Arizer Solo 2 MAX

Hybrid heating with ceramic element: conduction through chamber walls plus convection through the herb bed. 50-220°C in 1-degree steps, heat-up in about 35 seconds.

The glass airpath remains Arizer's strength: borosilicate aroma tubes, no plastic in the vapor path. Flavor is clean and unaltered — especially at lower temperatures between 175 and 195°C where the full aroma profile shines.

Temperature Guide: Effects per Level

Improvements Over the Solo 2

The Solo 2 MAX heats up in about 25 seconds — roughly 5 seconds faster than its predecessor. The improved hybrid heating delivers more even convection while maintaining the same glass airpath purity. If you already own a Solo 2 and are happy with its performance, the MAX mainly adds comfort improvements: faster charging, longer runtime, and a more modern display.

Two aroma tubes included: standard and frosted. Both borosilicate glass, both fit water pipe adapters (14 mm and 18 mm sold separately).

Stainless steel dosing capsules included. They hold about 0.1 g and keep the chamber clean — practical for travel. Without capsules, the chamber fits 0.15-0.2 g.

Cleaning: soak aroma tube in isopropyl alcohol (90%+), brush out the chamber. Glass parts can be boiled in hot water.

Stem Compatibility

All Solo 2 glass stems fit the Solo 2 MAX — existing accessory collections carry over completely.

Dosing Capsules: Clean and Efficient

Stainless steel dosing capsules keep the chamber clean and allow micro-dosing at ~0.1 g. For travel: pre-fill capsules, carry them in the included container, and simply insert at your destination. The chamber stays nearly residue-free — weekly cleaning then focuses only on the stems.

LED display showing current and target temperature, battery level, and session timer. Controls via buttons on the device: temperature up/down, start session, save presets.

Up to 10 programmable session presets for different temperatures and durations. Auto shut-off after adjustable time (default: 15 minutes). No app, no Bluetooth.

Session Workflow with Timer

1. Fill the stem: 0.15–0.2 g medium grind, loosely packed.
2. Power on: Press button 5×. OLED shows heat-up phase (~25 s).
3. Set timer: Choose session duration between 5 and 15 minutes.
4. Inhale: Slow draws, haptic feedback confirms operation.
5. Increase temperature: After 3–5 draws, raise by 5–10 °C.

Setting Up Presets

The Solo 2 MAX offers 5 preset slots. Recommended configuration:

• Preset 1: 180 °C — Flavor, first draws
• Preset 2: 195 °C — Everyday session
• Preset 3: 210 °C — Intense, last draws
• Preset 4: 220 °C — Maximum, full extraction

An upgrade, not a redesign:

If you do not own a Solo yet, get the MAX. If you already have a Solo 2 and are happy with it, no need to upgrade — the core performance is identical.

Regular cleaning keeps the Solo 2 MAX performing at its best and ensures pure flavor. Brush out the chamber after every session to remove loose residue. Clean the mouthpiece and vapor path weekly with isopropyl alcohol (90% or higher).

Cleaning Schedule

Common Mistakes to Avoid

• Never use water inside the chamber — only isopropyl or dry cleaning
• Do not use sharp metal tools in the vapor path
• Replace screens when draw resistance increases

Choosing the right temperature on the Solo 2 MAX determines flavor, vapor density, and active compound profile. Lower temperatures (170–185 °C) emphasize terpenes and deliver mild, aromatic vapor. Higher temperatures (195–210 °C) produce thicker clouds and stronger effects.

Temperature Zones

Practical Tips

• Start at 180 °C and increase in 5-degree steps
• Finer grind often needs 5–10 °C lower temperature
• In cold environments, raise starting temp by 5 °C

The Solo 2 MAX battery lasts several sessions with typical use. For maximum lifespan, keep the battery between 20% and 80% and avoid deep discharge. USB-C charging with a quality power adapter speeds up charging.

Battery Tips

• Do not leave on the charger permanently — unplug after 100%
• For replaceable batteries: use original or recommended cells
• Battery performance drops in cold — let it warm up before sessions
• Pass-through charging (if supported) allows use while charging

Both Arizer portables with hybrid heating and glass vapor path. The Solo 3 V2 heats up in 15s (vs 30s), has 5000mAh battery and app control. The Solo 2 MAX is ~55 EUR cheaper.

Both Arizer portables with pure convection, glass stems and replaceable 18650 battery. The Solo 2 MAX has a bigger battery (3500mAh vs 2600mAh) and longer sessions. The ArGo is much more compact with its flat stem design and fits in any pocket.

• Solo 2 MAX — Official Product Page
• Arizer Accessories & Spare Parts

The ArGo uses a standard 18650 cell. Combined with its compact size it is ideal for multi-day trips – just pack spare batteries.

The ArGo uses replaceable glass tubes as vapor path and mouthpiece. Unlike silicone or plastic, glass delivers pure flavor. Four different tubes are included — straight and angled, in different lengths.

Besides the retractable glass tube, the ArGo is one of the most compact portables with a glass vapor path. It barely stands out in your pocket. Sessions last 5 minutes — then the device auto-shuts off.

The ArGo uses a standard 18650 cell with 3400 mAh. With 60-second heat-up and 5-minute sessions, you get 6-8 sessions per charge. A spare battery doubles the runtime — ideal for multi-day trips.

Soak glass tubes in isopropanol, clean the oven with the included brush. Replace the screen regularly. The ArGo is low-maintenance — 5 minutes per week is enough.

The ArGo is Arizer's most travel-friendly model, the Solo 3 V2 the performance model. The Solo 3 has USB-C, faster heat-up, and better battery — but the glass tube sticks out. If compactness is your top priority, go with the ArGo.

Regular cleaning keeps the ArGo performing at its best and ensures pure flavor. Brush out the chamber after every session to remove loose residue. Clean the mouthpiece and vapor path weekly with isopropyl alcohol (90% or higher).

Cleaning Schedule

Common Mistakes to Avoid

• Never use water inside the chamber — only isopropyl or dry cleaning
• Do not use sharp metal tools in the vapor path
• Replace screens when draw resistance increases

Choosing the right temperature on the ArGo determines flavor, vapor density, and active compound profile. Lower temperatures (170–185 °C) emphasize terpenes and deliver mild, aromatic vapor. Higher temperatures (195–210 °C) produce thicker clouds and stronger effects.

Temperature Zones

Practical Tips

• Start at 180 °C and increase in 5-degree steps
• Finer grind often needs 5–10 °C lower temperature
• In cold environments, raise starting temp by 5 °C

The ArGo battery lasts several sessions with typical use. For maximum lifespan, keep the battery between 20% and 80% and avoid deep discharge. USB-C charging with a quality power adapter speeds up charging.

Battery Tips

• Do not leave on the charger permanently — unplug after 100%
• For replaceable batteries: use original or recommended cells
• Battery performance drops in cold — let it warm up before sessions
• Pass-through charging (if supported) allows use while charging

Both Arizer portables with pure convection, glass stems and replaceable 18650 battery. The Solo 2 MAX has a bigger battery (3500mAh vs 2600mAh) and longer sessions. The ArGo is much more compact with its flat stem design and fits in any pocket.

• ArGo — Official Product Page
• Arizer Accessories & Spare Parts