Storz & Bickel Venty: Replace Screens & O-Rings
Pros
- 20-second heat-up time – extremely fast
- Hybrid heating (convection + conduction)
- App control for temperature curves
- Water pipe compatible with excellent vapor output
Cons
- Non-replaceable battery
- No pass-through charging
- 252g relatively heavy for a portable
Replace Screens & O-Rings for the Venty. You can find the complete overview on the main page.
Replace Screens & O-Rings
Replace Screens & O-Rings is a core practical topic for the Venty. Build a stable baseline with fixed temperature and airflow, adjust one variable per session, and keep short notes to find a reproducible setup.
Check draw rhythm, chamber fill, and cleaning intervals in a regular routine. Most quality gains come from consistency, not from extreme settings.
- Start with one repeatable profile.
- Change only one parameter at a time.
- Track taste, vapor density, and session duration.
- Clean cooling path, screens, and seals regularly.
Direct comparisons
More Venty topics
- Cleaning & Care
- Battery Charging Tips
- Temperature Settings
- Airflow Settings
- Herb Prep & Grind
- Dosing Capsule Guide
- Troubleshooting & Error Messages
- How to Use — Getting Started
- Venty vs Mighty+
- Venty vs Tinymight 2
- Venty vs Crafty+
- Venty vs Fenix Neo
- Venty vs Dynavap
- Venty vs Volcano Hybrid
- Venty Alternatives
- Medical Use: Notes
- Microdosing
- Evening Relax Profiles
- Avoid Beginner Mistakes
- Best Dosing Capsules
- Clean & Replace Cooling Unit
- Mouthpiece Comparison
- Frequently Asked Questions (FAQ)
- Review & Long-Term Test
Venty Guides & Niches
- Cleaning & Care
- Battery Charging Tips
- Temperature Settings
- Airflow Settings
- Herb Prep & Grind
- Dosing Capsule Guide
- Troubleshooting & Error Messages
- How to Use — Getting Started
- Venty vs Mighty+
- Venty vs Tinymight 2
- Venty vs Crafty+
- Venty vs Fenix Neo
- Venty vs Dynavap
- Venty vs Volcano Hybrid
- Venty Alternatives
- Medical Use: Notes
- Microdosing
- Evening Relax Profiles
- Avoid Beginner Mistakes
- Best Dosing Capsules
- Clean & Replace Cooling Unit
- Mouthpiece Comparison
- Replace Screens & O-Rings
- Frequently Asked Questions (FAQ)
- Review & Long-Term Test
The VENTY heats up to the set temperature in just <strong>20 seconds</strong> – three times faster than its predecessor, the Mighty+. A green light and double vibration indicate that the device is ready to use.
The VENTY offers a temperature range of <strong>40°C to 210°C</strong> (104°F to 410°F) in 1-degree increments. The default base temperature is 180°C, but it can be adjusted as desired.
With two powerful lithium-ion batteries, the VENTY provides several sessions per charge depending on temperature and usage. With the USB-C Supercharger, the battery charges to <strong>80% in just 40 minutes</strong>.
<strong>No</strong>, the VENTY does not support pass-through charging. As it requires over 100 watts during operation, this exceeds the power output of any USB-C charger.
<strong>Yes!</strong> The VENTY is fully compatible with the original Storz & Bickel dosing capsules, which are also used with the Mighty+, Crafty+, Volcano Hybrid and Plenty.
The <strong>booster</strong> increases the temperature by +15°C above the base temperature. The <strong>superbooster</strong> increases it by +30°C for maximum extraction. Both modes switch off automatically after 90 seconds.
The cooling unit and screens can be soaked in warm washing-up water (at least 5 minutes) or isopropyl alcohol (maximum 30 minutes). Then rinse thoroughly and allow to dry completely. The screens should be cleaned with the brush after every use.
<strong>No</strong>, the STORZ & BICKEL Web App is optional. The VENTY works fully without the app. However, the app offers additional features such as precise temperature calibration, firmware updates and ECO charging mode.
The VENTY is the more modern successor, with: a <strong>3× faster heat-up time</strong> (20s vs. 60s), <strong>USB-C</strong> instead of a proprietary charging connection, <strong>adjustable airflow</strong>, a more compact design and dynamic heating adjustment through the integrated flowmeter.
Storz & Bickel provides a <strong>3-year manufacturer warranty</strong> for the VENTY. Registration is completed via the official website or the Web App.
Yes! The VENTY has a <strong>continuously adjustable airflow dial</strong> on the underside. From 1 notch (low resistance, ~3 l/min) to 3 notches (open draw, 20 l/min), every user can set their preferred draw resistance.
For the first few sessions, the medium setting is usually sensible: enough air for comfortable draws, but still sufficient resistance for controlled inhalation. Start at around 185 °C, then adjust airflow or temperature gradually.
High airflow alone is not enough. If the temperature is too low, the chamber is packed too tightly or the draws are too short, extraction will remain weak. Steady 5-8 second draws, a loose fill and a temperature range of around 190-200 °C often help.
This depends on local laws and approval rules. In some markets (e.g. according to Friendly Aussie Buds in Australia, as of 24 June 2025), regulatory requirements may restrict sales of individual models.
Start with moderate temperatures (e.g. 185-195 °C), use the booster only when needed and consistently switch off the device after the session. This significantly reduces consumption without substantially reducing vapour quality.
Like all Storz & Bickel products, the VENTY is developed and manufactured <strong>in Germany</strong> – in Tuttlingen, Germany's medical-technology capital. All materials in the airflow path are biocompatible and heat-resistant.
For disassembly: insert the mouthpiece into the notch and turn it <strong>anticlockwise</strong>, remove the cooling-unit cap, pull out the screens and release the dial with the filling-chamber tool. During reassembly, pay attention to the <strong>"TOP" label</strong> on the dial and fit all sealing rings correctly.
Comments
No comments yet. Be the first!
Sign in to comment