Puffco Peak — Bliss

Puffco has sold the Peak under the same name since 2018, but completely redesigned it in July 2024. The original Peak (2018) heated via a ceramic atomizer with a ceramic bowl, charged via Micro-USB, delivered around 30 dabs per charge, and came with a one-year warranty. Puffco now refers to it as the "OG Peak"; the product page still showed it in June 2024, after which the redesign took over the same URL.

The Peak (2024) introduces, according to Puffco, the 3D Chamber, the included Joystick Cap, real-time temperature regulation, 35 dabs per charge, and USB-C. Retailers refer to it as the "New Peak", "Peak 2024", or "Peak V2" — it is always the same device. Not to be confused with: the Peak Pro, which is the more expensive sibling line featuring an app, Qi charging, and a 3DXL chamber.

Color variants (technically identical): At launch in July 2024 the Peak was available in Onyx, Sky, and Cloud. Puffco currently lists Onyx, Sapphire, and Zest.

The original Peak (Puffco: "OG Peak") was unveiled at CES on 8 January 2018 and sold from spring 2018 for USD 379.99; Puffco marketed it as the first smart e-rig. It has been discontinued — the product page last showed it in June 2024 for USD 199 — and it continues to circulate as old stock or second-hand. Puffco still sells the Peak Atomizer with ceramic bowl as a replacement part.

The glass attachments are cross-generation compatible, but the heating chambers are not: the 3D Chamber is, according to Puffco, not compatible with the OG Peak, and the Peak Atomizer is compatible only with it.

The centrepiece is the Peak 3D Chamber: a ceramic chamber with heating tracks embedded in its walls. The concentrate is vaporized from the sides rather than the base — according to Puffco this preserves terpenes and cannabinoids and produces more consistent draws. Sensors regulate the temperature in real time so that the selected setting remains constant throughout the cycle.

The chamber screws onto the base and can be removed for cleaning or replacement. It is a consumable part with a six-month warranty; replacements are available directly from Puffco, always with a black silicone sleeve (Onyx) that can be swapped on colored devices. Important for those switching from the original: the 3D Chamber does not fit the original Peak from 2018, and the original's atomizer does not fit the new device.

A single press of the one button cycles through the settings, with the LED color indicating the active one: Blue (Low, 254 °C) for maximum flavor with minimal vapor, Green (Med, 266 °C) as a compromise, Red (High, 277 °C) for more vapor, and White (Peak, 310 °C) for maximum vapor production. Precise degree-level adjustment is not available — for that, the Peak Pro with its app is required.

Two additional modes are described in the manual: Boost mode (double-click once the target temperature is reached) extends the cycle by 15 seconds and raises the temperature by 18 °F, repeatable as many times as desired. Intensity mode (five clicks) starts a more intense cycle and is intended for dry dabs without water in the glass. On the original Peak, the cycle extension was called "Sesh Mode".

Puffco states approximately 35 heating cycles per charge on the green setting; higher settings draw more power. The battery level can be checked with three clicks: green indicates 100–60 %, yellow 60–30 %, and red below 30 %. A small LED above the charging port lights red when only a few heating cycles remain — approximately five dabs, according to the manual.

Charging is via USB-C with a power adapter supplying 5 V and up to 2 A; according to Puffco, a flat battery is fully charged in approximately two hours. The light bar pulses whilst charging and switches off when the battery is full. The Li-Ion battery is built in and cannot be replaced by the user. Puffco does not state whether the device can be used whilst charging (passthrough).

The device is operated entirely via a single button: press and hold for three seconds to switch on or off, one click changes the heat setting, a double-click starts the heating cycle, and holding aborts it. The light pulses whilst heating; once the temperature is reached, the device blinks and vibrates twice. Puffco recommends drawing gently whilst rotating the Joystick Cap.

Error codes according to the manual: four white flashes means "no chamber detected" (the support FAQ states three white flashes), alternating red and white means "chamber error, clean the chamber", five seconds of red means "device overheated", and three red flashes means "battery empty". Operation and charging are rated for 0 to 38 °C.

The Peak comes with the Peak Glass 2.0: two hand-blown borosilicate chambers with two rows of laser-cut percolation holes at the base. To fill, remove the attachment and pour water through the mouthpiece until it just covers the holes; the lower section must remain dry, otherwise water can enter the base. The glass locks in at the front over the chamber and is pressed into the base at the rear.

Puffco emphasizes compatibility with all glass attachments for the Peak and Peak Pro — including the Peak Pro Travel Glass and the Ryan Fitt Recycler Glass 2.0. Those who wish to use the device without water can use Intensity mode for dry dabs.

Puffco recommends wiping the still-warm 3D Chamber with a cotton swab in a circular motion after each use. For deep cleaning, the Joystick with sleeve and tether is removed, the chamber is unscrewed and soaked in isopropyl alcohol (at least 90 %) for 20 minutes — afterwards it must dry completely in the air and must not be rinsed with water. Puffco recommends 99 % isopropyl alcohol as the best solution, as weaker concentrations contain more water.

The glass is also soaked in isopropyl alcohol for 20 minutes, then rinsed thoroughly with water and dried. On the base, the thread block and airpath are cleaned only with a dampened cotton swab; water must never enter the base. As a general rule, Puffco recommends a thorough clean at every full battery discharge, as well as an isopropyl soak of the chamber as soon as it becomes flooded or the device responds with rainbow light.

According to Puffco, the box contains: Peak base, Peak Glass 2.0, 3D Chamber, Joystick Cap, dab tool, cotton swabs, a USB-C cable, and a Quick Start Guide. A power adapter is not included — unlike the original Peak with its Supercharger — nor is a carry case.

Puffco offers the following accessories: replacement 3D Chambers (including Joystick Cap), the Peak Glass, the Peak Pro Travel Glass, the Ryan Fitt Recycler Glass 2.0, the Hot Knife as a USB-C-rechargeable heated dab tool, and the Puffco Travel Case. The Peak Atomizer from the 2018 model is not compatible; wireless charging is supported only on the Peak Pro.

Puffco provides two years warranty on the Peak (2024) electronic base and six months on the 3D Chamber; glass, wear parts, and accidental damage are excluded. For comparison, the original Peak had one year on the base and one month on the atomizer.

The warranty applies only to purchases made through Puffco or authorised retailers — Puffco explicitly excludes purchases via marketplaces such as Amazon, eBay, or Walmart.com. To make a claim, proof of purchase and an RMA number from support are required; a removed or illegible serial number and opening the base void the warranty. The support page offers a Quick Start Guide, the manual as a PDF in six languages (including German), as well as cleaning and error code guidance.

The Peak suits users looking for a desktop e-rig with water filtration and the simplest possible operation, and who can do without app profiles. Puffco's own comparison table positions it between the compact Pivot (no water, approximately 15 rather than 35 heating cycles per charge) and the Peak Pro 3DXL (app, Qi charging, extra-large chamber). Those who prefer very large loads or want precise degree-by-degree control should opt for the Peak Pro; those wanting a pocket-sized device should choose the Pivot.

The Peak is not designed for dry herb — Puffco describes it as a smart e-rig for concentrates such as rosin, resin, budder, or shatter. Puffco also offers the Proxy as a modular concentrate device.

Strengths: The 3D Chamber with real-time temperature control shares the same technical foundation as the Peak Pro; 35 cycles per charge and USB-C represent a clear improvement over the 2018 model; two-year warranty; compatible with the entire glass ecosystem of the Peak and Peak Pro; single-button operation with no learning curve.

Weaknesses: No app, no Bluetooth, no precise degree-by-degree temperature control; no wireless charging; the chamber is a consumable part with only six months warranty; power adapter and carry case are not included in the box; Puffco publishes neither battery capacity nor weight — buyers must rely on retailer tests for this information.

• Puffco Peak — Official Product Page
• Puffco Peak Support (FAQ, Warranty, Cleaning)
• Peak Instruction Manual 2024 (PDF, multilingual)
• Peak Quick Start Guide (PDF)
• Puffco Device Comparison
• Puffco Warranty Policy