The Volcano Hybrid covers a temperature range of 40 to 230 degrees Celsius (104 to 446 degrees Fahrenheit). The heater operates at 270 watts and uses a hybrid system of convection and conduction.

Heating process:

After turning on the heater, it takes up to two minutes to reach the set temperature, depending on the setting. Typical heat-up time is around 40 seconds at standard temperatures. The pump briefly turns on to signal acoustically that the set temperature has been reached – this signal can be disabled via the app.

Temperature during vaporization:

Temperature is measured at the heat exchanger, not directly in the filling chamber. The display shows reference values for the attached filling chamber with the pump running. A temperature increase should always be a last resort, as higher temperatures can affect the taste.

Auto shut-off: Factory set to 30 minutes. Individually adjustable via the Storz & Bickel app. The display dims to 30 percent in standby mode (adjustable down to 10 percent via the app).

The Volcano Hybrid comes with three EASY VALVE Balloons with mouthpiece plus one EASY VALVE Balloon with adapter. The balloon method is the hallmark of the Volcano series.

Step by step:

1. Grind plant material using the included herb mill
2. Unscrew the filling chamber cap, fill material up to the lower edge of the hopper
3. Screw the cap back on, place the filling chamber on the hot air generator and turn clockwise until it stops
4. Turn on the heater (HEAT) and set the desired temperature
5. When actual and set temperature match: stretch the valve balloon tight, place it vertically on the filling chamber
6. Turn on the pump (AIR) – the balloon fills with vapor
7. Turn off the pump, remove the balloon with the filling chamber, set the filling chamber aside
8. Insert the mouthpiece into the valve, press lips lightly against it, and inhale slowly

Tip: Only fill the balloon with as much vapor as you intend to use within the next 10 minutes. Vapor condenses on the balloon jacket after a few hours. Do not blow into the balloon.

In addition to the valve balloon, the Volcano Hybrid includes a tube kit (1 meter tube with tube flexer and mouthpiece). This allows direct inhalation without the detour of a balloon.

Usage:

1. Turn off the pump (the tube is used without the pump)
2. Place the tube with tube flexer on the preheated, filled filling chamber
3. Inhale slowly from the tube with mouthpiece for several seconds

The tube should be replaced every two weeks for hygienic reasons. It should only be used by one person at a time. The tube flexer and mouthpiece can be cleaned together with the filling chamber parts.

Airflow: The tube allows up to 30 liters per minute of airflow – powered entirely by lung draw, without the pump. With the valve balloon, there is virtually no draw resistance since the pump actively pushes vapor into the balloon.

Breathing technique: Only inhale about half of what you could. Hold the air in the lungs for a few seconds and exhale slowly.

The filling chamber, filling chamber cap, and tube kit can be disassembled and cleaned in seconds. The screens should be cleaned with the included cleaning brush after each use.

Disassembling the filling chamber cap:

1. Pull off the cap ring
2. Push the upper screen out downwards using the cleaning brush handle
3. Push the cap cylinder out downwards

Disassembling the filling chamber:

Push the filling chamber cylinder upwards out of the filling chamber housing.

Cleaning methods:

• Soapy water: Clean screens and cap ring with warm soapy water. All other parts are dishwasher safe.
• Isopropyl alcohol: Soak all parts for a maximum of 30 minutes, then rinse for at least one minute under running water. Do not soak plastic parts longer than 30 minutes to avoid discoloration or embrittlement.

Hot air generator: Clean only with a dry or damp cloth. Never immerse in water. The air filter on the bottom should be checked for contamination every four weeks and replaced as needed.

Wear Parts & Replacement Costs

The Volcano Hybrid has three main consumable categories:

• Easy Valve Bags (set of 3, ~€20) — replace every 50 to 100 sessions. Visible discoloration or noticeable flavor loss is the cue.
• Normal screens (set of 6, ~€6) — every 3 to 6 months or when draw resistance increases.
• Tube set (~€15) — replace every two weeks or when discolored.

Seals and filling chamber parts are also sold individually. The air filter (underside) should be checked every 4 weeks and replaced as needed (2 included). Original parts are available from the Storz & Bickel shop or authorized retailers.

Wear Parts & Replacement Costs

The Volcano Hybrid requires several replacement parts over time: The EASY VALVE balloon set (3 balloons + mouthpiece) costs around €25 and should be replaced every 2 weeks with heavy use. A tube replacement set (1 m tube + mouthpiece) runs about €12, also to be swapped every 2 weeks. Normal screens (6-pack) cost about €6 and last 3–6 months. The air filter set (2 pieces) at about €5 should be checked every 4–8 weeks. The filling chamber seal ring costs about €5 and is replaced as needed. A complete Wear & Tear Set with all consumables is available for around €35. Original parts can be found at the Storz & Bickel online shop or authorized retailers.

The Volcano Hybrid is compatible with Storz & Bickel dosing capsules. These small aluminum capsules allow you to pre-fill and store portioned plant material in the capsule magazine.

Benefits of dosing capsules:

• Faster change of vaporization material
• Cleaner operation – the filling chamber stays virtually residue-free
• Pre-portioned for convenience (stored in the magazine)

Dosing capsules are filled using the included filling set with the funnel magazine lid. They are designed as single-use items and should be disposed of after use.

Scope of delivery:

• 1 hot air generator
• 3 EASY VALVE balloons with mouthpiece
• 1 EASY VALVE balloon with adapter and mouthpiece
• 1 balloon fixation ring
• 1 filling chamber with cap ring
• 1 tube kit (1 m tube, tube flexer, mouthpiece)
• 6 normal screens
• 2 air filters
• 1 cleaning brush
• 1 herb mill
• 1 power cord
• 1 instructions for use

Using Concentrates

For waxes and oils, Storz & Bickel offers Liquid Pads (15 mm diameter). The stainless-steel mesh disc goes inside the filling chamber on top of plant material or on its own, with concentrate spread on it. This prevents anything from dripping into the hot air generator.

Recommended concentrate temperature for the Volcano Hybrid is 170–190 °C — lower than for portable devices since the desktop heater delivers more power and the vapor path is shorter. A set of 8 Liquid Pads costs around €10 and also fits inside dosing capsules together with a Concentrate Pad.

Concentrates & Drip Pads

For waxes and oils, the Volcano Hybrid uses Drip Pads (also called Liquid Pads). The pad is placed on top of the herb in the filling chamber or used on its own together with the filling chamber reducer. A set of 4 Drip Pads costs around €10. The recommended temperature for concentrates is 170–200°C – desktop devices like the Volcano work more efficiently here than portables, so lower temperatures are sufficient. The pads also fit inside dosing capsules with a Concentrate Pad. After use, clean the pad with isopropyl alcohol.

The Volcano Hybrid connects via Bluetooth to the Storz & Bickel web app on your smartphone. The app is not required for operation but offers additional settings.

App features:

• Temperature control – read and set temperature directly from your phone
• Celsius/Fahrenheit toggle
• Auto shut-off – customize the shut-off timer (factory setting: 30 min.)
• LCD brightness – adjust standby dimming from 30 to 10 percent
• Acoustic signal – enable/disable the beep when set temperature is reached
• Booster temperature – set a temperature boost above the setpoint
• Vibration alarm – enable/disable vibration notification on the device
• Smartphone vibration – phone notification when target temperature is reached
• Firmware updates – update device software through the app

To connect: activate Bluetooth on the Volcano Hybrid (display lights up), open the Storz & Bickel web app at storz-bickel.com/app/web, and select the device.

Browser Compatibility

The Storz & Bickel Web App relies on the Web Bluetooth API. Chrome (desktop and Android) works most reliably. Safari and Firefox have limited or no Web Bluetooth support — connection drops are possible there.

On iOS, Safari lacks native Web Bluetooth support. The app Bluefy (available in the App Store) serves as a workaround, providing a Web Bluetooth-capable browser. If you experience connection issues, toggle Bluetooth on the Volcano off and on again (hold Temperature Minus + AIR for 3 seconds).

Browser Compatibility & Error Codes

The Storz & Bickel Web App uses the Web Bluetooth API. Chrome (desktop and Android) works most reliably. Safari and Firefox either lack Web Bluetooth support or have limited compatibility – connection drops may occur. On iOS, Safari has no native Web Bluetooth support. As a workaround, the Bluefy app (available in the App Store) provides a Web-Bluetooth-capable browser. Firmware updates can also be performed through the Web App.

The Volcano Hybrid has two error codes: ERR + r (resettable) can be resolved by holding the HEAT button for 10 seconds – this resets the device to factory settings. ERR + n (non-resettable) means the device must be sent to a Storz & Bickel Service Center. Typical causes include temperature sensor faults or electronics communication issues.

Technical specifications:

Common issues:

• No vapor: Compare set and actual temperature (at least 180 degrees Celsius). Filling chamber and balloon correctly attached? Fresh material?
• Balloon does not fill: Pump turned on? Filling chamber correctly mounted?
• Plant particles in balloon: Clean the screen in the cap or check if it is correctly seated.
• ERR display with number + r: Perform a factory reset (press HEAT for 10 seconds).
• ERR display with number + n: Irreversible error – send the device to the Service Center.

Warranty:

Two-year limited warranty from date of purchase. Register at storz-bickel.com/registration within 4 weeks of purchase for an additional year of warranty (3 years total). The warranty covers defects in materials and workmanship under normal use, but not accessories such as balloons, tubes, screens, or dosing capsules.

Storz & Bickel offers three stationary vaporizers with different strengths. The following comparison shows the key differences at a glance.

* Heat-up time depends on ambient temperature, device and fill quantity. Fill capacity may vary depending on material and grind.

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Volcano Classic is the right pick for those who want a desktop unit and are comfortable with a 300-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Classic price comparison

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Venty is the right pick for those who want a portable device and are comfortable with a 20-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Venty price comparison

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Crafty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Crafty+ price comparison

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Mighty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty+ price comparison

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Plenty is the right pick for those who want a desktop unit and are comfortable with a 270-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Plenty price comparison

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Mighty is the right pick for those who want a portable device and are comfortable with a 90-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty price comparison

The Volcano Hybrid suits users who prefer a desktop unit and appreciate a heat-up time of just 40 seconds. The Volcano Medic 2 is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Medic 2 price comparison

• Storz & Bickel Official Website
• Volcano Hybrid Instructions for Use (PDF)
• Volcano Hybrid Quick Start Guide (PDF)
• Storz & Bickel Web App
• Product Registration & Warranty
• Storz & Bickel Service Center

The Mighty+ uses PEEK (polyether ether ketone) for its housing. PEEK comes from medical and aerospace industries: food-safe, heat-resistant, and far tougher than standard plastic. Where other vaporizers crack after a drop, a PEEK housing survives.

The filling chamber holds 1.4 cm³ and has a ceramic coating for wear resistance and easy cleaning — a damp cotton swab after every third session does the job. The cooling unit sits on top and uses a labyrinth airflow path that brings vapor to a comfortable temperature before it reaches the mouthpiece.

Storz & Bickel manufactures the Mighty+ entirely in Germany and certifies it under UL 8139 and IEC 60335-1 — safety standards rarely seen in the vaporizer industry.

The Mighty+ features an LC display showing current and target temperature simultaneously. Two soft-touch buttons (+/-) adjust temperature in 1-degree steps across a 40–210 °C range. The display reads well even in direct sunlight.

Compared to the VENTY (OLED display, Bluetooth app), the Mighty+ offers leaner app connectivity. Via Bluetooth it connects to the S&B Web App, where you can fine-tune the temperature and install firmware updates. That said, the device works perfectly without any app: two buttons on the display, pick your temperature, wait for the vibration — done.

A vibration alert signals when target temperature is reached. After one minute of inactivity, the Mighty+ shuts off automatically — saving battery and preventing overheating.

App & Firmware Updates

The S&B Web App runs directly in the browser — no app store download needed. After Bluetooth pairing, it shows real-time device temperature and allows precise adjustments. Firmware updates are offered automatically when available and install with one click.

Browser tip: Chrome (desktop and Android) works most reliably since the app uses the Web Bluetooth API. Safari and Firefox have limited or no Web Bluetooth support. On iOS, Bluefy (available in the App Store) provides a Web Bluetooth-capable browser as a workaround.

The Mighty+ houses two lithium-ion batteries totaling 3,300 mAh. In practice, expect 6 to 8 full sessions per charge, depending on temperature and draw behavior. That is less than the VENTY (5,940 mAh) but covers a full day for most users.

Charging runs through USB-C. With the Supercharger (15V / 3A, sold separately), the Mighty+ reaches 80 percent in roughly 40 minutes. Standard USB-C chargers work too, just slower. Passthrough charging is supported — vape while connected to the Supercharger.

At 242 grams and 8.0 × 14.0 × 3.0 cm, the Mighty+ is not a pocket device, but it fits a jacket pocket or small backpack. The weight gives it a premium feel that cheaper vaporizers lack.

The battery is not user-replaceable. Storz & Bickel offers battery replacement as a paid service.

Concentrates with the Mighty+

For waxes and oils, Storz & Bickel offers Liquid Pads – small stainless-steel mesh discs placed inside the filling chamber. The concentrate goes on top of the pad so nothing seeps into the device. A set of 8 costs around €10. The pads also fit inside dosing capsules together with a Concentrate Pad. Recommended temperature for concentrates: 190–210°C.

Battery Life in Practice

Storz & Bickel officially quotes around 90 minutes of use. In daily practice, that translates to 6 to 8 sessions at 180–190 °C. Heavy booster use or sessions above 200 °C bring the count closer to 5 or 6. For comparison, the VENTY with its 5,940 mAh battery lasts notably longer, though it weighs only 120 g less.

The two lithium-ion cells (3,300 mAh total) are permanently installed. When capacity drops after 2–3 years, Storz & Bickel offers paid battery replacement as a service — send the device in and expect it back within about two weeks.

The Mighty+ fully supports dosing capsules. These small stainless steel capsules are pre-filled and inserted as needed — practical on the go and keeps the chamber clean. An 8-capsule magazine is available as an accessory.

Other accessories: Wear & Tear Set (seals, screens, cooling unit parts), Mighty+ Case (hard shell), USB-C Supercharger, and the 14 mm water pipe adapter for bong sessions.

Cleaning

The cooling unit comes off without tools and soaks in isopropyl alcohol. Brush the chamber after each session. Every two to three weeks, Storz & Bickel recommends a thorough clean: disassemble the cooling unit, swap screens, wipe the chamber with a damp swab. The entire process takes under five minutes.

Tip: Collect used dosing capsules and batch-clean them in isopropyl alcohol — saves time and solvent.

Wear Parts & Replacement Costs

Storz & Bickel offers a Wear & Tear Set for around €30. It includes cooling unit parts, seals, screens, and a cleaning brush. Individual parts are also available: replacement screens (normal set, 6 pieces) for about €6, a complete cooling unit for about €18. Screens should be replaced every 3 to 6 months, the cooling unit as needed. Original parts are available from the Storz & Bickel online shop or authorized retailers.

The Mighty+ package includes:

• 1× Mighty+ vaporizer
• 1× USB-C charging cable
• 1× filling chamber tool with cleaning brush
• 3× normal screens + 3× coarse screens
• 1× quick start guide

The Supercharger (fast charger) is not included and must be purchased separately for around €40. Dosing capsules are also sold separately – the 40-capsule magazine with filling aid costs about €30.

All three devices are made by Storz & Bickel and share the same heating system. The Mighty+ offers the best overall package with an OLED display and powerful battery. The table below highlights the key differences at a glance.

Detail pages: Crafty+ Review | VENTY Review

The Mighty+ suits users who prefer a portable device and appreciate a heat-up time of just 60 seconds. The Venty is the right pick for those who want a portable device and are comfortable with a 20-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Venty price comparison

The Mighty+ suits users who prefer a portable device and appreciate a heat-up time of just 60 seconds. The Crafty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Crafty+ price comparison

The Mighty+ suits users who prefer a portable device and appreciate a heat-up time of just 60 seconds. The Volcano Hybrid is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Hybrid price comparison

The Mighty+ suits users who prefer a portable device and appreciate a heat-up time of just 60 seconds. The Volcano Classic is the right pick for those who want a desktop unit and are comfortable with a 300-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Volcano Classic price comparison

The Mighty+ suits users who prefer a portable device and appreciate a heat-up time of just 60 seconds. The Plenty is the right pick for those who want a desktop unit and are comfortable with a 270-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Plenty price comparison

The Mighty+ suits users who prefer a portable device and appreciate a heat-up time of just 60 seconds. The Mighty is the right pick for those who want a portable device and are comfortable with a 90-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.

See the full Mighty price comparison

• STORZ & BICKEL Support – MIGHTY+
• STORZ & BICKEL – Cleaning Guide
• MIGHTY+ Parts & Accessories
• Warranty Registration (+1 Year)