1/6

Arizer Solo 3 V2

Name: Arizer Solo 3 V2
Brand: Arizer
Availability: InStock

Arizer

Best Price

118,64

€

Available at 20 shops

My Alerts

Get notified for free when the price drops

Pros

5000-mAh battery lasts longer than competing models
Lifetime warranty, replaceable battery
15-second heat-up time for quick use
Water pipe compatible with app control

Cons

210g weight is heavier in the portable segment
50–220°C range requires temperature management
Hybrid heating not optimal for large quantities

Last updated: 17/04/2026, 4:39 AM

* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.

🔔

Set a Price Alert Get notified when the price drops.

Buy Arizer Solo 3 V2 at the best price

The Arizer Solo 3 V2 is currently available from €118,64 at 20 shops. The cheapest offer is at DankGeek.

Prices range by €289,18 — comparing is worth it.

Tip: Set a price alert and wait for the right moment.

Go to Best Deal →

The Solo 3 V2 by Arizer is a portable hybrid vaporizer. Temperature range spans 50 to 220 degrees Celsius with a 15-second heat-up time. The battery offers 5000 mAh capacity. Currently from 118.64 EUR across 20 shops (as of Apr 17, 2026).

Last updated: 17/04/2026, 4:39 AM

Specifications

Specifications
Heating Method	Hybrid
Device Type	Portable
Brand	Arizer
Power Source	Battery
Temperature Range	50°C - 220°C
Heat-up Time	15 seconds
Battery Capacity	5000 mAh
Weight	185 g
Dimensions	4.6 x 3.5 x 11.5 cm
Auto Shutoff	20 min
Warranty	99 years
App Control	Yes
Water Pipe	View water pipe adapters
Session Mode	Session & On-Demand
Temperature Control	Digital
Material	Dry Herb
Vapor Path	Glass
Battery Type	18650 Li-Ion
Battery Count	2
Replaceable Battery	Yes
Passthrough Charging	Yes
Charging Port	usb-c

Source: OfficialOfficial, OfficialOfficial, MagicVaporizersAggregator · Verified 20.02.2026

About this vaporizer

The Arizer Solo 3 V2 combines convection and conduction heating with a 5000 mAh battery for extended sessions. Heats up in 15 seconds through a pure glass airpath. USB-C charging with pass-through support. From the Canadian manufacturer known for medical-grade build quality.

Pros

5000-mAh battery lasts longer than competing models
Lifetime warranty, replaceable battery
15-second heat-up time for quick use
Water pipe compatible with app control

Cons

210g weight is heavier in the portable segment
50–220°C range requires temperature management
Hybrid heating not optimal for large quantities

Read our full review →

Key Facts — Arizer Solo 3 V2 Portable · Heating: Hybrid · Heat-up: 15s · Battery: 5000 mAh · Weight: 185g · From: €119 · Shops: 20

The Arizer Solo 3 V2 is the biggest news from Canada in five years. Arizer launched the glass stem era with the Solo model in 2013 and has been shaping the market ever since. Now the third generation brings a revolution: dual-mode operation. Session mode for relaxed 10-minute sessions or on-demand for spontaneous single hits. An 80/20 hybrid heating system (convection/conduction) combined with four glass stems included, including two XL stems with double capacity. The color display is brighter than its predecessor and even rotates when you flip the Solo 3 upside down for water pipe use. With a 5,000 mAh replaceable battery, you'll get over 10 sessions per charge. Temperature control in 1-degree increments between 50-220°C. The Solo 3 is available from ~179€ in 38 shops – check out the price comparison.

See also: XQ2 · Air MAX · ArGo · Extreme Q

How Do I Use My Vaporizer?

The Arizer Solo 3 V2 uses glass aroma tubes instead of a traditional chamber. The borosilicate glass gives you pure flavor with no plastic or metal in the vapor path. Its 5000 mAh battery is the largest in its class – enough for 15–20 sessions per charge.

1. First Charge

Plug in the USB-C cable. The 5000 mAh battery needs about 2.5–3 hours for a full charge. You can vape while it charges (passthrough charging). The OLED display shows battery level as a percentage.

2. Load the Glass Tube

Grind your herbs medium-fine. Hold the glass tube vertically and gently press the open end into the ground material. About 0.1–0.15 g is plenty. The glass tube doubles as both mouthpiece and chamber – so you're loading from the top. Don't pack it: air needs to flow through the herbs.

3. Insert the Tube and Choose Your Temperature

Slide the loaded glass tube into the heating well. Turn the device on (hold button for 3 seconds). The OLED display shows the current temperature. Set your target with the arrow buttons (50–220 °C / 122–428 °F in 1 °C steps):

180 °C / 356 °F – pure flavor, light vapor
195 °C / 383 °F – balanced, flavor plus solid clouds
210 °C / 410 °F – thick clouds, less flavor
220 °C / 428 °F – max extraction

Heat-up takes about 30 seconds. The ArGo app gives you temperature curves and custom presets.

4. Draw Technique

Draw directly from the glass tube – slowly and steadily for 10–15 seconds. The glass naturally cools the vapor on its way to you. A session runs for 12 minutes before auto-shutoff. You can adjust session length in the settings.

5. After Your Session

Power off the device and let it cool briefly. Carefully pull out the glass tube and tap out the spent herbs. A quick blow through the tube clears any remaining bits. Soak the glass tube in isopropyl alcohol every 5–10 sessions – this keeps the flavor pure and the glass clear.

5 Common Beginner Mistakes

Packing the tube too tight – Completely blocks airflow. A gentle press into ground herbs is enough.
Not inserting the tube deep enough – A loose fit means poor heat transfer. Push it firmly all the way in.
Starting too hot – 220 °C on your first draw tastes harsh. Begin at 180–195 °C.
Drawing too fast – With the Solo 3 V2, slow pulls produce way more vapor than quick sips.
Skipping glass tube cleaning – Resin darkens the glass and changes the taste. Clean every 5–10 sessions.

Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95% of target compounds while largely avoiding combustion by-products. Source: PubMed 16637053

Session Mode in Detail

Session mode is your default operation for relaxed vaping sessions. After powering on, you only need 15 seconds until the target temperature is reached. The default session lasts 10 minutes, but you can set it between 5 and 20 minutes. Additionally, there are three customizable presets that you can access with a double-click – perfect for different herbs or times of day. Temperature regulation happens in real-time and adapts to your draw behavior. When you pull hard, the Solo 3 detects the increased airflow and heats more to maintain the temperature. A clever strategy is temperature stepping: Start at 185°C for flavor, bump up to 193°C after a few draws for balance, and finish the session at 205°C for maximum extraction. With an XL stem at 193°C, you get 4-6 fantastic draws with thick vapor and full flavor. After that, the taste begins to decline, even though vapor still comes. The AVB (Already Vaped Bud) comes out brown and crispy – a sign of excellent extraction without green spots. Session mode is ideal for group sessions or when you want to sit back and vape continuously.

On-Demand Mode in Detail

On-demand mode is the big innovation in the Solo 3 and distinguishes it from the Solo 2. Here you start each inhalation separately – like a mini session. The display shows a progress bar and beeps when the temperature is reached. Then you have a 10-second draw window (adjustable between 5-25 seconds). After the draw, the device immediately cools down and preserves your material. The genius part: You can take one draw, put the device away, and come back an hour later – the herb is preserved, not overcooked like in session mode. There are five heat levels that are not customizable but fixed at 180°C, 185°C, 193°C, 205°C, and 220°C. Per XL stem, you get 2-5 powerful draws, depending on the heat level. On-demand mode also allows intense single-hit extractions: Set it to maximum temperature and 25-second draw duration, then you can extract a complete load in a single, long draw. This is especially interesting for water pipe use. The control is precise – no accidental overheating like with butane vaporizers. On-demand mode makes the Solo 3 a versatile device that adapts to your consumption rhythm.

XL Glass Stems – Double Capacity

The Solo 3 package includes four glass stems: two straight (90mm regular + XL) and two water pipe adapters (regular + XL, with frosted tips). The XL stems are the highlight because they hold double the amount of herb – about 0.2g instead of 0.1g. That means more flavor, thicker draws, and stronger effects per session. The XL stems make particular sense on the Solo 3 because the heating chamber is deeper than on the Solo 2 or Air MAX. On the Solo 2, the herb in XL stems sat too close to the seal where there's no heat – on the Solo 3, it sits optimally in the heating zone. Loading works best directly from the grinder: Turn the stem in the herb to fill it. From a jar: Dip the stem in and turn. Then lightly tamp with your finger, make a half turn, and the herb should stay just below the lip – not too tight, or airflow suffers. The glass stems cool the vapor considerably. Heat is generated at the bottom of the stem (which is why the herb browns there first), and by the time the vapor reaches the top, it's pleasantly cool. The WPA stems have a frosted tip for better grip on the water pipe glass. Important: Empty the stems immediately after the session, or the AVB sticks to the glass. A brush for the glass holes keeps everything clean.

Display & Operation

The color display is an upgrade over the Solo 2. It's brighter, sharper, and has more color levels. The brightness setting ranges from 1 to 5, and even at full brightness, battery consumption is minimal. Operation is via three buttons: Power, left, right. To unlock the device, hold Power for three seconds, then press left-up-right in that sequence. On the mode selection screen, you choose Session or On-Demand. Double-clicking a button recalls the three customizable presets. Holding the right button takes you to the settings menu: draw duration (5-25s), Celsius/Fahrenheit, notifications, brightness, display inversion, and auto-shutoff (5-20 minutes). Display inversion is a clever feature: When you flip the Solo 3 upside down for water pipe use (stem facing down), the device detects the orientation and automatically rotates the display. Button functions also rotate – what was previously "left" is now "right". This makes operation intuitive regardless of position. The UI is overall well thought out and after a few sessions, you know where everything is.

Heating & Vapor Quality

The Solo 3 uses an 80% convection / 20% conduction hybrid heating system. Conduction keeps the glass warm, but actual extraction happens through convective heat when drawing. This balance is ideal: The glass is preheated, but the herb doesn't char between draws like with pure conduction. Real-time temperature regulation is based on airflow: If you pull hard, the device heats more to maintain temperature. If you pull gently, it holds naturally. The AVB comes out brown and crispy – a sign of complete extraction. No green spots, no wasted cannabinoids. Heat comes from the bottom of the stem, which is why the bottom of the herb browns first. The sweet spot is at 193°C (380°F). Below that, the AVB stays only brown; above that, the bottom turns blackish. At 193°C, you get maximum flavor, thick clouds, and clean AVB. The glass stems cool the vapor considerably – by the time it reaches your lips, it's pleasant. The first 4-6 draws in session mode are outstanding in flavor, after which intensity decreases even though vapor still comes. Slow draws ("sip don't rip") is the best technique.

Water Pipe Use

The Solo 3 comes with two water pipe adapters (WPA): regular and XL, both with frosted glass tips for better grip. The WPAs fit any 14mm bubbler. When you flip the Solo 3 upside down (stem facing down into the water pipe), the device detects the inversion and automatically rotates the display. Button functions also rotate, so "left" becomes "right" and vice versa – very well thought out. For water pipe use, on-demand mode is recommended. Set it to high temperature (205-220°C) and long draw duration (20-25s), then you can take intense, thick draws. The water additionally filters the vapor, so even high temperatures remain pleasant. You can even extract a complete load in a single draw if you pull for 25 seconds at maximum level. The XL WPA stems are particularly powerful here because they hold double the amount of herb. That means more material for your bubbler session. A tip: After reaching temperature, let the device sit for 10-20 seconds before drawing – this ensures a thicker first hit. The combination of Solo 3 and water pipe is a match made in heaven: precise temperature control, strong extraction, smooth vapor.

How Long Does the Battery Last?

The Solo 3 V2 has a 5,000 mAh replaceable battery – one of the largest on the market. Per charge, you'll get about 10 sessions, which is top-tier and comparable to the Venty. The battery is replaceable, so you can double runtime with a spare battery. This is ideal for festivals, hikes, or long days on the go. Charging is via USB-C Power Delivery, which is faster than regular USB. Passthrough charging is supported, meaning you can vape while the device is plugged in. A full charge takes about 2-3 hours. The display shows battery status in percentage, so you always know where you stand. Compared to other portables, the runtime is excellent. Devices like the Pax Plus only manage 6-7 sessions; the Solo 3 significantly exceeds that. The combination of large battery, efficient heating, and replaceable battery makes the Solo 3 one of the most reliable portable vaporizers. A spare battery costs about 30-40€ and is a worthwhile investment if you're often on the go.

What Are the Technical Specifications?

Specification	Solo 3 V2
Type	Portable Hybrid
Heating	80% Convection / 20% Conduction
Temperature Range	50-220°C (1°C increments)
Heatup Time	5-15 seconds
Modes	Session (5-20 min) + On-Demand
Battery	5,000 mAh (replaceable)
Runtime	~10 sessions per charge
Charging	USB-C Power Delivery, passthrough
Display	Color, rotatable (invertible)
Stems in kit	4 (2x 90mm straight, 2x WPA, each regular + XL)
Water pipe	Yes (14mm WPA stems)
Dosing capsules	Compatible
Weight	210g
Dimensions	4.6 x 3.5 x 11.5 cm
Finish	Shiny brushed metal
Warranty	2 years (Arizer standard)
Price	from ~179€ (38 shops)

Tips for the Solo 3

1. Draw slowly: "Sip don't rip" is the motto. Slow, steady draws give the convection time to extract the herb. Fast, hard pulls can't maintain temperature. 2. Inhale during heatup: As soon as you start "Heat", you can already pull lightly. Terpenes vaporize at low temperatures first – you'll get an intense flavor draw before the target temperature is reached. 3. Wait 10-20 seconds: When the target temperature is reached, wait briefly before taking the first draw. The herb and glass need a moment to absorb the heat evenly. The first draw will be thicker. 4. Empty stems immediately: After the session, tap out the AVB from the stem while it's still warm. When it cools, it sticks to the glass and is harder to remove. 5. Brush the glass holes: A small brush (often included) cleans the screen holes in the stem. This keeps airflow optimal. 6. Don't overload: The herb should stay just below the lip of the stem. If it touches the heating element, it will stick and airflow suffers. 7. Temperature stepping: Start at 185°C, bump to 193°C after a few draws, and finish at 205°C. This way you get everything from your material. 8. XL stems for intensity: If you want thick draws and strong effects, use the XL stems. They hold double the amount and deliver correspondingly more vapor.

How Do I Clean and Maintain My Vaporizer?

Regular cleaning keeps the Solo 3 V2 performing at its best and ensures pure flavor. Brush out the chamber after every session to remove loose residue. Clean the mouthpiece and vapor path weekly with isopropyl alcohol (90% or higher).

Cleaning Schedule

Component	Frequency	Method
Chamber	After each session	Brush, tap out
Mouthpiece	Weekly	ISO soak (15 min)
Vapor path/screen	Every 2 weeks	ISO soak, rinse
Exterior	As needed	Damp cloth

Common Mistakes to Avoid

Never use water inside the chamber — only isopropyl or dry cleaning
Do not use sharp metal tools in the vapor path
Replace screens when draw resistance increases

What Are the Ideal Temperature Settings?

Choosing the right temperature on the Solo 3 V2 determines flavor, vapor density, and active compound profile. Lower temperatures (170–185 °C) emphasize terpenes and deliver mild, aromatic vapor. Higher temperatures (195–210 °C) produce thicker clouds and stronger effects.

Temperature Zones

Zone	Range	Result
Flavor	170–185 °C	Mild, aromatic, light vapor
Balanced	185–195 °C	Good flavor with visible vapor
Dense clouds	195–210 °C	Thick vapor, stronger effects

Practical Tips

Start at 180 °C and increase in 5-degree steps
Finer grind often needs 5–10 °C lower temperature
In cold environments, raise starting temp by 5 °C

How Do I Charge the Battery Properly?

The Solo 3 V2 battery lasts several sessions with typical use. For maximum lifespan, keep the battery between 20% and 80% and avoid deep discharge. USB-C charging with a quality power adapter speeds up charging.

Battery Tips

Do not leave on the charger permanently — unplug after 100%
For replaceable batteries: use original or recommended cells
Battery performance drops in cold — let it warm up before sessions
Pass-through charging (if supported) allows use while charging

Solo 3 V2 vs Solo 2 MAX

Both Arizer portables with hybrid heating and glass vapor path. The Solo 3 V2 heats up in 15s (vs 30s), has 5000mAh battery and app control. The Solo 2 MAX is ~55 EUR cheaper.

Feature	Solo 3 V2	Solo 2 MAX
Price (from)	~155 EUR	~101 EUR
Heating	Hybrid	Hybrid
Max Temperature	220°C	220°C
Heat-up Time	15 seconds	30 seconds
Battery	5,000 mAh	3,400 mAh
App Control	Yes	No
Glass Vapor Path	Yes	Yes
Dosing Capsules	Yes	Yes
Passthrough Charging	Yes	Yes
Water Adapter	Yes	Yes

Solo 3 V2 vs Extreme Q

Portable vs Desktop: The Solo 3 V2 is Arizer's best portable with USB-C and 25-second heat-up. The Extreme Q is a desktop with balloon and whip modes, fan assist and goes up to 260°C. The choice depends on where you use it.

Feature	Solo 3 V2	Extreme Q
Price (from)	~149 EUR	~109 EUR
Type	Portable	Desktop
Heating	Convection	Convection
Max Temperature	220°C	260°C
Heat-up Time	~25 seconds	~120 seconds
Balloon Mode	No	Yes
Whip Mode	No	Yes
Fan Assist	No	Yes
Battery	3,500 mAh	AC Power
USB-C Charging	Yes	–
Glass Stems	Yes	Yes
Warranty	Lifetime	Lifetime

Solo 3 V2 vs Air MAX

Both Arizer portables with convection heating and 220°C. The Solo 3 V2 has a bigger internal battery (3500mAh) and USB-C. The Air MAX has a replaceable 18650 battery (2600mAh) — great for long sessions on the go with spare batteries.

Feature	Solo 3 V2	Air MAX
Price (from)	~149 EUR	~129 EUR
Heating	Convection	Convection
Max Temperature	220°C	220°C
Heat-up Time	~25 seconds	~50 seconds
Battery	3,500 mAh (internal)	2,600 mAh (18650)
Replaceable Battery	No	Yes
USB-C Charging	Yes	Yes
Glass Stems	Yes (Solo Stem)	Yes (Air Stem)
Passthrough Charging	Yes	No
Display	Yes (OLED)	Yes (OLED)
Weight	~209 g	~102 g
Warranty	Lifetime	Lifetime

Product Comparisons 21

Comparison: Solo 3 vs Venty

The Venty by Storz & Bickel and the Solo 3 are the two current top portables. Here are the main differences:

Feature	Solo 3 V2	Venty
Size/Weight	210g, 11.5cm	203g, 11.8cm
Battery	5000mAh, ~10 sessions	5000mAh, ~10 sessions
Heating	80/20 Hybrid	90/10 Hybrid
Modes	Session + On-Demand	Session only
Airflow	Fixed (moderate)	Adjustable (Dial)
Cooling	Glass stems	Metal cooling
App	No	Yes (Web app)
Price	~179€	~349€

The Venty scores with app control, adjustable airflow, and stronger convection. The Solo 3 has on-demand mode, which the Venty lacks, and costs half as much. Both have excellent flavor and extraction. The Venty is somewhat more powerful, the Solo 3 more versatile. If you want maximum performance and don't mind the price, get the Venty. If you're looking for versatility and value, the Solo 3 is unbeatable.

Comparison: Solo 3 vs Solo 2

The Solo 3 is a massive upgrade over the Solo 2. Arizer didn't just tweak details but completely redesigned the heating element and chamber.

Feature	Solo 3 V2	Solo 2
Heating	80/20 Hybrid, redesigned	Conduction/Hybrid
Chamber	Deeper (XL stems usable)	Shallower (XL pointless)
Modes	Session + On-Demand	Session only
Display	Brighter, color, rotates	Dimmer, color
Stems in kit	4 (2x regular, 2x XL)	2 (regular only)
Heatup	15 seconds	30 seconds
Battery	5000mAh	3400mAh
Size	11.5cm, 210g	11.3cm, 160g
Pocket-friendly	No (wider)	Yes

The Solo 2 is more compact and fits in your pocket. But the Solo 3 is superior in every other aspect: faster heating, double battery life, XL stems usable, on-demand mode, better display. If you already own the Solo 2 and are happy with it, upgrading isn't mandatory. But if you're looking for a new portable, the Solo 3 is the clearly better choice. The Solo 2 remains relevant for users who need absolutely compact devices.

See the full Solo 2 price comparison

Comparison: Solo 3 V2 vs. Air MAX

	Solo 3 V2	Air MAX
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	60s
Battery	5000 mAh	5000 mAh
Price from	199€	92€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The Air MAX is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full Air MAX price comparison

Comparison: Solo 3 V2 vs. Veazy

	Solo 3 V2	Veazy
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	40s
Battery	5000 mAh	N/A (AC)
Price from	203€	179€

The Solo 3 V2 by Arizer starts at 203€ and heats up in 15 seconds. The Veazy by Veazy starts at 179€ with a 40-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Veazy price comparison

Comparison: Solo 3 V2 vs. PAX Flow

	Solo 3 V2	PAX Flow
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	225 °C
Heat-up time	15s	35s
Battery	5000 mAh	N/A (AC)
Price from	203€	190€

The Solo 3 V2 by Arizer starts at 203€ and heats up in 15 seconds. The PAX Flow by PAX starts at 190€ with a 35-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full PAX Flow price comparison

Comparison: Solo 3 V2 vs. Crafty+

	Solo 3 V2	Crafty+
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	60s
Battery	5000 mAh	N/A (AC)
Price from	203€	189€

The Solo 3 V2 by Arizer starts at 203€ and heats up in 15 seconds. The Crafty+ by Storz & Bickel starts at 189€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

See the full Crafty+ price comparison

Comparison: Solo 3 V2 vs. XQ2

	Solo 3 V2	XQ2
Type	Portable	Desktop
Heating	Hybrid (Conv. + Cond.)	Convection
Temperature	220 °C	260 °C
Heat-up time	15s	90s
Battery	5000 mAh	N/A (AC)
Price from	203€	117€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The XQ2 is the right pick for those who want a desktop unit and are comfortable with a 90-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full XQ2 price comparison

Comparison: Solo 3 V2 vs. IQ3

	Solo 3 V2	IQ3
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Conduction
Temperature	220 °C	221 °C
Heat-up time	15s	30s
Battery	5000 mAh	4000 mAh
Price from	203€	182€

The Solo 3 V2 by Arizer starts at 203€ and heats up in 15 seconds. The IQ3 by DaVinci starts at 182€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full IQ3 price comparison

Comparison: Solo 3 V2 vs. HyperDyn

	Solo 3 V2	HyperDyn
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Conduction
Temperature	220 °C	220 °C
Heat-up time	15s	8s
Battery	5000 mAh	3400 mAh
Price from	203€	183€

The Solo 3 V2 by Arizer starts at 203€ and heats up in 15 seconds. The HyperDyn by DynaVap starts at 183€ with a 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full HyperDyn price comparison

Comparison: Solo 3 V2 vs. Air SE

	Solo 3 V2	Air SE
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	60s
Battery	5000 mAh	3350 mAh
Price from	153€	55€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The Air SE is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full Air SE price comparison

Comparison: Solo 3 V2 vs. New Proxy

	Solo 3 V2	New Proxy
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Conduction
Temperature	220 °C	285 °C
Heat-up time	15s	30s
Battery	5000 mAh	1680 mAh
Price from	153€	180€

The Solo 3 V2 by Arizer starts at 153€ and heats up in 15 seconds. The New Proxy by Puffco starts at 180€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full New Proxy price comparison

Comparison: Solo 3 V2 vs. Extreme Q

	Solo 3 V2	Extreme Q
Type	Portable	Desktop
Heating	Hybrid (Conv. + Cond.)	Convection
Temperature	220 °C	260 °C
Heat-up time	15s	120s
Battery	5000 mAh	N/A (AC)
Price from	153€	84€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The Extreme Q is the right pick for those who want a desktop unit and are comfortable with a 120-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full Extreme Q price comparison

Comparison: Solo 3 V2 vs. Solo 2 MAX

	Solo 3 V2	Solo 2 MAX
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	30s
Battery	5000 mAh	3400 mAh
Price from	153€	59€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The Solo 2 MAX is the right pick for those who want a portable device and are comfortable with a 30-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full Solo 2 MAX price comparison

Comparison: Solo 3 V2 vs. ArGo

	Solo 3 V2	ArGo
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	60s
Battery	5000 mAh	3400 mAh
Price from	153€	64€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The ArGo is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full ArGo price comparison

Comparison: Solo 3 V2 vs. V-Tower

	Solo 3 V2	V-Tower
Type	Portable	Desktop
Heating	Hybrid (Conv. + Cond.)	Convection
Temperature	220 °C	260 °C
Heat-up time	15s	60s
Battery	5000 mAh	N/A (AC)
Price from	153€	0€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The V-Tower is the right pick for those who want a desktop unit and are comfortable with a 60-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full V-Tower price comparison

Comparison: Solo 3 V2 vs. IQC

	Solo 3 V2	IQC
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Conduction
Temperature	220 °C	221 °C
Heat-up time	15s	30s
Battery	5000 mAh	3000 mAh
Price from	153€	124€

The Solo 3 V2 by Arizer starts at 153€ and heats up in 15 seconds. The IQC by DaVinci starts at 124€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full IQC price comparison

Comparison: Solo 3 V2 vs. Peak

	Solo 3 V2	Peak
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Conduction
Temperature	220 °C	316 °C
Heat-up time	15s	20s
Battery	5000 mAh	1400 mAh
Price from	153€	141€

The Solo 3 V2 by Arizer starts at 153€ and heats up in 15 seconds. The Peak by Puffco starts at 141€ with a 20-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Peak price comparison

Comparison: Solo 3 V2 vs. Solo 2

	Solo 3 V2	Solo 2
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	30s
Battery	5000 mAh	3400 mAh
Price from	153€	0€

The Solo 3 V2 suits users who prefer a portable device and appreciate a heat-up time of just 15 seconds. The Solo 2 is the right pick for those who want a portable device and are comfortable with a 30-second heat-up time. Both devices come from Arizer and deliver excellent vapor quality.

See the full Solo 2 price comparison

Comparison: Solo 3 V2 vs. Zeus Arc GT4

	Solo 3 V2	Zeus Arc GT4
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Conduction
Temperature	220 °C	255 °C
Heat-up time	15s	35s
Battery	5000 mAh	3500 mAh
Price from	153€	180€

The Solo 3 V2 by Arizer starts at 153€ and heats up in 15 seconds. The Zeus Arc GT4 by Zeus starts at 180€ with a 35-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the full Zeus Arc GT4 price comparison

Comparison: Solo 3 V2 vs. Venty

	Solo 3 V2	Venty
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	20s
Battery	5000 mAh	3000 mAh
Price from	147€	166€

The Solo 3 V2 by Arizer starts at 147€ and heats up in 15 seconds. The Venty by Storz & Bickel starts at 166€ with a 20-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

Comparison: Solo 3 V2 vs. Mighty+

	Solo 3 V2	Mighty+
Type	Portable	Portable
Heating	Hybrid (Conv. + Cond.)	Hybrid (Conv. + Cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	60s
Battery	5000 mAh	3200 mAh
Price from	147€	143€

The Solo 3 V2 by Arizer starts at 147€ and heats up in 15 seconds. The Mighty+ by Storz & Bickel starts at 143€ with a 60-second heat-up time. Both devices use Hybrid (Conv. + Cond.) and suit demanding users in this price range.

Frequently Asked Questions

How long is the heatup time on the Solo 3? +

The Solo 3 heats up in 5-15 seconds, depending on target temperature. At 193°C it takes about 10-12 seconds. That's twice as fast as the Solo 2 (30 seconds).

What's the difference between Session and On-Demand mode? +

In Session mode, a continuous 5-20 minute session runs with constant temperature. In On-Demand mode, you start each inhalation individually – the device heats up, you draw, then it cools down. On-Demand preserves your material between draws.

How many draws do I get from one load? +

With an XL stem at 193°C, you get 4-6 powerful draws in Session mode. In On-Demand mode, it's 2-5 draws per load, depending on heat level. Regular stems have about half.

Can I use XL stems on the Solo 2? +

Technically yes, but it doesn't make much sense. The Solo 2's heating chamber is shallower, so herb in XL stems sits too close to the seal where there's no heat. On the Solo 3, the chamber is deeper – XL stems work perfectly.

How long does the battery last? +

With 5,000 mAh, you get about 10 sessions per charge. That's comparable to the Storz & Bickel Venty and is top-tier for portables. The battery is replaceable; a spare doubles runtime.

What temperature is best? +

193°C (380°F) is the sweet spot according to users and reviews. Below that, AVB stays only brown; above that, the bottom turns blackish. At 193°C you get maximum flavor, thick clouds, and clean AVB.

Can I use the Solo 3 with a water pipe? +

Yes, two WPA stems (regular + XL) are included. They fit 14mm bubblers. The display automatically rotates when you flip the device. On-Demand mode is ideal for water pipes.

How do I clean the glass stems? +

Empty stems immediately after session while warm. Clean the screen holes with a brush. For deeper cleaning: Soak stems in isopropyl alcohol, then rinse with warm water.

Is the Solo 3 pocket-friendly? +

Somewhat. At 210g and 11.5cm height, it's larger than the Solo 2. It fits in loose pockets, not tight ones. For on-the-go, a bag or jacket is better. The larger size was necessary for the deeper chamber and bigger battery.

Can I vape while charging? +

Yes, passthrough charging is supported. You can plug the Solo 3 into USB-C and use it simultaneously. This doesn't preserve battery life, but it works.

What does 80/20 hybrid heating mean? +

80% of the heating is convection (hot air while drawing), 20% is conduction (contact with the warm glass). Conduction keeps the glass preheated, convection extracts while drawing. This is the ideal balance.

How much herb fits in the stems? +

Regular stems hold about 0.1g, XL stems about 0.2g. The XL variant has double capacity and delivers proportionally more vapor and effects per session.