Pros
- Session and on-demand modes
- Four glass aroma tubes included
- 5–15 second heat-up
- Up to three hours of use
- USB-C Power Delivery and use while charging
Cons
- 280 g and 130 mm tall
- Internal battery is not user-replaceable
- No companion app
- Glass parts excluded from warranty
Current offers from our partner shops
All prices come from automated shop queries. Some shop links are affiliate links.
How to Use - Getting Started for the Solo 3 V2. You can find the complete overview on the main page.
How to Use - Getting Started
Dry herb is loaded into one of the four supplied glass aroma tubes: regular and XL tubes plus regular and XL 14 mm frosted tubes.
Session mode, on-demand mode, temperature and settings are controlled with the buttons and colour display on the device. There is no companion app. Arizer specifies a 5-15 second heat-up depending on the target temperature.
Charging uses USB-C Power Delivery and use while charging is supported. The internal battery is not user-replaceable; Arizer offers a manufacturer battery-replacement service.
Direct comparisons
Solo 3 V2 Guides & Niches
The Solo 3 heats up in 5-15 seconds, depending on the target temperature. At 193°C, it takes around 10-12 seconds. That is twice as fast as the Solo 2 (30 seconds).
In Session mode, you get a continuous 5-20-minute session at a constant temperature. In On-Demand mode, you start each inhalation individually – the device heats up, you draw, then it cools down. On-Demand preserves your material between draws.
With an XL stem at 193°C, you get 4-6 strong draws in Session mode. In On-Demand mode, it is 2-5 draws per load, depending on the heat level. The regular stems hold about half that.
Technically yes, but it makes little sense. The Solo 2 heating chamber is shallower, so the herb in XL stems sits too close to the seal, where there is no heat. On the Solo 3, the chamber is deeper – XL stems work perfectly.
Arizer advertises up to three hours of use per charge. Actual runtime depends on mode, temperature and session length. The internal battery is not user-replaceable; Arizer offers a replacement service.
193°C (380°F) is the sweet spot according to users and reviews. Below that, the AVB stays just brown; above it, the bottom turns blackish. At 193°C, you get maximum flavour, dense clouds and clean AVB.
Yes, two WPA stems (regular + XL) are included. They fit 14mm bubblers. The display rotates automatically when you turn the device upside down. On-Demand mode is ideal for water pipes.
Empty the stems immediately after the session while they are still warm. Clean the screen holes with a brush. For deeper cleaning: soak the stems in isopropyl alcohol, then rinse with warm water.
At 280 g and 130 mm tall, Solo 3 V2 is better carried in a bag or jacket than in a tight trouser pocket. The body measures 49 × 32 × 130 mm, and the glass tube also needs protection in transit.
Yes, pass-through charging is supported. You can keep the Solo 3 plugged in via USB-C and use it at the same time. It is not the best thing for the battery, but it works.
80% of the heating is done by convection (hot air while drawing), 20% by conduction (contact with the warm glass). The conduction keeps the glass preheated, while convection extracts during the draw. That is the ideal balance.
The regular stems hold about 0.1g, while the XL stems hold about 0.2g. The XL version has double the capacity and accordingly delivers more vapour and effect per session.
Comments
No comments yet. Be the first!
Sign in to comment