The Tinymight 2 uses a stainless steel convection heater with an exceptionally large surface area. Unlike most portable vaporizers, the Tinymight works with pure convection: air is drawn through the heating element during inhalation and then passes through the material.

Benefits of pure convection:

• Better flavor: The large heating surface means lower surface temperatures are needed, resulting in purer taste
• No residual heating: In on-demand mode, heating stops immediately when the button is released
• Even extraction: Hot air flows evenly through the material

The heating element is a spiral-shaped metal structure. Different production runs have used various configurations – some placed inside a glass tube, others inside a metal tube, and some as a free-standing structure with ceramic support rods.

Note: The heater produces a faint noise during operation. This is normal and results from current pulses acting on the lightweight, large-surface heating structure.

The Tinymight 2 uses a replaceable 18650 lithium-ion battery. One Molicel battery is included in the package.

Compatible batteries:

The Tinymight 2 is very powerful and requires high-drain cells. Only the following Molicel models are recommended:

• Molicel P30B (3,000 mAh)
• Molicel P28A (2,800 mAh)
• Molicel P26A (2,600 mAh)

Warning: Other 18650 batteries may provide insufficient performance or pose a safety risk. Only use original batteries or Molicel cells from trusted sources.

Charging:

Charging is done via USB with a cable and an adapter capable of at least 2A output. A full charge from 0 to 90% takes approximately 1.5 hours. The aluminum bottom panel gets warm during charging – this is normal as it acts as a heatsink.

Charging only starts when the battery voltage has dropped sufficiently. If charging doesn't begin, the battery is still too full for a new charging cycle.

The Tinymight 2 offers two operating modes, selectable when turning on the device:

On-Demand Mode:

In on-demand mode, the vaporizer heats only while the button is held down. Upon release, the device returns to standby immediately. Heat-up time is approximately 3 seconds.

• Perfect for single draws between tasks
• No material consumption during standby
• Maximum control over extraction

Session Mode:

In session mode, the vaporizer heats up automatically and maintains a stable temperature until turned off.

• Ideal for longer sessions
• Constant temperature without holding the button
• Easy to pass around in a group

Micro-dosing: The Tinymight 2 works excellently for micro-dosing. The adjustable chamber volume works well with very small amounts as well as larger loads.

Regular cleaning is important for vapor quality and longevity of the Tinymight 2. The parts that need cleaning are the glass tube with cooling unit and occasionally the stainless steel mesh screen above the heater.

Glass tube & cooling unit:

1. Unscrew the threaded ring on the front panel – the internal parts slide out easily
2. Rinse the glass tube and cooling unit with hot water and detergent
3. Alternatively, soak in isopropyl alcohol for stubborn residue
4. Rinse thoroughly and allow to dry completely

Stainless steel mesh screen:

The mesh screen above the heater protects the heating element. If dirty, it can be gently cleaned with the included brush.

Important: The mesh screen must always sit securely in its holder. If it falls onto the heater, it can cause a short circuit that damages the heater. Do not use third-party dosing capsules that could displace the screen.

The Tinymight 2 is handcrafted in Helsinki, Finland. Each unit is individually assembled and assigned a unique serial number.

Materials in the vapor path:

• Stainless steel – heating element and vapor channel
• Quartz glass – glass lining and vapor tube

The entire vapor path uses no glues, chemicals, or insulation materials. The only materials in the device are oak wood, stainless steel, glass, and aluminum. The electronics board is separated from the vapor path.

Counterfeit detection:

Counterfeits exist on the market. Original units from February 2022 onwards have a serial number on the bottom panel and an individually registered security code. In fake TM2 units, the battery is often inserted the opposite way – the original has "+" printed on the inside of the battery lid.

Reduced vapor production:

1. Check the battery: A weak or old battery can reduce performance. Only use recommended Molicel cells.
2. Clean battery lid contact: Occasionally scratch the contact point on the battery lid to ensure optimal power transfer.
3. Adjust calibration: The temperature range can be adjusted in steps from -3 to +3. At +3, setting 7 delivers the results of setting 10.

Cracked glass lining:

The internal glass lining can crack if the unit is dropped. Replacement glass linings are available from the Tinymight shop. Replacement requires a Torx T20 screwdriver. Warning: The internal screw must be loosened before removing the top panel – otherwise the device will be destroyed.

Cooling unit slides out of glass tube:

The cooling unit requires two different o-rings: one 10mm and one 11mm ring. If both are the same size, the fit will be too loose or too tight.

Over 90 official accessories and spare parts are available for the Tinymight 2. Compare prices from 11 European shops in our Tinymight price comparison. The full range is also available directly from the Tinymight EU Shop.

Glass Tubes & Stems:

Mouthpieces:

• Glass Mouthpiece for Ball Stems – fits Long and Short Ball Stem
• Colored Mouthpieces (Pink, Smokey) – glass, for individual style

Dosing Capsules:

• Dosing Capsule v2 – stainless steel, for clean and quick loading
• Dosing Capsule v2 TITANIUM – lighter and more durable
• 5-pack with holder – practical for on-the-go use (stainless steel or titanium)

Water Pipe Adapters:

• 14mm glass adapter – for 14mm water pipes
• 18mm glass adapter – for 18mm water pipes
• 3-in-1 adapter – compatible with various sizes
• Portable Bubbler – compact water filter for on the go

Spare Parts:

• Glass Lining – replacement for cracked linings after drops
• Screen Holder – holds the heater protection screen
• Mesh Screen – protects the heater element
• Tube Holder Threaded Ring – secures the glass tube
• O-rings – sets for cooling unit, ball stems, top panel and multitool

Other Accessories:

• Cooling Unit – most important wear part
• Stir Tool / Multitool – for stirring and emptying the chamber
• Extra Battery + Charger – for unlimited runtime on the go
• USB-C Quick Charger (EU plug) – for fast charging
• Beeswax Jar – for wood surface maintenance
• Bag of Balls – replacement glass balls for ball stems

The Tinymight 2 package includes:

• 1× Tinymight 2 Vaporizer (oak wood body)
• 1× Molicel 18650 battery
• 1× Glass tube with cooling unit
• 1× USB charging cable
• 1× Cleaning brush
• 1× Spare o-rings
• 1× Quick start guide

Note: Additional glass tubes, replacement glass linings, and extra Molicel batteries are available as optional accessories directly from Tinymight.

Full comparison: Our Frolic vs. Tinymight 2 article breaks down vapor quality, battery life, cleaning, and daily usability of both devices in detail.

The Tinymight 2 by Tinymight starts at 271€ and heats up in 3 seconds. The Venty by Storz & Bickel starts at 285€ with a 20-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Venty price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The Air MAX by Arizer starts at 59€ with a 60-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Air MAX price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The PAX Mini by PAX starts at 79€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX Mini price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The M7 by DynaVap starts at 44€ with a 7-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full M7 price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The M7 XL by DynaVap starts at 84€ with a 7-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full M7 XL price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The Air SE by Arizer starts at 55€ with a 60-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Air SE price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The ArGo by Arizer starts at 64€ with a 60-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full ArGo price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The The B2 by DynaVap starts at 50€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full The B2 price comparison

The Tinymight 2 by Tinymight starts at 59€ and heats up in 3 seconds. The Pivot by Puffco starts at 34€ with a 5-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Pivot price comparison

• Tinymight Official Website
• Tinymight 2 User Manual (PDF)
• Tinymight FAQ (Manufacturer)
• Warranty Registration & Conditions
• Official Tinymight Retailers
• Tinymight EU Shop – Accessories & Spare Parts

A special feature of the VENTY is its continuously adjustable airflow via the dial on the bottom of the device. This allows each user to customize draw resistance to their preference:

The innovative flowmeter in the VENTY measures the negative pressure during inhalation and dynamically adjusts heating power – ensuring optimal vapor production with every draw.

How to Set the Airflow: Practice Over Theory

In practice, the VENTY's vapor output depends not just on temperature, but on the combination of airflow, draw duration, and chamber condition. For consistent sessions, start with a fixed setup and change only one variable at a time. This helps you find your personal sweet spot faster.

Common Airflow Mistakes with the VENTY

• Too low temperature at maximum airflow: often produces thin vapor and unnecessarily long sessions.
• Overpacked chamber: artificially increases draw resistance and reduces convection efficiency.
• Quick, short draws: better to inhale steadily for 4–8 seconds rather than short, hard puffs.
• Neglected cleaning: residue in the cooling unit changes airflow behavior and degrades flavor.

Users switching from the Mighty+ to the VENTY benefit most from the more versatile draw character. This makes the VENTY the better choice for many in varying situations: relaxed at home with medium airflow or on the go with open airflow for quick, strong draws.

The VENTY is equipped with two powerful lithium-ion batteries and supports USB-C Power Delivery for fast charging.

Charging Options:

• Fast charging (recommended): 80% in just 40 minutes with the official STORZ & BICKEL USB-C Supercharger (15V @ 3A). The display shows fast blinking during fast charging.
• Standard charging: Possible with other USB-C chargers, but takes significantly longer. The display shows slow blinking.
• ECO charging mode: Activatable via the Web App – optimizes charging speed and extends battery life through moderated power delivery.

Important note: The VENTY does not support pass-through charging (charging while in use). Since the device requires over 100 watts during operation, this exceeds the maximum power output of USB-C chargers.

When all six status fields on the display are constantly lit, the battery is fully charged. The charger should always be disconnected after charging.

Real-World Battery Life

Storz & Bickel advertises about 20 sessions per charge – in daily use, expect 10 to 14 sessions realistically. Heavy use of Booster or Superbooster mode drains the battery noticeably faster. The battery consists of two 18650 lithium-ion cells with a combined capacity of 5,940 mAh and is not user-replaceable.

From a user perspective, multiple reviews rate the battery as mid-range — particularly at higher temperatures and heavy use. At the same time, the fast USB-C charging is highlighted as a clear advantage.

According to Friendly Aussie Buds (24 June 2025), VENTY availability can vary considerably depending on the country and regulatory framework (in the video specifically referencing Australia).

Real-World Battery Life: Realistic Expectations

Actual battery life depends heavily on temperature, airflow setting, and draw behavior. At moderate settings, more sessions are possible than at constantly high temperatures with open airways and Booster use. The following table provides orientation:

Tips for Better Battery Efficiency

• Don't start at 210 °C unnecessarily: better to increase gradually when needed.
• End sessions deliberately: turn off after target extraction instead of letting it run idle.
• Use ECO charging mode wisely: useful for users who prioritize long-term battery health.
• Use suitable chargers: stable USB-C PD chargers reduce charging times significantly.

Pass-Through and Charging in Practice

The VENTY does not support pass-through charging. This is not a defect but a deliberate design decision due to the high power requirements during operation. For many users, a second charging setup makes sense (e.g. one charger at home and one for travel), so spontaneous sessions don't fail due to a dead battery.

For buyers focused on daily usability, the combination of fast charging, clear remaining capacity display, and stable session performance matters most. These points are highlighted positively in multiple reviews, even though absolute battery life is perceived differently depending on usage style.

Safety Instructions Before First Use:

• Fully charge VENTY with the included USB-C cable
• Check device and power supply for visible damage – do not use damaged devices
• Check airflow: mouthpiece and cooling unit must be free of foreign objects
• Do not block air vents during operation or cooling

Filling the Chamber:

1. Turn cooling unit 90° counter-clockwise and remove
2. Fill ground herbs up to the plastic rim – do not overfill or pack tightly!
3. Replace cooling unit and turn 90° clockwise to secure

Tip: When using dosing capsules, airflow may be slightly restricted.

Using Concentrates

The VENTY does not come with a dedicated concentrate adapter. For waxes or oils, use the Storz & Bickel Liquid Pads (15 mm). Place the pad in the filling chamber to prevent concentrate from seeping into the device. A set costs around €10 and is sold separately. For concentrates, a lower temperature around 180°C works best.

Vaporizing – Step by Step:

1. Turn on device with long button press and wait for green light (~20 seconds)
2. Fold out mouthpiece
3. Inhale steadily for a few seconds – only about half as deep as possible
4. Hold breath for a few seconds
5. Exhale slowly

Important: Never blow into the device! Pay attention to body reactions (coughing, chest discomfort) – consult a doctor if in doubt. Automatic shut-off occurs after 2 minutes of inactivity.

Regular cleaning is essential for optimal vapor quality and longevity of the VENTY. Storz & Bickel recommends cleaning the screens with the included brush after each use.

Before Cleaning:

• Turn off vaporizer and let it cool down
• Disconnect USB-C cable
• Remove filling chamber screen
• Wipe housing only with a dry or slightly damp cloth – never wet!

Method 1: Warm Soapy Water (gentle)

1. Soak cooling unit and all screens in warm soapy water for at least 5 minutes
2. Rinse thoroughly under running water for at least 1 minute
3. Let dry completely before reinserting

Method 2: Isopropyl Alcohol (for stubborn residue)

1. Soak parts in isopropyl alcohol for maximum 30 minutes
2. Rinse thoroughly under running water (at least 1 minute)
3. Let dry completely – no alcohol residue!

Check regularly: Inspect all parts for cracks, discoloration, brittleness, or damage. Replace damaged parts immediately – replacement parts are available from Storz & Bickel.

Wear Parts & Replacement Costs

Screens and sealing rings are the typical wear parts on the VENTY. Depending on usage, they should be replaced every 3 to 6 months. Storz & Bickel offers Wear & Tear Sets for around €30–50 that include all common replacement parts. Original spare parts are available directly from the Storz & Bickel online shop.

The VENTY can optionally be controlled via the STORZ & BICKEL Web App. The app is not required for operation but offers extended features:

• Precise temperature calibration – set custom values for Base, Booster, and Superbooster
• Adjust display brightness (levels 0-9)
• Activate ECO charging mode for longer battery life
• Firmware updates – always the latest software for optimal performance
• Device diagnostics and error analysis
• Device reset to factory settings

Connecting:

1. Enable Bluetooth on your smartphone/tablet
2. Open browser (recommended: Bluefy on iOS, Chrome on Android)
3. Visit app.storz-bickel.com
4. Turn on VENTY
5. Follow the Bluetooth pairing instructions on screen

Tip: Firmware should be updated regularly to ensure best performance and future compatibility.

Firmware Issues & Error Codes

Earlier firmware versions occasionally triggered error codes E04 and E05 – usually related to temperature sensor faults or communication issues. The firmware update to version 1.07 has largely resolved these problems. If you have trouble connecting to the Web App: it relies on the Web Bluetooth API, which is not supported by all browsers. Chrome works most reliably – Safari and Firefox may cause connection drops.

For thorough cleaning or replacement of wear parts, the VENTY can be disassembled. Follow these steps to remove the cooling unit and all screens.

Disassembly:

1. Open mouthpiece: Place the edge of the mouthpiece into the notch on the rotating cap and turn counter-clockwise to open and remove.
2. Remove sealing ring: Pull the sealing ring off the rotating cap at the recess.
3. Remove cooling unit cap: Carefully pull the cooling unit cap off the vaporizer.
4. Remove cooling unit screen: Pull out the screen in the cooling unit.
5. Release adjustment wheel: Use the filling chamber tool to push the adjustment wheel out of the cooling unit. The sealing ring will fall out.
6. Unscrew cooling unit base: Turn the cooling unit base 90° counter-clockwise off the vaporizer.
7. Remove filling chamber screen: Gently push the screen out from above with a cotton swab.
8. Release base sealing ring: Pry out the large base sealing ring with the filling chamber tool at the recess in the slot.

Assembly:

Follow the instructions in reverse order. Note:

• Place the sealing ring directly on the airflow adjustment wheel – the "TOP" label must face up
• Ensure all sealing rings are properly seated and not kinked
• Insert screens into their designated grooves
• Turn cooling unit 90° clockwise to secure

Important: Damaged or deformed sealing rings should be replaced immediately to ensure optimal air-tightness and vapor quality. Replacement parts are available directly from Storz & Bickel.

Included with the VENTY:

• 1× VENTY Vaporizer
• 1× USB-C Cable (USB-C to USB-C)
• 1× Filling Chamber Tool
• 1× Cleaning Brush
• 2× O-Ring Ø 9×1.5 mm (spare)
• 2× Normal Screens, small
• 3× Coarse Screens, small
• 2× Cooling Unit Screens
• 1× Quick Start Guide

Note: A charger is not included. For optimal fast charging, the official STORZ & BICKEL USB-C Supercharger is recommended as optional accessory.

See the full Tinymight 2 price comparison

See the full Frolic price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Crafty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Crafty+ price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Mighty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty+ price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Volcano Hybrid is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Hybrid price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Volcano Classic is the right pick for those who want a desktop unit and are comfortable with a 300-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Classic price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Plenty is the right pick for those who want a desktop unit and are comfortable with a 270-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Plenty price comparison

The Venty by Storz & Bickel starts at 285€ and heats up in 20 seconds. The Tinymight 2 by Tinymight starts at 271€ with a 3-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Tinymight 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Air MAX by Arizer starts at 0€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Air MAX price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX Mini by PAX starts at 0€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX Mini price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX Flow by PAX starts at 0€ with a 35-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full PAX Flow price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX Plus by PAX starts at 0€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Solo 2 MAX by Arizer starts at 0€ with a 30-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Solo 2 MAX price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The V3 Pro by XMAX starts at 0€ with a 15-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full V3 Pro price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The G3 by DynaVap starts at 30€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full G3 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XS GO by AirVape starts at 0€ with a 20-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full XS GO price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Solo 2 by Arizer starts at 0€ with a 30-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Solo 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Elite II by G Pen starts at 0€ with a 20-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Elite II price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Starry 4 by XMAX starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Starry 4 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Plus by Puffco starts at 0€ with a 12-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Firefly 2+ by Firefly starts at 10€ with a 3-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Firefly 2+ price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XLux Roffu by XLux starts at 0€ with a 20-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XLux Roffu price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Mighty is the right pick for those who want a portable device and are comfortable with a 90-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The M Plus by DynaVap starts at 30€ with a 8-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full M Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XVape Aria by XMAX starts at 0€ with a 15-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XVape Aria price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX 3 by PAX starts at 0€ with a 22-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX 3 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Fog Pro by XMAX starts at 0€ with a 15-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Fog Pro price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Fenix Mini+ by Fenix starts at 16€ with a 25-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Fenix Mini+ price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The CFX Plus by Boundless starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full CFX Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The CFC 2.0 by Boundless starts at 30€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full CFC 2.0 price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Volcano Medic 2 is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Medic 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Zeus Ion by Zeus starts at 22€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Zeus Ion price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XVape Avant by XMAX starts at 0€ with a 15-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XVape Avant price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Hit by Yocan starts at 25€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Hit price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The IQ2 by DaVinci starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full IQ2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Orbit by Yocan starts at 26€ with a 10-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Orbit price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The LITL Sneaky by LITL starts at 23€ with a 25-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full LITL Sneaky price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The XVape Lanza by XMAX starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full XVape Lanza price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Solo by Arizer starts at 20€ with a 120-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Solo price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Uni Pro by Yocan starts at 16€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Uni Pro price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Evolve Plus XL by Yocan starts at 16€ with a 5-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Evolve Plus XL price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan iCan by Yocan starts at 25€ with a 10-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan iCan price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Ziva Pro by Yocan starts at 11€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Ziva Pro price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The PAX 2 by PAX starts at 0€ with a 45-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full PAX 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Nestor by Yocan starts at 16€ with a 10-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Nestor price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Vane by Yocan starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Vane price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Cylo by Yocan starts at 24€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Cylo price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Uni 3.0 by Yocan starts at 17€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Uni 3.0 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Ziva by Yocan starts at 7€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Ziva price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Kodo by Yocan starts at 6€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Kodo price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The LITL 1 by LITL starts at 25€ with a 45-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full LITL 1 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The CCELL Sandwave by CCELL starts at 8€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full CCELL Sandwave price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Crafty is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Crafty price comparison

The Venty suits users who prefer a portable device and appreciate a heat-up time of just 20 seconds. The Mighty+ Medic is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty+ Medic price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The CCELL Rizo by CCELL starts at 14€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full CCELL Rizo price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Lookah Guitar by Lookah starts at 17€ with a 5-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Lookah Guitar price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Lookah Snail 2.0 by Lookah starts at 13€ with a 5-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Lookah Snail 2.0 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Dubb by Yocan starts at 21€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Dubb price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Vane 2 by Yocan starts at 0€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Vane 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Linx Hermes 3 by Linx starts at 21€ with a 3-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Linx Hermes 3 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The V5 Pro by Flowermate starts at 10€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full V5 Pro price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Dr. Dabber Light by Dr. Dabber starts at 17€ with a 5-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Dr. Dabber Light price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Yocan Kodo Plus by Yocan starts at 7€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Yocan Kodo Plus price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The Air 2 by Arizer starts at 0€ with a 75-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Air 2 price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The LITL Bit by LITL starts at 16€ with a 25-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full LITL Bit price comparison

The Venty by Storz & Bickel starts at 1€ and heats up in 20 seconds. The CCELL Palm by CCELL starts at 16€ with a 2-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full CCELL Palm price comparison