Pros
- 93 g, slim and pocketable.
- Heats in 15 s.
- 180-215 C range for quick sessions.
- 3500 mAh battery lasts well.
- App control for profiles.
Cons
- No water pipe support.
- Conduction only.
- No dosing caps.
Price Comparison (25 shops)
Last updated: 03/03/2026, 3:44 AM
Specifications
| Heating Method | Conduction |
| Device Type | Portable |
| Power Source | Battery |
| Temperature Range | 180°C - 215°C |
| Heat-up Time | 22 seconds |
| Battery Capacity | 3500 mAh |
| Weight | 93 g |
| Warranty | 10 years |
| App Control | Yes |
| Session Mode | Session |
| Temperature Control | Presets |
| Material | Dry Herb & Concentrates |
| Vapor Path | Metal |
| Battery Type | Internal |
| Replaceable Battery | No |
| Passthrough Charging | Yes |
| Charging Port | proprietary |
| Status | Discontinued |
Source: OfficialOfficial, OfficialOfficial, 420VapeZoneReview, Vaporizer WizardReview · Verified 24.02.2026
The PAX 3 by PAX is one of the most popular portable conduction vaporizers worldwide. Four preset temperature levels, app control, and a slim brushed aluminum body have made it a dependable daily driver. The 3,500 mAh battery lasts about 90 minutes, heat-up takes roughly 20 seconds. Check the price comparison — the PAX 3 starts at around €99.
See also: PAX Mini · PAX Flow · PAX Mini 2
Design & Handling
At only 93 g, the PAX 3 slips into any pocket without a bulge. The anodized aluminum shell feels solid and comes in several colors. One button on top handles everything — short press to power on/off, hold to cycle temperatures.
The mouthpiece sits flush with the body and pops up to reveal the chamber for filling. A built-in motion sensor detects when the device is in use and dials back the heater during breaks. That saves battery and herb. The four LED petals on the front show temperature level and remaining charge.
With the optional concentrate insert, the PAX 3 handles waxes and oils too. The standard oven lid holds a full chamber (~0.3 g), while the half-pack lid works well for smaller loads.
App & Temperature Control
The PAX app (Bluetooth) gives you precise temperature control from 175 to 215 °C. Without the app, four presets are available: 182, 193, 204, and 215 °C. That covers the useful range well — from flavor-focused draws to thick clouds.
The app also offers three draw modes: Standard, Boost, and Efficiency. Boost reheats faster for stronger hits. Efficiency lowers the temp between draws to stretch each session. You can also see the exact battery percentage and change LED colors.
Not interested in the app? The four presets and single-button operation work perfectly fine on their own.
Vapor Quality
The PAX 3 uses pure conduction. The stainless steel chamber heats directly, and the herb releases vapor steadily through each draw. Flavor is clean and pleasant — not as aromatic as convection devices, but solid for a conduction vaporizer.
Fine grind and firm pack improve results noticeably. Low temps deliver light, tasty draws. Above 200 °C, vapor gets thicker and more noticeable. A full chamber lasts 8-10 draws on average.
Quick tip: clean the screen regularly. A clogged screen increases draw resistance and hurts flavor.
Cleaning & Maintenance
After each session, let the chamber cool and brush it out with the included tool. For a deeper clean, remove the mouthpiece and screen, soak them in isopropyl alcohol, and wipe the chamber with a damp cotton swab.
PAX recommends cleaning every 3-5 sessions. In practice, a weekly deep clean works if you keep the screen clear between sessions. Residue in the chamber affects taste and increases draw resistance.
Replacement screens and mouthpieces are cheap and widely available. Keep the PAX 3 clean and its aluminum body will outlast most other portables on the market.
App Features & Concentrate Insert
The PAX app (now web-based at web.pax.com) gives you fine-grained temperature control and access to extra modes like Efficiency, Stealth, and Boost. Efficiency mode gradually raises the temperature throughout a session to extract every last bit. Stealth mode dims the LED lights and lowers the device temperature when not in use.
The PAX 3 also ships with a concentrate insert — a small metal chamber that sits inside the oven. Drop a rice-grain-sized piece of wax or rosin into it, set the temperature above 200°C, and the device handles concentrates without any extra accessories.
PAX 3 vs. PAX Plus
The PAX Plus is the direct successor to the PAX 3. What changed? The Plus has an improved heating system (faster, more even extraction), the same Bluetooth app, but a revised surface. Both have 22-second heat-up and 215 °C max.
Prices are close: PAX 3 from €99, PAX Plus from €93. Pick whichever is cheaper — differences are minor.
Cleaning and Mouthpieces
Remove the mouthpiece, push through the vapor path with the included tool, brush out the chamber. 99% isopropanol on a pipe cleaner dissolves residue in seconds. Replace screens regularly.
The PAX 3 has two mouthpieces: flat (discreet) and raised (cooler vapor). Both magnetically attached.
Warranty and Durability
PAX offers a 10-year warranty on the PAX 3 — one of the longest in the industry. Defects within warranty are replaced free of charge. The aluminum housing is robust but sensitive to drops on hard floors.
Comparison: PAX 3 vs. Venty
| PAX 3 | Venty | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Hybrid (Conv. + Cond.) |
| Temperature | 215 °C | 210 °C |
| Heat-up time | 22s | 20s |
| Battery | 3500 mAh | N/A (AC) |
| Price from | 0€ | 1€ |
The PAX 3 by PAX starts at 0€ and heats up in 22 seconds. The Venty by Storz & Bickel starts at 1€ with a 20-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.
Comparison: PAX 3 vs. Air MAX
| PAX 3 | Air MAX | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Hybrid (Conv. + Cond.) |
| Temperature | 215 °C | 220 °C |
| Heat-up time | 22s | 60s |
| Battery | 3500 mAh | 5000 mAh |
| Price from | 0€ | 0€ |
The PAX 3 by PAX starts at 0€ and heats up in 22 seconds. The Air MAX by Arizer starts at 0€ with a 60-second heat-up time. Both devices use different heating methods and suit demanding users in this price range.
Comparison: PAX 3 vs. PAX Mini
| PAX 3 | PAX Mini | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Conduction |
| Temperature | 215 °C | 215 °C |
| Heat-up time | 22s | 22s |
| Battery | 3500 mAh | 3000 mAh |
| Price from | 0€ | 0€ |
The PAX 3 suits users who prefer a portable device and appreciate a heat-up time of just 22 seconds. The PAX Mini is the right pick for those who want a portable device and are comfortable with a 22-second heat-up time. Both devices come from PAX and deliver excellent vapor quality.
Comparison: PAX 3 vs. PAX Flow
| PAX 3 | PAX Flow | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Hybrid (Conv. + Cond.) |
| Temperature | 215 °C | 225 °C |
| Heat-up time | 22s | 35s |
| Battery | 3500 mAh | N/A (AC) |
| Price from | 0€ | 0€ |
The PAX 3 suits users who prefer a portable device and appreciate a heat-up time of just 22 seconds. The PAX Flow is the right pick for those who want a portable device and are comfortable with a 35-second heat-up time. Both devices come from PAX and deliver excellent vapor quality.
Comparison: PAX 3 vs. PAX Plus
| PAX 3 | PAX Plus | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Conduction |
| Temperature | 215 °C | 215 °C |
| Heat-up time | 22s | 22s |
| Battery | 3500 mAh | 3300 mAh |
| Price from | 0€ | 0€ |
The PAX 3 suits users who prefer a portable device and appreciate a heat-up time of just 22 seconds. The PAX Plus is the right pick for those who want a portable device and are comfortable with a 22-second heat-up time. Both devices come from PAX and deliver excellent vapor quality.
Comments
No comments yet. Be the first!
Sign in to comment