Pros
- All-applewood build with fast heating and click-back.
- Great flavor reported by users.
- Simple design with available spare parts/accessories.
- Adjustable airflow and microdosing support.
Cons
- Slight charcoal/wood smell noted on Pure model.
- Mouthpiece can get hot; long glass mouthpiece recommended.
- Requires torch technique.
Price Comparison (6 shops)
Last updated: 03/03/2026, 12:45 PM
Specifications
| Heating Method | Hybrid |
| Device Type | Butane Vaporizer |
| Power Source | Butane |
| Heat-up Time | 8 seconds |
| Weight | 10 g |
| Dimensions | 6.2 x 4.0 x 4.0 cm |
| Warranty | 2 years |
| Dosing Capsules | View dosing capsules |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | none |
Source: NoWinhaleOfficial, OfficialOfficial, Vapman / NoWinhaleOfficial · Verified 20.02.2026
The Vapman Click Pure from Vapman is a handcrafted butane vaporizer made in Switzerland. Each piece is produced in small batches from wood and metal -- a one-of-a-kind among vaporizers. The heating works as a hybrid of flame and airflow, and operation is purely manual with no electronics. At just 20 grams, the Click Pure is one of the lightest vaporizers available.
With no battery built in, there is no concern about charge times or capacity loss. Heat-up with a jet flame lighter takes roughly 5 seconds -- on-demand in the truest sense. With 6 shops in the price comparison, the Click Pure is available for enthusiasts who value artisan quality and analog operation.
See also: Vapman Click Classic · Vapman Pure · Vapman 2.0 · Vapman Classic
Swiss Craftsmanship: Wood and Metal
Every Vapman Click Pure is handmade in Switzerland. The body is built from selected wood -- walnut, cherry, or other hardwoods depending on the series -- combined with precision-milled metal parts. The result is a device that feels premium and stands out visually from the crowd.
Small-batch production means each piece has slight variations in grain and tone. That is not a defect but part of the artisan philosophy. Metal surfaces are cleanly finished; wooden parts are oiled or waxed.
At just 20 grams, the Click Pure is barely heavier than a lighter. Its compact dimensions make it an ideal travel companion -- provided you carry a jet flame lighter.
Hybrid Flame Heating: Convection Meets Conduction
The Click Pure uses a hybrid heating principle: the jet flame heats a metal capsule from the outside (conduction), while hot air flows through the material when you draw (convection). Both mechanisms work simultaneously, producing surprisingly even extraction.
The technique is similar to using a DynaVap -- but without the typical click as a temperature signal. Instead, you learn over time to sense the right heating duration. Experienced users report very clean, flavor-rich vapor that competes with electric convection devices.
A major advantage of flame heating: there is no electronics, no battery, no heater element wear. As long as the lighter works, the Vapman works.
On-Demand Operation: 5-Second Heat-Up
The Vapman Click Pure is an on-demand vaporizer: heat up, take one or two draws, done. Heat-up with a good jet flame lighter takes about 5 seconds -- faster than any battery-powered device.
Unlike session vaporizers that maintain temperature for several minutes, the Click Pure cools immediately after heating. This saves material: you vaporize only what you need right now and save the rest for later.
For microdosing, this principle is ideal. A small bit of herb in the chamber, a quick heat, one draw -- done. Material consumption is noticeably lower than with session devices that have large chambers.
No Battery, No Electronics: Purely Analog
The Click Pure operates entirely without battery or electronics. No display, no LEDs, no chip-controlled temperature regulation -- temperature is controlled solely by how long you apply the flame. That sounds primitive but is a deliberate design choice.
Advantages of the analog concept: no battery means no degradation over the years, no charging, and no electronic waste. With proper care, the Vapman can theoretically last a lifetime. Wood and metal can be maintained and replaced if needed.
For users tired of electronic devices or looking for a backup vaporizer without a battery, the Click Pure is a surprisingly practical alternative. It works anywhere -- even far from any power outlet.
Price and Positioning: Niche Product for Enthusiasts
The Vapman Click Pure is not a mass-market product. It targets enthusiasts and collectors who appreciate artisan quality, natural materials, and analog operation. The price sits above comparable butane vaporizers -- that is the cost of handcraftsmanship.
| Device | Heating | Material | Weight |
|---|---|---|---|
| Vapman Click Pure | Hybrid/Butane | Wood + Metal | 20 g |
| DynaVap M | Hybrid/Butane | Stainless steel | 18 g |
| Sticky Brick Runt | Convection/Butane | Wood | 85 g |
With 6 shops in the price comparison, availability is good for a niche product. Anyone looking for a vaporizer that is not just functional but also a piece of craftsmanship will find exactly that in the Vapman Click Pure.
Comments
No comments yet. Be the first!
Sign in to comment