1/6

Arizer Solo 3 V2

Name: Arizer Solo 3 V2
Brand: Arizer
Availability: InStock

Arizer

Best Price

173,58

€

Available at 24 shops

My Alerts

Get notified for free when the price drops

Pros

5000-mAh battery lasts longer than competing models
Lifetime warranty, replaceable battery
15-second heat-up time for quick use
Water pipe compatible with app control

Cons

210g weight is heavier in the portable segment
50–220°C range requires temperature management
Hybrid heating not optimal for large quantities

Last updated: 02/05/2026, 10:38 AM

* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.

🔔

Set a Price Alert Get notified when the price drops.

Buy Arizer Solo 3 V2 at the best price

The Arizer Solo 3 V2 is currently available from €173,58 at 24 shops. The cheapest offer is at VapeNorth.

Prices range by €241,41 — comparing is worth it.

Tip: Set a price alert and wait for the right moment.

Go to Best Deal →

The Solo 3 V2 by Arizer is a portable hybrid vaporizer. Temperature range spans 50 to 220 degrees Celsius with a 15-second heat-up time. The battery offers 5000 mAh capacity. Currently from 173.58 EUR across 24 shops (as of May 2, 2026).

Last updated: 02/05/2026, 10:38 AM

Specifications

Specifications
Heating Method	Hybrid
Device Type	Portable
Brand	Arizer
Power Source	Battery
Temperature Range	50°C - 220°C
Heat-up Time	15 seconds
Battery Capacity	5000 mAh
Weight	185 g
Dimensions	4.6 x 3.5 x 11.5 cm
Auto Shutoff	20 min
Warranty	99 years
App Control	Yes
Water Pipe Compatible	View water pipe adapters
Session Mode	Session & On-Demand
Temperature Control	Digital
Material	Dry Herb
Vapor Path	Glass
Battery Type	18650 Li-Ion
Battery Count	2
Replaceable Battery	Yes
Passthrough Charging	Yes
Charging Port	usb-c

Source: OfficialOfficial, OfficialOfficial, MagicVaporizersAggregator · Verified 20.02.2026

About this vaporizer

The Arizer Solo 3 V2 combines convection and conduction heating with a 5000 mAh battery for extended sessions. Heats up in 15 seconds through a pure glass airpath. USB-C charging with pass-through support. From the Canadian manufacturer known for medical-grade build quality.

Pros

5000-mAh battery lasts longer than competing models
Lifetime warranty, replaceable battery
15-second heat-up time for quick use
Water pipe compatible with app control

Cons

210g weight is heavier in the portable segment
50–220°C range requires temperature management
Hybrid heating not optimal for large quantities

Read our full review →

Key Facts — Arizer Solo 3 V2 Portable · Heating: Hybrid · Heat-up: 15s · Battery: 5000 mAh · Weight: 185g · From: €174 · Shops: 24

The Arizer Solo 3 V2 is the biggest innovation to come out of Canada in the last five years. Arizer kicked off the glass stem era with the Solo model in 2013 and has shaped the market ever since. Now the third generation arrives with a revolution: dual-mode operation. Session mode for relaxed 10-minute sessions or On-Demand for spontaneous single draws. An 80/20 hybrid heater (convection/conduction) combined with four glass stems in the box, including two XL stems with double capacity. The colour display is brighter than on the predecessor and even rotates when you turn the Solo 3 upside down for the water pipe. With a 5,000 mAh replaceable battery, you can manage over 10 sessions per charge. You can set the temperature in 1-degree steps between 50-220°C. The Solo 3 is available from ~179€ in 38 shops – take a look at the price comparison.

See also: XQ2 · Extreme Q · Air MAX · ArGo

Operation & Use

The Arizer Solo 3 V2 uses glass aroma tubes instead of a traditional chamber. The borosilicate glass ensures pure flavour with no plastic or metal in the vapour path. With 5000 mAh, it has the largest battery in its class – enough for 15–20 sessions per charge.

1. First charge

Connect the Solo 3 V2 via the USB-C cable. The 5000-mAh battery takes around 2.5–3 hours for a full charge. You can vape while charging (pass-through charging). The OLED display shows the battery level as a percentage.

2. Fill the glass tube

Grind your herb medium-fine. Hold the glass tube upright and gently press the open end into the ground material. Around 0.1–0.15 g is enough. The glass serves as both mouthpiece and chamber – so you fill it from the top. Do not pack it down: air must be able to flow through the material.

3. Insert the glass tube and choose the temperature

Insert the filled glass tube into the Solo 3 V2 heating chamber. Switch the device on (hold the button for 3 seconds). The OLED display shows the current temperature. Set your preferred temperature using the arrow buttons (50–220 °C in 1-°C steps):

180 °C – pure flavour, light vapour
195 °C – balanced, flavour plus solid clouds
210 °C – dense clouds, less aroma
220 °C – maximum, full extraction

Heat-up time is around 30 seconds. The ArGo App also allows additional temperature curves and presets.

4. Draw technique

Draw directly from the glass tube – slowly and evenly for 10–15 seconds. The glass cools the vapour naturally. A session lasts 12 minutes, after which the device switches off automatically. You can adjust the session length in the settings.

5. After the session

Switch the device off and let it cool briefly. Carefully pull out the glass tube and tap out the spent material. A light blow through the tube removes the last residue. Soak the glass tubes in isopropyl alcohol every 5–10 sessions – this keeps the flavour clean and the glass transparent.

The 5 most common beginner mistakes

Glass tube packed too tightly – This completely blocks airflow. A light press into the material is enough.
Tube not inserted deeply enough – If it sits too loosely, heat transfer is poor. Push it in firmly until it stops.
Starting temperature too high – At 220 °C, the first draw tastes harsh. Start at 180–195 °C.
Drawing too fast – With the Solo 3 V2, slow draws produce significantly more vapour than fast sucking.
Not cleaning the glass tube – Resin darkens the glass and changes the flavour. Rule: clean every 5–10 sessions.

Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases more than 95 % of the desired active compounds while largely avoiding combustion by-products. Source: PubMed 16637053

Session Mode in Detail

Session mode is your standard operating mode for relaxed vaping sessions. After switching on, it takes only 15 seconds to reach the target temperature. The default session lasts 10 minutes, but you can set it anywhere between 5 and 20 minutes. There are also three customisable presets that you can call up with a double-click – perfect for different herbs or times of day. Temperature control works in real time and adapts to your draw style. If you draw hard, the Solo 3 detects the increased airflow and boosts heating to maintain the temperature. A smart strategy is temperature stepping: start at 185°C for flavour, bump up to 193°C after a few draws for balance, and finish the session at 205°C for maximum extraction. With an XL stem at 193°C, you get 4-6 fantastic draws with dense vapour and full flavour. After that, the flavour starts to fade, even if vapour is still coming. The AVB (Already Vaped Bud) comes out brown and crisp – a sign of excellent extraction with no green spots. Session mode is ideal for sharing or when you want to sit back and vape continuously.

On-Demand Mode in Detail

On-Demand mode is the big new feature on the Solo 3 and sets it apart from the Solo 2. Here, you start each inhalation separately – like a mini session. The display shows a progress bar and beeps when the temperature is reached. You then have a 10-second window to draw (adjustable between 5-25 seconds). After the draw, the device cools down immediately and preserves your material. The brilliant part: after one draw, you can put the device down and come back an hour later – the herb is preserved, not cooked through like in Session mode. There are five heating levels that are not adjustable, but fixed at 180°C, 185°C, 193°C, 205°C and 220°C. Per XL stem, you get 2-5 strong draws, depending on the heat level. On-Demand mode also allows intense single-hit extraction: set it to maximum temperature and a 25-second draw duration, and you can extract a full load in one long pull. That is especially interesting for water pipe use. The control is precise – no accidental overheating as with butane vaporizers. On-Demand mode makes the Solo 3 a versatile device that adapts to your consumption rhythm.

XL Glass Stems – Double Capacity

The Solo 3 comes with four glass stems: two straight ones (90mm regular + XL) and two water pipe adapters (regular + XL, with frosted tips). The XL stems are the highlight because they hold double the amount of herb – about 0.2g instead of 0.1g. That means more flavour, denser draws and a stronger effect per session. The XL stems make particular sense on the Solo 3 because the heating chamber is deeper than on the Solo 2 or Air MAX. On the Solo 2, the herb in XL stems sat too close to the seal, where there is no heat – on the Solo 3, it sits perfectly in the heating zone. The best way to load is directly from the grinder: twist the stem in the herb to fill it. From a jar: dip the stem in and twist. Then tamp it lightly with your finger, give it half a turn, and the herb should sit just below the lip – not too tight, or airflow suffers. The glass stems cool the vapour significantly. Heat is generated at the bottom of the stem (which is why the herb browns there first), and by the time the vapour reaches the top, it is pleasantly cool. The WPA stems have a frosted tip for better grip in the water pipe glass. Important: empty the stems immediately after the session, otherwise the AVB sticks to the glass. A brush for the glass holes keeps everything clean.

Display & Controls

The colour display is an upgrade over the Solo 2. It is brighter, sharper and has more colour levels. Brightness can be set from 1 to 5, and even at full brightness battery consumption is minimal. Operation is via three buttons: power, left, right. To unlock the device, hold power for three seconds, then press left-up-right in that order. On the mode selection screen, you choose Session or On-Demand. Double-clicking a button brings up the three customisable presets. Holding the right button opens the settings menu: draw duration (5-25s), Celsius/Fahrenheit, notifications, brightness, display inversion and auto shut-off (5-20 minutes). Display inversion is a clever feature: when you turn the Solo 3 upside down for water pipe use (stem pointing down), the device detects the orientation and rotates the display automatically. The button functions rotate as well – what used to be "left" is now "right". That makes operation intuitive, whatever the position. Overall, the UI is well thought out and after a few sessions you know where everything is.

Heating & Vapour Quality

The Solo 3 uses an 80% convection / 20% conduction hybrid heater. The conduction keeps the glass warm, but the actual extraction happens through convective heat while drawing. This balance is ideal: the glass is preheated, but the herb does not char between draws as it would with pure conduction. Real-time temperature control is based on airflow: if you draw hard, the device boosts heating to maintain the temperature. If you draw gently, it holds naturally. The AVB comes out brown and crisp – a sign of complete extraction. No green spots, no wasted cannabinoids. The heat comes from the bottom of the stem, which is why the bottom of the herb browns first. The sweet spot is 193°C (380°F). Below that, the AVB stays just brown; above it, the bottom turns blackish. At 193°C, you get maximum flavour, dense clouds and clean AVB. The glass stems cool the vapour significantly – by the time it reaches your lips, it is pleasant. The first 4-6 draws in Session mode are outstanding in flavour; after that, the intensity fades even if vapour is still coming. Drawing slowly ("sip don't rip") is the best technique.

Water Pipe Use

The Solo 3 comes with two water pipe adapters (WPA): regular and XL, both with frosted glass tips for better grip. The WPAs fit any 14mm bubbler. If you turn the Solo 3 upside down (stem pointing down into the water pipe), the device detects the inversion and rotates the display automatically. The button functions rotate as well, so "left" is now "right" and vice versa – very well thought out. For water pipe use, On-Demand mode is recommended. Set a high temperature (205-220°C) and a long draw duration (20-25s), then you can take intense, dense pulls. The water further filters the vapour, so even high temperatures remain pleasant. You can even extract a full load in a single draw if you pull for 25 seconds at maximum level. The XL WPA stems are especially strong here because they hold double the amount of herb. That means more material for your bubbler session. One tip: let the device sit for 10-20 seconds after reaching temperature before you draw – that gives you a denser first hit. The combination of Solo 3 and water pipe is a match made in heaven: precise temperature control, strong extraction, smooth vapour.

How Long Does the Battery Last?

The Solo 3 V2 has a 5,000 mAh replaceable battery – one of the largest on the market. Per charge, you get around 10 sessions, which puts it in the top tier and makes it comparable to the Venty. The battery is replaceable, so you can double runtime with a spare battery. That is ideal for festivals, hikes or long days out. Charging is via USB-C Power Delivery, which is faster than standard USB. Pass-through charging is supported, which means you can vape while the device is plugged in. A full charge takes about 2-3 hours. The display shows the battery level as a percentage, so you always know where you stand. Compared with other portables, the runtime is excellent. Devices like the Pax Plus manage only 6-7 sessions; the Solo 3 clearly surpasses that. The combination of a large battery, efficient heating and a replaceable cell makes the Solo 3 one of the most reliable portable vaporizers. A spare battery costs around 30-40€ and is a worthwhile investment if you are often on the move.

What Are the Technical Specifications?

Specification	Solo 3 V2
Type	Portable Hybrid
Heating	80% Convection / 20% Conduction
Temperature range	50-220°C (1°C steps)
Heat-up time	5-15 seconds
Modes	Session (5-20 min) + On-Demand
Battery	5.000 mAh (replaceable)
Runtime	~10 sessions per charge
Charging	USB-C Power Delivery, Pass-through
Display	Colour, rotatable (invertible)
Stems in kit	4 (2x 90mm straight, 2x WPA, each regular + XL)
Water pipe	Yes (14mm WPA stems)
Dosing Capsules	Compatible
Weight	210g
Dimensions	4,6 x 3,5 x 11,5 cm
Finish	Glossy brushed metal
Warranty	2 years (Arizer standard)
Price	from ~179€ (38 shops)

Tips for the Solo 3

1. Draw slowly: "Sip don't rip" is the rule. Slow, steady draws give convection time to extract the herb. Fast, forceful pulls may not maintain the temperature. 2. Inhale during heat-up: As soon as you start "Heat", you can already draw lightly. Terpenes vaporise first at lower temperatures – you get an intense flavour hit before the target temperature is reached. 3. Wait 10-20 seconds: Once the target temperature is reached, wait briefly before taking the first draw. The herb and the glass need a moment to absorb the heat evenly. The first draw will then be denser. 4. Empty the stems immediately: After the session, tap the AVB out of the stem while it is still warm. Once it cools, it sticks to the glass and is harder to remove. 5. Brush for the glass holes: A small brush (often included) cleans the screen holes in the stem. That keeps airflow optimal. 6. Do not overpack: The herb should sit just below the lip of the stem. If it touches the heating element, it sticks fast and airflow suffers. 7. Temperature stepping: Start at 185°C, bump up to 193°C after a few draws, and finish at 205°C. That way you get everything out of your material. 8. XL stems for intensity: If you want dense draws and a strong effect, use the XL stems. They hold double the amount and deliver correspondingly more vapour.

Cleaning & Care

Regular cleaning keeps the Solo 3 V2 in top condition and ensures pure flavour. After each session, brush out the chamber and remove loose residue. Once a week, clean the mouthpiece and vapour path with isopropyl alcohol (min. 90%).

Cleaning intervals

Component	Frequency	Method
Chamber	After each session	Brush, tap out
Mouthpiece	Weekly	Iso bath (15 min)
Vapour path/screen	Every 2 weeks	Soak in iso, rinse out
Outer housing	As needed	Damp cloth

Avoid typical mistakes

No water in the chamber — only isopropyl or dry cleaning
Do not use sharp metal objects in the vapour path
Replace screens in good time if draw resistance increases

What Are the Ideal Temperature Settings?

The right temperature on the Solo 3 V2 determines flavour, vapour density and active compound profile. Lower temperatures (170–185 °C) emphasise terpenes and deliver mild, aromatic vapour. Higher temperatures (195–210 °C) create denser clouds and a stronger effect.

Temperature zones at a glance

Zone	Range	Result
Flavour	170–185 °C	Mild, aromatic, little visible vapour
Balance	185–195 °C	Good flavour with visible vapour
Dense clouds	195–210 °C	Powerful vapour, more intense effect

Practical tips

Start at 180 °C and increase in 5-degree steps
A finer grind often requires a temperature 5–10 °C lower
In cold surroundings, increase the starting temperature by 5 °C

How Do I Charge the Battery Properly?

The Solo 3 V2 battery lasts for several sessions with typical use. For maximum lifespan, keep the battery between 20% and 80% and avoid deep discharge. USB-C charging with a high-quality power supply speeds up the charging process.

Battery tips

Do not leave it permanently on the charger — unplug after 100%
With a replaceable battery: use original or recommended cells
Battery performance drops in the cold — let it warm up before the session
Pass-through charging (if supported) allows use while charging

Solo 3 V2 vs Solo 2 MAX

Both are Arizer portables with hybrid heating and a glass vapour path. The Solo 3 V2 heats up in 15s (instead of 30s), has a 5000mAh battery and app control. The Solo 2 MAX is ~55 EUR cheaper.

Feature	Solo 3 V2	Solo 2 MAX
Price (from)	~155 EUR	~101 EUR
Heating	Hybrid	Hybrid
Max. temperature	220°C	220°C
Heat-up time	15 seconds	30 seconds
Battery	5.000 mAh	3.400 mAh
App control	Yes	No
Glass vapour path	Yes	Yes
Dosing capsules	Yes	Yes
Pass-through charging	Yes	Yes
Water adapter	Yes	Yes

Solo 3 V2 vs Extreme Q

Portable vs desktop: the Solo 3 V2 is Arizer's best portable with USB-C and a 25-second heat-up time. The Extreme Q is a desktop with balloon and whip mode, fan assist and goes up to 260°C. The choice depends on where you plan to use it.

Feature	Solo 3 V2	Extreme Q
Price (from)	~149 EUR	~109 EUR
Type	Portable	Desktop
Heating	Convection	Convection
Max. temperature	220°C	260°C
Heat-up time	~25 seconds	~120 seconds
Balloon mode	No	Yes
Whip mode	No	Yes
Fan assist	No	Yes
Battery	3.500 mAh	Mains powered
USB-C charging	Yes	–
Glass mouthpieces	Yes	Yes
Warranty	Lifetime	Lifetime

Solo 3 V2 vs Air MAX

Both are Arizer portables with convection heating and 220°C. The Solo 3 V2 has a larger internal battery (3500mAh) and USB-C. The Air MAX has a replaceable battery (18650, 2600mAh) — ideal for long sessions on the go with spare batteries.

Feature	Solo 3 V2	Air MAX
Price (from)	~149 EUR	~129 EUR
Heating	Convection	Convection
Max. temperature	220°C	220°C
Heat-up time	~25 seconds	~50 seconds
Battery	3.500 mAh (fixed)	2.600 mAh (18650)
Replaceable battery	No	Yes
USB-C charging	Yes	Yes
Glass mouthpieces	Yes (Solo Stem)	Yes (Air Stem)
Pass-through charging	Yes	No
Display	Yes (OLED)	Yes (OLED)
Weight	~209 g	~102 g
Warranty	Lifetime	Lifetime

Product Comparisons 21

Comparison: Solo 3 vs Venty

The Venty from Storz & Bickel and the Solo 3 are the two current top portables. Here are the main differences:

Feature	Solo 3 V2	Venty
Size/Weight	210g, 11,5cm	203g, 11,8cm
Battery	5000mAh, ~10 Sessions	5000mAh, ~10 Sessions
Heating	80/20 Hybrid	90/10 Hybrid
Modes	Session + On-Demand	Session only
Airflow	Fixed (moderate)	Adjustable (dial)
Cooling	Glass stems	Metal cooling
App	No	Yes (web app)
Price	~179€	~349€

The Venty scores with app control, adjustable airflow and stronger convection. The Solo 3 has On-Demand mode, which the Venty does not offer, and costs half as much. Both have excellent flavour and extraction. The Venty is slightly more powerful, the Solo 3 more versatile. If you want maximum performance and are not put off by the price, choose the Venty. If you want versatility and value for money, the Solo 3 is unbeatable.

Comparison: Solo 3 vs Solo 2

The Solo 3 is a massive upgrade over the Solo 2. Arizer has not just tweaked the details, but completely redesigned the heating element and chamber.

Feature	Solo 3 V2	Solo 2
Heating	80/20 Hybrid, newly developed	Conduction/Hybrid
Chamber	Deeper (XL stems usable)	Shallower (XL pointless)
Modes	Session + On-Demand	Session only
Display	Brighter, colour, rotates	Darker, colour
Stems in kit	4 (2x regular, 2x XL)	2 (regular only)
Heat-up	15 seconds	30 seconds
Battery	5000mAh	3400mAh
Size	11,5cm, 210g	11,3cm, 160g
Pocket-friendly	No (wider)	Yes

The Solo 2 is more compact and fits in a trouser pocket. In every other respect, though, the Solo 3 is superior: faster heating, twice the battery life, usable XL stems, On-Demand mode, better display. If you already own the Solo 2 and are happy with it, an upgrade is not essential. But if you are looking for a new portable, the Solo 3 is clearly the better choice. The Solo 2 remains relevant for users who need an absolutely compact device.

See the detailed Solo 2 price comparison

Comparison: Solo 3 V2 vs. Air MAX

	Solo 3 V2	Air MAX
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	60s
Battery	5000 mAh	5000 mAh
Starting price	199€	92€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The Air MAX is the right choice for anyone looking for a portable device and happy with a 60-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed Air MAX price comparison

Comparison: Solo 3 V2 vs. Veazy

	Solo 3 V2	Veazy
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	40s
Battery	5000 mAh	N/A (AC)
Starting price	203€	179€

The Solo 3 V2 from Arizer starts at 203€ and heats up in 15 seconds. The Veazy from Veazy comes in at 179€ with a 40-second heat-up time. Both devices use Hybrid (conv. + cond.) and suit demanding users in this price range.

See the detailed Veazy price comparison

Comparison: Solo 3 V2 vs. PAX Flow

	Solo 3 V2	PAX Flow
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	225 °C
Heat-up time	15s	35s
Battery	5000 mAh	N/A (AC)
Starting price	203€	190€

The Solo 3 V2 from Arizer starts at 203€ and heats up in 15 seconds. The PAX Flow from PAX comes in at 190€ with a 35-second heat-up time. Both devices use Hybrid (conv. + cond.) and suit demanding users in this price range.

See the detailed PAX Flow price comparison

Comparison: Solo 3 V2 vs. Crafty+

	Solo 3 V2	Crafty+
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	60s
Battery	5000 mAh	N/A (AC)
Starting price	203€	189€

The Solo 3 V2 from Arizer starts at 203€ and heats up in 15 seconds. The Crafty+ from Storz & Bickel comes in at 189€ with a 60-second heat-up time. Both devices use Hybrid (conv. + cond.) and suit demanding users in this price range.

See the detailed Crafty+ price comparison

Comparison: Solo 3 V2 vs. XQ2

	Solo 3 V2	XQ2
Type	Portable	Desktop
Heating	Hybrid (conv. + cond.)	Convection
Temperature	220 °C	260 °C
Heat-up time	15s	90s
Battery	5000 mAh	N/A (AC)
Starting price	203€	117€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The XQ2 is the right choice for anyone looking for a desktop device and happy with a 90-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed XQ2 price comparison

Comparison: Solo 3 V2 vs. IQ3

	Solo 3 V2	IQ3
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Conduction
Temperature	220 °C	221 °C
Heat-up time	15s	30s
Battery	5000 mAh	4000 mAh
Starting price	203€	182€

The Solo 3 V2 from Arizer starts at 203€ and heats up in 15 seconds. The IQ3 from DaVinci comes in at 182€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the detailed IQ3 price comparison

Comparison: Solo 3 V2 vs. HyperDyn

	Solo 3 V2	HyperDyn
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Conduction
Temperature	220 °C	220 °C
Heat-up time	15s	8s
Battery	5000 mAh	3400 mAh
Starting price	203€	183€

The Solo 3 V2 from Arizer starts at 203€ and heats up in 15 seconds. The HyperDyn from DynaVap comes in at 183€ with an 8-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the detailed HyperDyn price comparison

Comparison: Solo 3 V2 vs. Air SE

	Solo 3 V2	Air SE
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	60s
Battery	5000 mAh	3350 mAh
Starting price	153€	55€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The Air SE is the right choice for anyone looking for a portable device and happy with a 60-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed Air SE price comparison

Comparison: Solo 3 V2 vs. New Proxy

	Solo 3 V2	New Proxy
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Conduction
Temperature	220 °C	285 °C
Heat-up time	15s	30s
Battery	5000 mAh	1680 mAh
Starting price	153€	180€

The Solo 3 V2 from Arizer starts at 153€ and heats up in 15 seconds. The New Proxy from Puffco comes in at 180€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the detailed New Proxy price comparison

Comparison: Solo 3 V2 vs. Extreme Q

	Solo 3 V2	Extreme Q
Type	Portable	Desktop
Heating	Hybrid (conv. + cond.)	Convection
Temperature	220 °C	260 °C
Heat-up time	15s	120s
Battery	5000 mAh	N/A (AC)
Starting price	153€	84€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The Extreme Q is the right choice for anyone looking for a desktop device and happy with a 120-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed Extreme Q price comparison

Comparison: Solo 3 V2 vs. Solo 2 MAX

	Solo 3 V2	Solo 2 MAX
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	30s
Battery	5000 mAh	3400 mAh
Starting price	153€	59€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The Solo 2 MAX is the right choice for anyone looking for a portable device and happy with a 30-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed Solo 2 MAX price comparison

Comparison: Solo 3 V2 vs. ArGo

	Solo 3 V2	ArGo
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	60s
Battery	5000 mAh	3400 mAh
Starting price	153€	64€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The ArGo is the right choice for anyone looking for a portable device and happy with a 60-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed ArGo price comparison

Comparison: Solo 3 V2 vs. V-Tower

	Solo 3 V2	V-Tower
Type	Portable	Desktop
Heating	Hybrid (conv. + cond.)	Convection
Temperature	220 °C	260 °C
Heat-up time	15s	60s
Battery	5000 mAh	N/A (AC)
Starting price	153€	0€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The V-Tower is the right choice for anyone looking for a desktop device and happy with a 60-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed V-Tower price comparison

Comparison: Solo 3 V2 vs. IQC

	Solo 3 V2	IQC
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Conduction
Temperature	220 °C	221 °C
Heat-up time	15s	30s
Battery	5000 mAh	3000 mAh
Starting price	153€	124€

The Solo 3 V2 from Arizer starts at 153€ and heats up in 15 seconds. The IQC from DaVinci comes in at 124€ with a 30-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the detailed IQC price comparison

Comparison: Solo 3 V2 vs. Peak

	Solo 3 V2	Peak
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Conduction
Temperature	220 °C	316 °C
Heat-up time	15s	20s
Battery	5000 mAh	1400 mAh
Starting price	153€	141€

The Solo 3 V2 from Arizer starts at 153€ and heats up in 15 seconds. The Peak from Puffco comes in at 141€ with a 20-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the detailed Peak price comparison

Comparison: Solo 3 V2 vs. Solo 2

	Solo 3 V2	Solo 2
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	220 °C
Heat-up time	15s	30s
Battery	5000 mAh	3400 mAh
Starting price	153€	0€

The Solo 3 V2 is better suited to users who prefer a portable device and appreciate a heat-up time of only 15 seconds. The Solo 2 is the right choice for anyone looking for a portable device and happy with a 30-second heat-up time. Both devices come from Arizer and offer high vapour quality.

See the detailed Solo 2 price comparison

Comparison: Solo 3 V2 vs. Zeus Arc GT4

	Solo 3 V2	Zeus Arc GT4
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Conduction
Temperature	220 °C	255 °C
Heat-up time	15s	35s
Battery	5000 mAh	3500 mAh
Starting price	153€	180€

The Solo 3 V2 from Arizer starts at 153€ and heats up in 15 seconds. The Zeus Arc GT4 from Zeus comes in at 180€ with a 35-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.

See the detailed Zeus Arc GT4 price comparison

Comparison: Solo 3 V2 vs. Venty

	Solo 3 V2	Venty
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	20s
Battery	5000 mAh	3000 mAh
Starting price	147€	166€

The Solo 3 V2 from Arizer starts at 147€ and heats up in 15 seconds. The Venty from Storz & Bickel comes in at 166€ with a 20-second heat-up time. Both devices use Hybrid (conv. + cond.) and suit demanding users in this price range.

Comparison: Solo 3 V2 vs. Mighty+

	Solo 3 V2	Mighty+
Type	Portable	Portable
Heating	Hybrid (conv. + cond.)	Hybrid (conv. + cond.)
Temperature	220 °C	210 °C
Heat-up time	15s	60s
Battery	5000 mAh	3200 mAh
Starting price	147€	143€

The Solo 3 V2 from Arizer starts at 147€ and heats up in 15 seconds. The Mighty+ from Storz & Bickel comes in at 143€ with a 60-second heat-up time. Both devices use Hybrid (conv. + cond.) and suit demanding users in this price range.

Frequently Asked Questions

How long is the Solo 3 heat-up time? +

The Solo 3 heats up in 5-15 seconds, depending on the target temperature. At 193°C, it takes around 10-12 seconds. That is twice as fast as the Solo 2 (30 seconds).

What is the difference between Session mode and On-Demand mode? +

In Session mode, you get a continuous 5-20-minute session at a constant temperature. In On-Demand mode, you start each inhalation individually – the device heats up, you draw, then it cools down. On-Demand preserves your material between draws.

How many draws do I get from one load? +

With an XL stem at 193°C, you get 4-6 strong draws in Session mode. In On-Demand mode, it is 2-5 draws per load, depending on the heat level. The regular stems hold about half that.

Can I use the XL stems with the Solo 2 as well? +

Technically yes, but it makes little sense. The Solo 2 heating chamber is shallower, so the herb in XL stems sits too close to the seal, where there is no heat. On the Solo 3, the chamber is deeper – XL stems work perfectly.

How long does the battery last? +

With 5.000 mAh, you get around 10 sessions per charge. That is comparable to the Storz & Bickel Venty and is in the upper tier among portables. The battery is replaceable, and a spare battery doubles the runtime.

Which temperature is best? +

193°C (380°F) is the sweet spot according to users and reviews. Below that, the AVB stays just brown; above it, the bottom turns blackish. At 193°C, you get maximum flavour, dense clouds and clean AVB.

Can I use the Solo 3 with a water pipe? +

Yes, two WPA stems (regular + XL) are included. They fit 14mm bubblers. The display rotates automatically when you turn the device upside down. On-Demand mode is ideal for water pipes.

How do I clean the glass stems? +

Empty the stems immediately after the session while they are still warm. Clean the screen holes with a brush. For deeper cleaning: soak the stems in isopropyl alcohol, then rinse with warm water.

Is the Solo 3 pocket-friendly? +

To a degree. At 210g and 11,5cm tall, it is larger than the Solo 2. It fits in roomy trouser pockets, but not really in tight ones. For travelling, a bag or jacket is better. The larger build was necessary for the deeper chamber and the bigger battery.

Can I vape while charging? +

Yes, pass-through charging is supported. You can keep the Solo 3 plugged in via USB-C and use it at the same time. It is not the best thing for the battery, but it works.

What does 80/20 hybrid heating mean? +

80% of the heating is done by convection (hot air while drawing), 20% by conduction (contact with the warm glass). The conduction keeps the glass preheated, while convection extracts during the draw. That is the ideal balance.

How much herb fits in the stems? +

The regular stems hold about 0.1g, while the XL stems hold about 0.2g. The XL version has double the capacity and accordingly delivers more vapour and effect per session.