dry or slightly damp cloth – never wet!

Method 1: Warm Soapy Water (gentle)

1. Soak cooling unit and all screens in warm soapy water for at least 5 minutes
2. Rinse thoroughly under running water for at least 1 minute
3. Let dry completely before reinserting

Method 2: Isopropyl Alcohol (for stubborn residue)

1. Soak parts in isopropyl alcohol for maximum 30 minutes
2. Rinse thoroughly under running water (at least 1 minute)
3. Let dry completely – no alcohol residue!

Check regularly: Inspect all parts for cracks, discoloration, brittleness, or damage. Replace damaged parts immediately – replacement parts are available from Storz & Bickel.

Wear Parts & Replacement Costs

Screens and sealing rings are the typical wear parts on the VENTY. Depending on usage, they should be replaced every 3 to 6 months. Storz & Bickel offers Wear & Tear Sets for around €30–50 that include all common replacement parts. Original spare parts are available directly from the Storz & Bickel online shop.

The VENTY can optionally be controlled via the STORZ & BICKEL Web App. The app is not required for operation but offers extended features:

• Precise temperature calibration – set custom values for Base, Booster, and Superbooster
• Adjust display brightness (levels 0-9)
• Activate ECO charging mode for longer battery life
• Firmware updates – always the latest software for optimal performance
• Device diagnostics and error analysis
• Device reset to factory settings

Connecting:

1. Enable Bluetooth on your smartphone/tablet
2. Open browser (recommended: Bluefy on iOS, Chrome on Android)
3. Visit app.storz-bickel.com
4. Turn on VENTY
5. Follow the Bluetooth pairing instructions on screen

Tip: Firmware should be updated regularly to ensure best performance and future compatibility.

Firmware Issues & Error Codes

Earlier firmware versions occasionally triggered error codes E04 and E05 – usually related to temperature sensor faults or communication issues. The firmware update to version 1.07 has largely resolved these problems. If you have trouble connecting to the Web App: it relies on the Web Bluetooth API, which is not supported by all browsers. Chrome works most reliably – Safari and Firefox may cause connection drops.

For thorough cleaning or replacement of wear parts, the VENTY can be disassembled. Follow these steps to remove the cooling unit and all screens.

Disassembly:

1. Open mouthpiece: Place the edge of the mouthpiece into the notch on the rotating cap and turn counter-clockwise to open and remove.
2. Remove sealing ring: Pull the sealing ring off the rotating cap at the recess.
3. Remove cooling unit cap: Carefully pull the cooling unit cap off the vaporizer.
4. Remove cooling unit screen: Pull out the screen in the cooling unit.
5. Release adjustment wheel: Use the filling chamber tool to push the adjustment wheel out of the cooling unit. The sealing ring will fall out.
6. Unscrew cooling unit base: Turn the cooling unit base 90° counter-clockwise off the vaporizer.
7. Remove filling chamber screen: Gently push the screen out from above with a cotton swab.
8. Release base sealing ring: Pry out the large base sealing ring with the filling chamber tool at the recess in the slot.

Assembly:

Follow the instructions in reverse order. Note:

• Place the sealing ring directly on the airflow adjustment wheel – the "TOP" label must face up
• Ensure all sealing rings are properly seated and not kinked
• Insert screens into their designated grooves
• Turn cooling unit 90° clockwise to secure

Important: Damaged or deformed sealing rings should be replaced immediately to ensure optimal air-tightness and vapor quality. Replacement parts are available directly from Storz & Bickel.

Included with the VENTY:

• 1× VENTY Vaporizer
• 1× USB-C Cable (USB-C to USB-C)
• 1× Filling Chamber Tool
• 1× Cleaning Brush
• 2× O-Ring Ø 9×1.5 mm (spare)
• 2× Normal Screens, small
• 3× Coarse Screens, small
• 2× Cooling Unit Screens
• 1× Quick Start Guide

Note: A charger is not included. For optimal fast charging, the official STORZ & BICKEL USB-C Supercharger is recommended as optional accessory.

See the full Tinymight 2 price comparison

See the full Frolic price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Crafty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Crafty+ price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Mighty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty+ price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Volcano Hybrid is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Hybrid price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Volcano Classic is the right pick for those who want a desktop unit and are comfortable with a 300-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Classic price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Plenty is the right pick for those who want a desktop unit and are comfortable with a 270-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Plenty price comparison

The Venty by Storz & Bickel starts at 285€ and heats up in 20 seconds. The Tinymight 2 by Tinymight starts at 271€ with a 3-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Tinymight 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Air MAX by Arizer starts at 0€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Air MAX price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX Mini by PAX starts at 0€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX Mini price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX Flow by PAX starts at 0€ with a 35-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full PAX Flow price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX Plus by PAX starts at 0€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Solo 2 MAX by Arizer starts at 0€ with a 30-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Solo 2 MAX price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The V3 Pro by XMAX starts at 0€ with a 15-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full V3 Pro price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The G3 by DynaVap starts at 30€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full G3 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XS GO by AirVape starts at 0€ with a 20-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full XS GO price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Solo 2 by Arizer starts at 0€ with a 30-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Solo 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Elite II by G Pen starts at 0€ with a 20-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Elite II price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Starry 4 by XMAX starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Starry 4 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Plus by Puffco starts at 0€ with a 12-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Firefly 2+ by Firefly starts at 10€ with a 3-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Firefly 2+ price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XLux Roffu by XLux starts at 0€ with a 20-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XLux Roffu price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Mighty is the right pick for those who want a portable device and are comfortable with a 90-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The M Plus by DynaVap starts at 30€ with a 8-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full M Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XVape Aria by XMAX starts at 0€ with a 15-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XVape Aria price comparison