Storz & Bickel Plenty is a desktop dry-herb vaporizer. VapoChecker compares current offers from €168.75 (plus shipping) across 10 shops (as of Oct 19, 2026).Price basis: Item price excluding shipping and coupons
Prices range by €212.52 — comparing is worth it. Possible import duties are added depending on the delivery country.
The Plenty by Storz & Bickel is a desktop hybrid vaporizer. Temperature range spans 130 to 202 degrees Celsius with a 270-second heat-up time. Currently from 168.75 € across 10 shops (as of Oct 19, 2026; incl. shipping).
Storz & Bickel Plenty. Desktop, hybrid heater, 130 to 202°C. The warm-up time of around 5 minutes is normal for a desktop device. Large chamber — ideal for groups or long sessions without refills. Fits with Mighty dosing capsule. Concentrates go via the liquid pad. Stainless steel and aluminum, cooling coil for cooled trains. 2 year guarantee. German precision device, not a toy.
Heat-up takes about 4.5 minutes at step 5 (around 180 degrees Celsius). Inhalation works through a tube with mouthpiece, powered entirely by lung draw without any pump. The PLENTY has no display, no app, no Bluetooth. A bimetal temperature controller regulates the heater in a purely electromechanical way. At 700 grams, with an extra-wide filling chamber (3.4 cm3, roughly 600 mg) and a stainless steel cooling spiral for smooth vapor, the PLENTY retails at 248 euros.
The PLENTY stands out with its pistol-grip design. Unlike desktop vaporizers, it is held in the hand but stays connected to a power outlet via a fixed power cable at all times. No battery, no charging time.
Temperature setting:
A dial with 7 marked steps sits on top of the device. The steps correspond to temperatures from roughly 130 to 202 degrees Celsius. A thermometer on the unit shows the current device temperature, so you can track the heat-up process at any time.
Purely electromechanical:
Inside the device, a bimetal temperature controller cuts off the heater independently from the dial if the temperature rises too high. A second, independent bimetal switch acts as an additional safety mechanism. No chip, no processor -- the PLENTY runs on pure mechanics. That makes it exceptionally durable.
The auto shut-off kicks in once the set target temperature is reached. The heater turns off and only activates again when the temperature drops below the setpoint.
The Plenty desktop vaporizer
Heating System & Temperature
The PLENTY uses a patented hybrid heating system combining convection (hot air) and conduction (contact heat). The drawn-in air is heated at the heating element and flows through the material in the filling chamber, while the chamber walls simultaneously transfer heat to the material.
Temperature ranges:
Step 1-2 (~130-150 degrees Celsius): Light, flavor-rich vapor. Good for beginners.
Step 3-4 (~155-170 degrees Celsius): Moderate vapor production with solid flavor.
Step 5 (~180 degrees Celsius): Standard setting. Balanced ratio of vapor and taste.
At step 5 (around 180 degrees Celsius) heating takes roughly 4.5 minutes. That is noticeably slower than the Volcano Hybrid (40 seconds), but it comes down to the deliberately simple, electromechanical design with no power electronics.
The automatic shut-off activates after reaching the target temperature. The device cycles the heater on and off to maintain the set temperature.
Side view with temperature dial
Cooling Spiral & Inhalation
Between the filling chamber and the mouthpiece sits a stainless steel cooling spiral. The spiral cools the vapor on its way to the mouthpiece and delivers a smooth, comfortable draw.
Airflow:
The PLENTY allows airflow of up to 30 liters per minute, powered purely by lung draw. There is no pump -- vapor is drawn from the device solely by inhaling. Draw resistance is low, almost like breathing freely.
Tube pieces:
The package includes two tube pieces: one long, one short. Depending on preference, the longer piece offers more cooling distance, while the shorter one is more compact and direct.
Breathing technique:
Storz & Bickel recommends using only about half of your lung capacity. Inhale slowly and steadily, hold the vapor for a few seconds, then exhale slowly. Short, rushed draws are less effective and may cause coughing.
The stainless steel cooling coil of the Plenty
Filling Chamber
The filling chamber of the PLENTY is designed extra wide: with a volume of 3.4 cm3 and a capacity of about 600 mg, it offers significantly more space than the chambers of most portable vaporizers.
Material & construction:
The chamber is made of aluminum and shaped to create a large surface area. This ensures the plant material is evenly surrounded by hot air and heated through contact. Storz & Bickel describes the result as "strong draws and exceptional vapor production."
Filling chamber adapter:
For smaller amounts, a filling chamber adapter is available as a separate accessory. It reduces the usable volume and works well for single portions.
Dosing capsules:
The PLENTY is compatible with Storz & Bickel dosing capsules. These small aluminum capsules keep the chamber clean and allow quick material changes. The dosing capsules are stored and prepared in a separate capsule magazine.
Cleaning:
The filling chamber disassembles without tools. The screens (30 mm diameter) should be brushed with the included cleaning brush after each session. All removable parts can be soaked in isopropyl alcohol (max. 30 minutes) or cleaned in a dishwasher.
A look at the filling chamber of the Plenty
Using concentrates:
The PLENTY works with Liquid Pads from Storz & Bickel. Place the pad inside the filling chamber and spread the concentrate on top. This prevents the material from seeping through the screen and keeps the chamber clean.
Temperature step 5 to 6 (around 180-190 degrees Celsius) works well. Higher settings produce denser clouds, lower settings bring out more flavor. A set of 8 Liquid Pads costs about 10 euros from the S&B store.
Wear parts & replacement costs:
Screens (30 mm) — Normal Screen Set for about 6 euros. Replace when airflow drops or screens are permanently discolored.
Tube pieces — Replacement set around 10 euros. Swap when yellowed or the material feels brittle.
Sealing rings — A few euros each. Change when vapor escapes around the filling chamber.
Cooling spiral — Lasts a long time with regular cleaning. Only replace if physically damaged.
All replacement parts are available from the Storz & Bickel online store.
Dosing capsules, filling chamber adapter, and replacement screens are available as optional accessories directly from Storz & Bickel.
The complete scope of delivery
How Do I Clean and Maintain My Vaporizer?
Regular cleaning keeps the Plenty performing at its best and ensures pure flavor. Brush out the chamber after every session to remove loose residue. Clean the mouthpiece and vapor path weekly with isopropyl alcohol (90% or higher).
Cleaning Schedule
Component
Frequency
Method
Chamber
After each session
Brush, tap out
Mouthpiece
Weekly
ISO soak (15 min)
Vapor path/screen
Every 2 weeks
ISO soak, rinse
Exterior
As needed
Damp cloth
Common Mistakes to Avoid
Never use water inside the chamber — only isopropyl or dry cleaning
Do not use sharp metal tools in the vapor path
Replace screens when draw resistance increases
What Are the Ideal Temperature Settings?
Choosing the right temperature on the Plenty determines flavor, vapor density, and active compound profile. Lower temperatures (170–185 °C) emphasize terpenes and deliver mild, aromatic vapor. Higher temperatures (195–210 °C) produce thicker clouds and stronger effects.
Temperature Zones
Zone
Range
Result
Flavor
170–185 °C
Mild, aromatic, light vapor
Balanced
185–195 °C
Good flavor with visible vapor
Dense clouds
195–210 °C
Thick vapor, stronger effects
Practical Tips
Start at 180 °C and increase in 5-degree steps
Finer grind often needs 5–10 °C lower temperature
In cold environments, raise starting temp by 5 °C
Controls & Getting Started
Before switching on, inspect the power cord, plug and housing. Connect only a dry, undamaged device to a suitable grounded outlet. Fill the chamber and attach the cooling coil. Press the orange main switch and, if needed, the auto-off release handle. Select one of seven temperature levels with the dial; the manufacturer gives a range of approximately 130–202 °C. When the orange indicator light goes out, the target temperature has been reached. Inhale slowly and evenly. To finish, unplug the unit and let it cool completely. Do not touch hot filling-chamber parts. The PLENTY is a mains-powered handheld device and has no battery. Clean it only after cooling and disconnecting it from power; follow the manufacturer's operating instructions.
Product Comparisons6
Comparison: Plenty vs. Venty
Plenty
Venty
Type
Desktop
Portable
Heating
Hybrid
Hybrid
Temperature
130°C - 202°C
40°C - 210°C
Heat-up time
270s
20s
Battery
N/A (AC)
N/A
Price from
168.75€ · incl. shipping
295.98€ · Code VAPOCHECKER5 · incl. shipping
The Plenty suits users who prefer a desktop unit and appreciate a heat-up time of just 270 seconds. The Venty is the right pick for those who want a portable device and are comfortable with a 20-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Plenty vs. Mighty+
Plenty
Mighty+
Type
Desktop
Portable
Heating
Hybrid
Hybrid
Temperature
130°C - 202°C
40°C - 210°C
Heat-up time
270s
60s
Battery
N/A (AC)
3300 mAh (conflicting source values)
Price from
168.75€ · incl. shipping
234.06€ · Code VAPOCHECKER5 · incl. shipping
The Plenty suits users who prefer a desktop unit and appreciate a heat-up time of just 270 seconds. The Mighty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Plenty vs. Volcano Hybrid
Plenty
Volcano Hybrid
Type
Desktop
Desktop
Heating
Hybrid
Hybrid
Temperature
130°C - 202°C
40°C - 230°C
Heat-up time
270s
40s
Battery
N/A (AC)
N/A (AC)
Price from
168.75€ · incl. shipping
401.20€ · Code VAPOCHECKER5 · incl. shipping
The Plenty suits users who prefer a desktop unit and appreciate a heat-up time of just 270 seconds. The Volcano Hybrid is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Plenty vs. Volcano Classic
Plenty
Volcano Classic
Type
Desktop
Desktop
Heating
Hybrid
Convection
Temperature
130°C - 202°C
130°C - 230°C
Heat-up time
270s
300s
Battery
N/A (AC)
N/A (AC)
Price from
168.75€ · incl. shipping
292.64€ · Code VAPOCHECKER5 · incl. shipping
The Plenty suits users who prefer a desktop unit and appreciate a heat-up time of just 270 seconds. The Volcano Classic is the right pick for those who want a desktop unit and are comfortable with a 300-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Plenty vs. Crafty+
Plenty
Crafty+
Type
Desktop
Portable
Heating
Hybrid
Hybrid
Temperature
130°C - 202°C
40°C - 210°C
Heat-up time
270s
60s
Battery
N/A (AC)
N/A
Price from
168.75€ · incl. shipping
160.79€ · Code VAPOCHECKER5 · incl. shipping
The Plenty suits users who prefer a desktop unit and appreciate a heat-up time of just 270 seconds. The Crafty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Plenty vs. XQ2
Plenty
XQ2
Type
Desktop
Desktop
Heating
Hybrid
Convection
Temperature
130°C - 202°C
50°C - 260°C
Heat-up time
270s
90s
Battery
N/A (AC)
N/A (AC)
Price from
168.75€ · incl. shipping
160.30€ · Code VAPOCHECKER5 · incl. shipping
The Plenty by Storz & Bickel starts at 168.75€ incl. shipping and heats up in 270 seconds. The XQ2 by Arizer starts at 160.30€ Code VAPOCHECKER5 · incl. shipping with a 90-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.
Sort of. The PLENTY is a handheld device, but it must remain plugged into a power outlet via a fixed cable at all times. It is not wireless and not suited for use on the go. Compared to the Volcano models, though, it is significantly lighter and more compact at 700 grams.
Storz & Bickel deliberately designed the PLENTY as a purely electromechanical device. Instead of a display and microprocessor, a bimetal controller manages the temperature. This reduces potential failure points and makes the device exceptionally robust. The 7 steps on the dial cover a temperature range of roughly 130 to 202 degrees Celsius.
Yes. The PLENTY is compatible with Storz & Bickel dosing capsules. They are placed inside the filling chamber and keep it clean. For smaller amounts without a capsule, a filling chamber adapter is also available as a separate accessory.
The cooling spiral can be removed from the vaporization unit. The best approach is to soak it in isopropyl alcohol (maximum 30 minutes) and then rinse it for at least one minute under running water. All removable parts are also dishwasher safe. Do not soak plastic parts longer than 30 minutes in alcohol to avoid material damage.
No. The PLENTY runs exclusively on a fixed power cable. There is no rechargeable battery and no replaceable battery. That means it always needs to be plugged into an outlet, but it also never runs out of charge.
The biggest difference: the PLENTY is a handheld device with tube inhalation, while the Volcano models are desktop units with balloon filling (and tube option on the Hybrid). The PLENTY has no display, no app, no Bluetooth, and costs 248 euros -- significantly less than the Volcano Classic (398 euros) or Hybrid (598 euros). It heats up more slowly (4.5 min vs. 40 seconds on the Hybrid) but has the same filling chamber size and is also compatible with dosing capsules.
Sign-in runs through Google or Microsoft, which process data themselves in the process. We only receive your email address, your name and an account identifier, and store them to manage your account. We do not pass on your data for advertising purposes.
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
Storz & Bickel Plenty
Comments
No comments yet. Be the first!
Sign in to comment