Wiz Hybrid

The Wiz Hybrid uses a hybrid heating system. The chamber pre-heats via conduction, while drawing pulls hot air (convection) through the material. Result: fast heat-up like conduction, but more even extraction like convection.

At 225 °C maximum, the Wiz Hybrid covers the standard range fully. Low temps (170-190 °C) deliver flavorful, light vapor. Higher temps (200-225 °C) produce denser clouds with stronger effects.

Heat-up takes 25 seconds. Comparable to pure conduction devices but with better flavor from the hybrid system.

The key feature: a replaceable 2200 mAh battery. While most portables have sealed batteries, the Wiz Hybrid lets you swap batteries in seconds.

Practical benefits: A spare battery extends runtime without waiting for a charge. When the battery degrades after 300-500 cycles, just replace it instead of the whole device. This extends the product lifespan significantly.

The 2200 mAh battery provides 6-10 sessions per charge. A duration for a complete charge is not documented. With a spare, you have effectively unlimited runtime.

The Wiz Hybrid is water pipe compatible. A WPA adapter fits standard 14mm joints. Hybrid vapor through water combines the best of both worlds.

Water filtration cools and smooths the vapor. The difference is noticeable at temperatures above 200 °C. Density stays, heat and irritation drop.

Without a water pipe, the built-in mouthpiece works well. The vapor path is designed to deliver comfortably tempered vapor even without water cooling.

The Wiz Hybrid sits comfortably in hand with its ergonomic design. The housing is built for daily transport. Chamber size fits 0.15-0.25 g -- enough for 5-8 draws per load.

Cleaning is straightforward: brush the chamber after each session. Every 10-15 sessions, soak the mouthpiece and screens in isopropyl alcohol. Hybrid heating produces less residue than pure conduction.

Please check the selected offer for the exact contents of the box. WPA adapter depending on set.