Cannabis Hardware FlowerPot B0
Pros
- Up to 427 C, pure convection
- Made in the USA
- PID temperature control
- Maximum efficiency
Cons
- Home use only mains power
- 3-minute heat-up
- Not portable
Price Comparison (5 shops) 260–398 €
Last updated: 28/03/2026, 6:09 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Convection |
| Device Type | Ball Vape |
| Brand | Cannabis Hardware |
| Power Source | AC Power |
| Heat-up Time | 180 seconds |
| Weight | 142 g |
| Warranty | 1 years |
| Water Pipe | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
Source: OfficialOfficial, OfficialOfficial, OfficialOfficial · Verified 19.02.2026
About this vaporizer
The Cannabis Hardware FlowerPot B0 is a desktop e-nail convection system with PID control. The heating element reaches up to 427 C - from light convection at 180-200 C to full extraction above 380 C. Heat-up around 3 minutes.
Titanium bowl, heating coil ring, glass downstem - all parts made in the USA. Maximum efficiency without battery limits.
Ranked 78th for advanced home users who want desktop power with pure convection.
- Up to 427 C, pure convection
- Made in the USA
- PID temperature control
- Maximum efficiency
- Home use only mains power
- 3-minute heat-up
- Not portable
See also: FlowerPot B1 · FlowerPot B2 · VMAX Ball Vape · VMAX Injector Ball Vape
Concept and How It Works
The FlowerPot B0 follows the ball vape principle: a PID-controlled heater brings stainless steel balls up to temperature, and air flows through them during inhalation. The hot air passes through the herb material and produces dense convection vapor. Compared to the larger FlowerPot models, the B0 omits the SiC insert that provides extra thermal mass in the pricier variants. This makes the B0 slightly less heat-retentive but also cheaper and simpler to use. Heat-up time depends on the PID controller used and typically ranges from 3 to 5 minutes.
Build and Materials
The B0 consists of a heater head housing the stainless steel balls and a herb screen mounted below. Medical-grade stainless steel is used throughout. All air path components are free of harmful materials. Operation requires a separate PID controller and coil — the B0 is just the head itself. Cannabis Hardware offers complete kits, but many users already own a controller from another FlowerPot model. The modularity is a major advantage: you can swap heads without replacing the rest of the setup.
Vapor Quality and Performance
Ball vaporizers are known for thick, milky vapor clouds, and the B0 is no exception. The large surface area of the steel balls efficiently heats the incoming air. At temperatures around 210 to 230 degrees, the B0 delivers dense draws with strong flavor. Compared to the B1 or B2, vapor production is slightly lower because it lacks the extra thermal mass of the SiC insert. For most users the difference is marginal — especially with slower draws that give the balls time to reheat between pulls.
Who Should Consider the FlowerPot B0?
The B0 targets two groups: newcomers to ball vapes who want to test whether the concept suits them, and existing FlowerPot owners looking for a cheaper secondary head. Those who already have a PID controller and coil only need to buy the B0 head to get started. Users without existing accessories may find better value in a full kit with a B1 or B2. The B0 is also a good pick for anyone who wants a herb-only head without the concentrate capability of the higher-tier models.
FlowerPot B0 Setup Guide
The FlowerPot B0 sits atop a PID controller that maintains precise temperatures. Place the head on your glass piece, set the controller to 210-230 C, and wait 3-5 minutes for full heat soak. Load material into the bowl underneath and draw through the glass. The all-convection design extracts evenly without stirring. For concentrates, add a SiC dish on top and load your dab directly.
FlowerPot B0 Temperature Guide
Temperature matters more with the FlowerPot B0 than most vaporizers. At 190 C, expect thin but extremely flavorful vapor. At 210 C, the sweet spot for most users, clouds thicken while retaining good taste. At 230 C and above, extraction is nearly complete in a single draw — ideal for one-hit sessions through water. Allow 5 minutes of heat soak time after reaching target temperature for consistent results across the entire bowl.
Frequently Asked Questions
Yes, the B0 is just the head. A PID controller and heating coil are required separately. Cannabis Hardware also sells complete kits.
The B0 lacks the SiC insert that the B1 and B2 include for additional thermal mass. The B0 is therefore less heat-retentive but cheaper and simpler. The B1 and B2 can also handle concentrates.
The B0 is primarily designed for dry herbs. For concentrates, the B1 or B2 with their SiC inserts are better suited.
Soak the stainless steel balls and screen in isopropyl alcohol and scrub with a brush. Between sessions, simply tap out the herb screen.
Yes, all FlowerPot heads use the same connection system and are interchangeable across Cannabis Hardware PID controllers.
More Cannabis Hardware Vaporizers 4
Similar Vaporizers 6
Compatible Accessories
Other Accessories
15
Comments
No comments yet. Be the first!
Sign in to comment