Puffco Proxy (Original) — Desert

• First generation, published June 14, 2022
• Ceramic 3D Chamber with side heat traces, 4 settings 490/510/525/560 °F (manual)
• Battery 1350 mAh, around 15 heat cycles, USB-C charge in 1.5 hours
• Heat-up 30 seconds; Boost Mode adds 15 s and 18 °F
• Base 42 × 42 × 64.75 mm, glass 42 × 129.41 × 57.48 mm
• No app, no Bluetooth, not Core-compatible
• Warranty 1 year base, 1 month chamber

The original launched in June 2022 in black. Desert followed in February 2023, the Bloom edition in October 2023, the limited Flourish edition in February 2024 and Storm in dark blue in September 2024; from 2024 the kit shipped with the Joystick Cap instead of the Oculus carb cap. In September 2025 Puffco replaced the line with the second-generation Proxy: Bluetooth app, taller 3D Chamber, refined shape. Glass pieces are interchangeable between generations; the 3D Chambers are not. The Proxy Core Kit introduced in 2026 builds on the new base only.

The 3D Chamber is a ceramic bowl with heated walls; concentrate vaporizes from the sides rather than the floor. Four color-coded settings from blue to white are selected with a single click, a double click starts the heat cycle, and the device flashes and vibrates when ready. The manual lists 490 to 560 °F, the support page slightly higher values around 505 to 565 °F. Boost Mode extends the cycle by 15 seconds and raises the temperature by 18 °F. Puffco advises ten-minute cool-downs between cycles and no more than four consecutive heat-ups.

The built-in 1350 mAh battery delivers around 15 heat cycles according to Puffco; Boost use shortens that. Charging takes about 90 minutes over USB-C from a 5 V / 1.2 A supply, and a triple click shows the charge level via the LED color. Puffco does not document pass-through use for this generation. The battery is not replaceable, and charging below 32 °F or above 100 °F is prohibited. Puffco recommends a full charge before first use.

The base sits loosely in the hand-blown borosilicate pipe and can be moved without tools into other Proxy pieces: the Bub for water filtration, the Wizard with its spiral stem, the Ryan Fitt Recycler, the Travel Pipe or third-party glass. Puffco confirms that every Proxy base fits every Proxy glass piece, including the pieces introduced in 2025. For dry herb there was the Proxy Flower Bowl, now sold out at Puffco.

Wipe the chamber with a cotton swab after each use while warm; for residue, soak it in 90%+ isopropyl alcohol for 20 minutes and let it dry without rinsing in water. Never submerge the base; clean only the contacts and airpath with a dampened swab. Glass can be soaked and rinsed with water. Red-white flashing means a chamber contact error, three white flashes a missing chamber, five seconds of red an overheat.

Puffco grants the original Proxy base a one-year and the chamber a one-month limited warranty; glass, wear and misuse are excluded, and proof of purchase from an authorized dealer is required. The dedicated OG support page offers the Rev B manual, quick start guide and error code help. First-generation replacement chambers are still sold by Puffco. The receipt must show the product, price, date and merchant.

Today the original makes sense for collectors of the color editions and for anyone who wants a preset-only device without an app and finds remaining stock. If you want app control, the larger chamber or the glass-free Core attachment, you need the second-generation Proxy or the Proxy Core Kit. Weaknesses of the original: one-year warranty only, around 15 dabs per charge, no firmware upgrades.