Storz & Bickel Volcano Classic
Pros
- 40-230°C dial gives steady convection vapor.
- AC powered; no battery to babysit.
- 120 s heatup suits quick desktop sessions.
- 1,600 g base stays planted on the table.
- Water pipe compatible for cooler pulls.
Cons
- Big and not travel friendly at 1.6 kg.
- No app; only the analog temperature knob.
- No dosing capsules.
Price Comparison (53 shops)
Last updated: 03/03/2026, 2:38 AM
Specifications
| Heating Method | Convection |
| Device Type | Desktop |
| Power Source | AC Power |
| Temperature Range | 130°C - 230°C |
| Heat-up Time | 300 seconds |
| Weight | 1600 g |
| Dimensions | 20.0 x 18.0 x 20.0 cm cm |
| Dosing Capsules | View dosing capsules |
| Water Pipe | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Analog (Dial) |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
| MSRP | 456 € |
Source: OfficialOfficial, OfficialOfficial, OfficialOfficial · Verified 18.02.2026
The Volcano Classic is a desktop vaporizer by Storz & Bickel from Tuttlingen, Germany. On the market since 2000, it is regarded as one of the most durable and reliable vaporizers ever made. It uses pure convection heating and covers a temperature range of 130 to 230 degrees Celsius, adjustable via an analog dial with 9 marked positions.
The Classic is a purely electromechanical device with no digital electronics, no app, no Bluetooth, and no automatic shut-off. Controls are limited to a temperature dial and a rocker switch for the built-in pump. The package includes four EASY VALVE balloons, a filling chamber, an herb mill, and a cleaning kit. The recommended retail price is 398 euros.
See also: Venty · Volcano Hybrid · Crafty+ · Mighty+
Controls & Design
The Volcano Classic is a purely electromechanical device. There are no circuit boards, no software, no touchscreen. That is precisely what makes it so durable – what is not digital cannot crash or become obsolete.
Controls:
- Temperature dial – Stepless regulator with 9 numbered markings (approximately 130-230 degrees Celsius). The positions correspond to reference values, not exact degree readings.
- Heating LED – A green indicator light shows that the heater is active. It turns off when the set temperature is reached and lights up again during reheating.
- Pump rocker switch – Turns the built-in air pump on and off. Only needed for filling the balloon.
Design:
The iconic cone shape of the Volcano has remained virtually unchanged since 2000. The housing is made of heat-resistant plastic and stainless steel. The Classic weighs 1,600 grams with dimensions of 20.0 x 18.0 x 20.0 cm. The fixed power cable is attached directly to the device.
Available colors: Onyx (black), Silver, 25 Years Edition (anniversary model), and Evergreen (green).
Temperature & Heating System
The Volcano Classic uses pure convection. The built-in pump pushes air through the heating block, where it is heated to the set temperature. The hot air then flows through the filling chamber and extracts the active compounds from the plant material.
Temperature range:
The dial covers a range of approximately 130 to 230 degrees Celsius. The 9 markings on the scale are orientation values – there is no precise digital display. For beginners, position 5 to 6 is recommended, which corresponds to roughly 175 to 190 degrees Celsius.
Heat-up time:
At a medium setting (around 180 degrees Celsius), the Classic needs approximately 5 minutes to heat up. That is considerably longer than the Volcano Hybrid (40 seconds), but this is due to the purely analog heating technology without electronic regulation. The green LED turns off once the temperature is reached.
No auto shut-off: The Classic has no timer and does not turn off automatically. After use, the device must be manually disconnected from the power supply.
EASY VALVE Balloon System
The Volcano Classic works exclusively with the EASY VALVE balloon system. Unlike the Volcano Hybrid, there is no tube option – inhalation always happens through the balloon.
How it works:
- Grind plant material in the herb mill and place it in the filling chamber
- Place the filling chamber on the hot air generator and turn clockwise until it stops
- Set the temperature with the dial and wait until the green LED turns off
- Place the EASY VALVE balloon on the filling chamber
- Turn on the pump – hot air flows through the filling chamber into the balloon
- When the balloon is filled: turn off the pump, remove the balloon
- Press the mouthpiece into the valve and inhale slowly
Advantages of the balloon system:
- No draw resistance – The pump actively pushes vapor into the balloon. When inhaling from the balloon, resistance is practically zero.
- Mobility – The filled balloon can be detached from the device and moved freely. Inhalation is independent of the power source.
- Safety – You inhale from the detached balloon, not directly from the hot device.
Tip: Only fill the balloon with as much vapor as you will use within 10 minutes. Vapor condenses on the balloon wall after a few hours.
Using concentrates:
Storz & Bickel offers Liquid Pads for concentrates. The pad goes into the filling chamber, the concentrate is spread on top. Without the pad, the material would drip through the screens and foul the chamber.
Dial position 5 to 6 (roughly 175-190 degrees Celsius) works well. Fill the balloon as normal. Vapor production is a bit lower than with plant material, but the flavor comes through more intensely. A set of 8 Liquid Pads costs about 10 euros.
Technical Specifications
Technical specifications:
| Heating type | Pure convection |
| Temperature range | 130-230 degrees Celsius (dial, 9 steps) |
| Heat-up time | Approx. 5 minutes at 180 degrees Celsius |
| Inhalation method | Valve balloon (EASY VALVE, pump) |
| Airflow | Pump-driven, no draw resistance |
| Filling chamber | Aluminium, approx. 600 mg capacity |
| Weight | 1,600 g |
| Dimensions (H x W x D) | 20.0 x 18.0 x 20.0 cm |
| Power supply | Fixed power cable, 220-240 V / 50-60 Hz |
| Auto shut-off | None |
| Vibration alarm | No |
| App / Bluetooth | No |
| Colors | Onyx, Silver, 25 Years Edition, Evergreen |
| Warranty | 2 years + 1 year with registration |
| RRP | 398 euros |
| Manufacturer | Storz & Bickel GmbH, Tuttlingen, Germany |
What's in the Box
Included in the box:
- 1x VOLCANO CLASSIC (hot air generator)
- 4x EASY VALVE balloon with mouthpiece
- 1x EASY VALVE balloon with adapter
- 1x Filling chamber
- 3x Filling chamber clips
- 1x Cap ring
- 1x Normal screen set (diameter 30 mm)
- 1x Air filter set
- 1x Herb mill (diameter 59 mm)
- 1x Cleaning brush
- 1x Instructions for use
A filling chamber adapter for smaller amounts and Storz & Bickel dosing capsules are available separately.
Cleaning & Maintenance
The filling chamber of the Volcano Classic can be disassembled and cleaned in a few steps. All removable parts are dishwasher safe or can be soaked in isopropyl alcohol.
Regular cleaning:
- Screens – Brush off with the included cleaning brush after each use. For heavier buildup, soak in isopropyl alcohol (maximum 30 minutes).
- Filling chamber – Push the filling chamber cylinder upward out of the housing. Clean all parts with warm soapy water or in the dishwasher.
- Cap ring and screens – Pull off the cap ring, push out the screen with the brush handle. Soak in isopropyl alcohol, then rinse for at least one minute under running water.
Hot air generator:
Clean the hot air generator itself only with a dry or slightly damp cloth. Never immerse it in water. The air filter on the bottom should be checked for contamination every four weeks and replaced as needed. A set of replacement filters is included in the box.
Plastic parts: Do not soak in isopropyl alcohol for longer than 30 minutes to avoid discoloration or embrittlement.
Wear parts & replacement costs:
- EASY VALVE balloons — 5-pack around 30 euros. Replace when the balloon turns milky or gets sticky. Roughly every 50 to 100 fills depending on use.
- Screens (30 mm) — Normal Screen Set for about 6 euros. Swap when permanently clogged despite cleaning.
- Air filter — Included in the box. Check every 3 to 6 months, replace when dirty.
- Filling chamber clips — Hold the screen in place. Rarely break, inexpensive to replace if they do.
All parts are available from the Storz & Bickel online store. Overall, the Classic needs very few consumables — the balloons are the main recurring cost.
Comparison: Classic vs Hybrid vs Plenty
Storz & Bickel offers three stationary or handheld vaporizers. Here is a direct comparison of the key differences:
| Feature | Volcano Classic | Volcano Hybrid | Plenty |
|---|---|---|---|
| Category | Desktop | Desktop | Handheld |
| Temperature | 130-230 degrees Celsius | 40-230 degrees Celsius | ~130-202 degrees Celsius |
| Heating type | Full convection | Hybrid (conv.+cond.) | Hybrid (conv.+cond.) |
| Temperature control | Dial, 9 steps | Touch display + app | Dial, 7 steps |
| Heat-up time (180 degrees) | ~5 min | ~40 sec | ~4.5 min |
| Inhalation | Valve balloon (pump) | Balloon + tube | Tube (lung power) |
| Airflow | Pump, no draw resistance | Pump/tube 30 l/min | Up to 30 l/min (lungs) |
| Cooling | Balloon surface | Balloon/tube | Cooling coil |
| Auto shut-off | None | After 30 min | At target temp. |
| Vibration | None | Vibration alarm | None |
| Filling chamber | Aluminium, ~600 mg | Ceramic-coated, ~600 mg | Aluminium, ~600 mg |
| Power supply | Fixed power cable | IEC-60320 C7/C8 | Fixed power cable |
| App | None | Storz & Bickel app | None |
| Dimensions | 20x18x20 cm | 20x18x20 cm | 15.5x20x6 cm |
| Weight | 1,600 g | 1,800 g | 700 g |
| Warranty | 2+1 years | 2+1 years | 2 years |
| RRP | 398 euros | 598 euros | 248 euros |
The Classic is the more affordable choice for those who only want to use the balloon and can do without digital features. The Hybrid additionally offers a tube, a touch display, and app control. The Plenty is more compact and cheaper as a handheld device, but works without a pump and only with a tube.
Comparison: Volcano Classic vs. Volcano Hybrid
| Volcano Classic | Volcano Hybrid | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Convection | Hybrid (Conv. + Cond.) |
| Temperature | 230 °C | 230 °C |
| Heat-up time | 300s | 40s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 269€ | 396€ |
The Volcano Classic suits users who prefer a desktop unit and appreciate a heat-up time of just 300 seconds. The Volcano Hybrid is the right pick for those who want a desktop unit and are comfortable with a 40-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Volcano Classic vs. Venty
| Volcano Classic | Venty | |
|---|---|---|
| Type | Desktop | Portable |
| Heating | Convection | Hybrid (Conv. + Cond.) |
| Temperature | 230 °C | 210 °C |
| Heat-up time | 300s | 20s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 269€ | 285€ |
The Volcano Classic suits users who prefer a desktop unit and appreciate a heat-up time of just 300 seconds. The Venty is the right pick for those who want a portable device and are comfortable with a 20-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Volcano Classic vs. Crafty+
| Volcano Classic | Crafty+ | |
|---|---|---|
| Type | Desktop | Portable |
| Heating | Convection | Hybrid (Conv. + Cond.) |
| Temperature | 230 °C | 210 °C |
| Heat-up time | 300s | 60s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 269€ | 189€ |
The Volcano Classic suits users who prefer a desktop unit and appreciate a heat-up time of just 300 seconds. The Crafty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Volcano Classic vs. Mighty+
| Volcano Classic | Mighty+ | |
|---|---|---|
| Type | Desktop | Portable |
| Heating | Convection | Hybrid (Conv. + Cond.) |
| Temperature | 230 °C | 210 °C |
| Heat-up time | 300s | 60s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 269€ | 266€ |
The Volcano Classic suits users who prefer a desktop unit and appreciate a heat-up time of just 300 seconds. The Mighty+ is the right pick for those who want a portable device and are comfortable with a 60-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comparison: Volcano Classic vs. Plenty
| Volcano Classic | Plenty | |
|---|---|---|
| Type | Desktop | Desktop |
| Heating | Convection | Hybrid (Conv. + Cond.) |
| Temperature | 230 °C | 202 °C |
| Heat-up time | 300s | 270s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | 269€ | 155€ |
The Volcano Classic suits users who prefer a desktop unit and appreciate a heat-up time of just 300 seconds. The Plenty is the right pick for those who want a desktop unit and are comfortable with a 270-second heat-up time. Both devices come from Storz & Bickel and deliver excellent vapor quality.
Comments
No comments yet. Be the first!
Sign in to comment