Storz & Bickel Mighty+

The Mighty Plus price comparison on VapoChecker shows you prices updated daily from ??ber 30 authorised retailers. The Mighty Plus (Mighty+) is currently available from 269 ??? ??? Verdampftnochmal, Vapowelt, Herbalize Store and other German shops offer it at the same entry price. The price history shows whether now is a good time to buy.

Storz & Bickel sets the RRP of the Mighty Plus at 299 ???. In the price comparison, the g??nstigste price at German shops is regelm????ig around 10???15 % lower. International retailers such as Herbalize Store ES and La Centrale Vapeur also offer it at the same lowest German price. Set a price alert to be notified immediately when the Mighty Plus drops below your target price.

At the heart of the Mighty+ is Storz & Bickel’s patented heating system, which combines convection and conduction. The chamber is heated from the outside (conduction) while hot air simultaneously flows through the material (convection). This combination ensures even extraction from the very first draw.

Compared with pure convection vaporizers like the Tinymight 2, the Mighty+ heats up a little more slowly (~60 seconds at 180 °C), but vapour production remains constant throughout the entire session. Airflow is 10 litres per minute — enough for deep draws without noticeable resistance.

Booster & Superbooster

Double-clicking the power button activates the Booster, which raises the temperature by 15 °C. This allows the remaining material to be extracted efficiently towards the end of a session without permanently changing the base temperature. Storz & Bickel calls the maximum setting “Superbooster" — a useful feature that other manufacturers do not offer in this form.

The Mighty+ uses PEEK (polyether ether ketone) as its housing material. PEEK is known from medical engineering and aerospace: food-safe, heat-resistant and significantly tougher than conventional plastic. When dropped on a hard floor, a PEEK housing survives where other vaporizers crack.

The filling chamber holds 1.4 cm³ and has a ceramic coating. This makes it hard-wearing and easy to clean — a damp cotton bud after every third session is enough. The cooling unit sits on top and uses a labyrinth-style air path that cools the vapour to a comfortable temperature before it reaches the mouthpiece.

Storz & Bickel manufactures the Mighty+ entirely in Germany and has the device certified to UL 8139 and IEC 60335-1 — safety standards that are rare in the vaporizer industry.

The Mighty+ features an LCD display that shows the current and target temperatures at the same time. Using two soft-touch buttons (+/-), you can set the temperature in 1-degree steps between 40 °C and 210 °C. The display is easy to read even in sunlight.

Compared with the VENTY (OLED display, Bluetooth app), the Mighty+ offers a leaner app connection. Via Bluetooth, it connects to the S&B Web App, where the temperature can be set with 1-degree precision and firmware updates can be installed. However, operation also works entirely without the app: two buttons on the display, choose the temperature, wait until the device vibrates — done.

A vibration alert lets you know when the target temperature has been reached. After one minute of inactivity, the Mighty+ switches off automatically — a safety feature that saves battery and prevents overheating.

App & Firmware Updates

The S&B Web App runs directly in the browser — no App Store download required. After Bluetooth pairing, it shows the current device temperature in real time and allows precise adjustments. Firmware updates are offered automatically when needed and can be installed with one click.

Browser tip: Chrome (desktop and Android) works most reliably because the app uses the Web Bluetooth API. Safari and Firefox do not support Web Bluetooth, or only support it with limitations. On iOS, the Bluefy app (in the App Store) is a workaround that provides a Web-Bluetooth-capable browser.

The Mighty+ contains two lithium-ion batteries with a combined capacity of 3,300 mAh. In practice, that is enough for 6 to 8 full sessions, depending on temperature and draw style. That is less than the VENTY (5,940 mAh), but for most users it is enough for a day.

Charging is via USB-C. With the Supercharger (15V / 3A, sold separately), the Mighty+ reaches 80 percent in around 40 minutes. Standard USB-C power adapters also work, but charge more slowly. Passthrough Charging is possible — so the Mighty+ can be used while charging, provided the Supercharger is connected.

At 242 grams and measuring 8,0 × 14,0 × 3,0 cm, the Mighty+ is not a pocket device, but it fits in a jacket pocket or a small rucksack. At the same time, the weight gives it a premium feel that cheaper vaporizers often lack.

The battery is not user-replaceable. Storz & Bickel offers a battery replacement service.

Concentrates in the Mighty+

For waxes and oils, Storz & Bickel offers Liquid Pads – small stainless steel mesh discs placed in the filling chamber. The concentrate is placed on the pad so that nothing runs into the device. A pack of 8 costs around 10 €. The pads also fit into the dosing capsules together with a Concentrate Pad. Recommended temperature for concentrates: 190–210 °C.

Battery life in practice

Storz & Bickel officially states around 90 minutes of use. In everyday use, that equates to 6 to 8 sessions at 180–190 °C. If you use the booster frequently or vape at 200 °C+, expect more like 5 to 6 sessions. By comparison, the VENTY manages significantly more sessions with its 5.940-mAh battery, though it also weighs only 120 g less.

The two lithium-ion cells (3,300 mAh combined) are built in. When capacity drops after 2–3 years, Storz & Bickel offers a paid battery replacement service — the device is sent in and usually returned within two weeks.

The Mighty+ is fully compatible with dosing capsules (Dosing Capsules). These small stainless steel capsules are pre-filled and inserted when needed — practical for on the go and for keeping the chamber clean. A dosing capsule magazine (8 capsules) is available as an accessory.

Other accessories: Wear & Tear Set (seals, screens, cooling unit parts), Mighty+ Case (hard shell), USB-C Supercharger and the 14-mm water pipe adapter for bong sessions.

Cleaning

The cooling unit can be removed without tools and soaked in isopropanol. The chamber is brushed out after every session using the supplied brush. Every two to three weeks, Storz & Bickel recommends a thorough clean: disassemble the cooling unit, replace the screens, wipe the chamber with a damp cotton bud. The whole process takes under five minutes.

Tip: collect used dosing capsules and clean them together in isopropanol — it saves time and alcohol.

Wear parts & replacement costs

Storz & Bickel offers a Wear & Tear Set for around 30 €. It includes cooling unit parts, seals, screens and a cleaning brush. Individual parts are also available: replacement screens (normal set, 6 pieces) for approx. 6 €, and a complete cooling unit for approx. 18 €. Screens should be replaced every 3 to 6 months, and the cooling unit as needed. Genuine parts are available in the Storz & Bickel online shop or from specialist retailers.

The box of the Mighty+ contains:

• 1× Mighty+ vaporizer
• 1× USB-C charging cable
• 1× chamber tool with cleaning brush
• 3× normal screens + 3× coarse screens
• 1× short instruction manual

The Supercharger (fast charger) is not included and must be purchased separately for around 40 €. Dosing capsules are also not part of the standard package – the 40-piece magazine with filling aid costs approx. 30 €.

Regular cleaning keeps the Mighty+ in top condition and ensures pure flavour. After every session, brush out the chamber and remove loose residue. Once a week, clean the mouthpiece and vapour path with isopropyl alcohol (min. 90%).

Cleaning intervals

Avoid typical mistakes

• No water in the chamber — only isopropyl or dry cleaning
• Do not use sharp metal objects in the vapour path
• Replace screens in good time if draw resistance increases

The right temperature on the Mighty+ determines flavour, vapour density and compound profile. Lower temperatures (170–185 °C) emphasise terpenes and deliver mild, aromatic vapour. Higher temperatures (195–210 °C) produce denser clouds and stronger effects.

Temperature zones at a glance

Practical tips

• Start at 180 °C and increase in 5-degree steps
• A finer grind often requires a temperature 5–10 °C lower
• In cold surroundings, raise the starting temperature by 5 °C

The battery of the Mighty+ lasts for several sessions under typical use. For maximum lifespan, keep the battery between 20% and 80% and avoid deep discharge. USB-C charging with a high-quality power adapter speeds up the charging process.

Battery tips

• Do not leave it permanently on charge — unplug after 100%
• If using a replaceable battery: use original or recommended cells
• Battery performance drops in the cold — let it warm up before the session
• Pass-through charging (if supported) allows use while charging

Both are from Storz & Bickel and use the same hybrid heating system (210°C). The Mighty+ has a larger display and more battery capacity. The Crafty+ is more compact and around 30 EUR cheaper, but needs the app for full control.

• STORZ & BICKEL Support – MIGHTY+
• STORZ & BICKEL – Cleaning Guide
• MIGHTY+ Parts & Accessories
• Warranty Registration (+1 Year)