CrossingTech Core 2.1
Price Comparison (9 shops) 101–185 €
Last updated: 23.03.2026, 07:09
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Heating Method | Conduzione |
| Device Type | Portatile |
| Brand | CrossingTech |
| Power Source | Batteria |
| Temperature Range | 205°C - 260°C |
| Heat-up Time | 13 seconds |
| Battery Capacity | 3150 mAh |
| Weight | 808 g |
| Warranty | 1 years |
| Water Pipe | Visualizza adattatori per bong |
| Session Mode | Sessione |
| Temperature Control | Preimpostazioni |
| Material | Concentrati |
| Vapor Path | Vetro |
| Battery Type | Interno |
| Replaceable Battery | No |
| Passthrough Charging | Yes |
| Charging Port | usb-c |
Fonte: OfficialUfficiale, OfficialUfficiale, TVapeRivenditore · Verificato 18.02.2026
Informazioni su questo vaporizzatore
The CrossingTech Core 2.1 is a Czech-made conduction portable with a stainless steel body, and the build quality is one of the first things you notice. CrossingTech is a smaller brand that has built a following among users who appreciate practical, well-constructed devices over flashy specs and brand recognition.
Stainless steel makes a difference for longevity. It resists the scratches and wear that plastic picks up over time, and it wipes clean easily. If you are the kind of person who keeps devices for years rather than upgrading regularly, the material choice here is meaningful.
The temperature range of 205°C to 260°C is narrow compared to many portables. That is deliberate. This range targets efficient extraction — the heat is in the zone where most of what you want to vaporise does so effectively, and the upper end at 260°C means you can push for a thorough extraction without worrying about combustion. Lower-temperature terp-focused sessions are not really what this device is designed for. It is optimised for getting the most out of your herb quickly and efficiently.
Thirteen seconds to temperature is fast for a conduction device. The standout specification is the 3150mAh battery, which is notably large for a device of this type. Extended battery life means more sessions between charges — and for a device without a passthrough limitation, that matters. Passthrough charging is supported, so you can also plug in and keep going if needed.
Water pipe compatibility rounds things out. Conduction vapour can run warm, and the cooling and filtration from a glass piece makes for a more comfortable experience. The combination of stainless build quality and water pipe compatibility makes the Core 2.1 a solid home device as much as a portable one.
One year of warranty is standard. If you value build materials, battery capacity, and efficiency over digital features, the CrossingTech Core 2.1 is worth a close look.
Der CrossingTech Core 2.1 von CrossingTech ist ein kompakter E-Rig für Konzentrate mit integriertem Wasserbubbler. Der 3150-mAh-Akku versorgt die Konduktionsheizung, die Temperaturen bis 260 °C erreicht. Das Gerät wiegt 808 g und eignet sich für den stationären Einsatz zu Hause.
Im Preisvergleich ist der Core 2.1 in 5 Shops erhältlich. Der integrierte Bubbler macht einen separaten Wasserpfeifen-Adapter überflüssig.
E-Rig-Konzept: Alles in einem Gerät
Der Core 2.1 kombiniert Heizelement, Bubbler und Akku in einem Gerät. Anders als klassische Dab-Rigs braucht man keinen separaten Torch, keinen Banger und kein externes Netzteil. Das reduziert den Aufwand und macht das Setup kompakter.
Der integrierte Glas-Bubbler filtert und kuehlt den Dampf durch Wasser. Das Ergebnis ist weicherer, kuehler Dampf ohne die Rauhheit, die bei Dry-Hits auftritt. Der Bubbler laesst sich zum Reinigen abnehmen.
Mit 808 g ist der Core 2.1 kein Taschengeraet, aber leicht genug für den Transport zwischen Raeumen oder zum Freundeskreis.
Konduktionsheizung und Temperaturkontrolle
Das Heizelement arbeitet per Konduktion und erreicht maximal 260 °C. Die Temperatur wird ueber Tasten am Gerät eingestellt. Mehrere Presets erlauben schnellen Wechsel zwischen niedrigen und hohen Temperaturen.
Niedrigere Temperaturen (ca. 180-220 °C) betonen den Geschmack, hoehere Stufen (240-260 °C) erzeugen dichtere Wolken. Fuer die meisten Konzentrate liegt der Sweet Spot bei etwa 220-240 °C.
Die Aufheizzeit ist kurz -- typisch für E-Rigs dieser Klasse. Passthrough-Laden wird unterstuetzt, sodass das Gerät am Ladekabel weiter genutzt werden kann.
Akku und Laufzeit
Der 3150-mAh-Akku ist fest verbaut. Die Kapazitaet reicht für zahlreiche Sessions an einem Abend. Passthrough-Laden bedeutet, dass auch bei niedrigem Akkustand weiter gedabbt werden kann.
Geladen wird ueber USB-C. Die Ladezeit betraegt bei leerem Akku etwa 2-3 Stunden. Fuer den stationaeren Einsatz zu Hause kann das Gerät dauerhaft am Kabel bleiben.
Bubbler und Wasserfiltration
Der integrierte Glas-Bubbler ist das Kernfeature des Core 2.1. Wasser filtert Partikel und kuehlt den Dampf, was den Rachenreiz deutlich reduziert. Die Wassermenge wird ueber eine Markierung am Bubbler angezeigt.
Der Bubbler laesst sich abnehmen und separat reinigen. Warmes Wasser und gelegentlich Isopropanol halten das Glas sauber. Ersatz-Bubbler sind erhaeltlich, falls das Glas einmal zu Bruch geht.
Preisvergleich: 5 Shops
Der CrossingTech Core 2.1 ist in 5 Shops im Preisvergleich verfuegbar. Die Preise variieren je nach Haendler und Zubehoerumfang. Ein Vergleich vor dem Kauf lohnt sich.
Alternativen in der E-Rig-Kategorie sind der Puffco Peak Pro (deutlich teurer) oder einfachere Wax-Pens ohne Wasserfiltration. Der Core 2.1 positioniert sich als preiswerter Mittelweg mit integriertem Bubbler.
Reinigung und Pflege
Der Atomizer des Core 2.1 laesst sich zum Reinigen herausnehmen. Isopropanol und ein Q-Tip reichen für die Basispflege. Nach 10-15 Sessions empfiehlt sich eine gruendlichere Reinigung, bei der man den Atomizer in Isopropanol einlegt.
Der Bubbler sollte nach jeder Sitzung mit Wasser durchgespuelt werden. Bei Kalkablagerungen hilft Essig oder Zitronensaeure. Die Dichtungen halten bei normaler Pflege 6-12 Monate.











Comments
No comments yet. Be the first!
Sign in to comment