Pros
- 100% PEEK airpath for pure, clean vapor taste
- Removable 21700 battery (5000 mAh) u2013 no planned obsolescence
- Tool-less modular construction for easy maintenance and repair
- 200 mm+ cooling pathways keep vapor smooth at any airflow
- Adjustable airflow from 0u201325 l/min via mouthpiece rotation
Cons
- Only available at a handful of European shops
- Boutique manufacturer with a smaller dealer network than market leaders
- Premium price point compared to mass-market portables
Price Comparison (16 shops)
Last updated: 03/03/2026, 5:24 AM
Specifications
| Heating Method | Hybrid |
| Device Type | Portable |
| Power Source | Battery |
| Heat-up Time | 5 seconds |
| Battery Capacity | 5000 mAh |
| Weight | 245 g |
| Dimensions | 105x63x24 cm |
| Power Consumption | 120 W |
| Airflow | 0.0 - 25.0 l/min |
| Warranty | 2 years |
| Dosing Capsules | View dosing capsules |
| Water Pipe | View water pipe adapters |
| Session Mode | Session & On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Isolated |
| Battery Type | 21700 Li-Ion |
| Replaceable Battery | Yes |
| Passthrough Charging | Yes |
| Charging Port | usb-c |
Source: MagicVaporizersAggregator · Verified 19.02.2026
The Limelight Frolic Thermal Extractor is a CNC-machined portable vaporizer by Butternut Doo from Jagodina, Serbia – a team that has been working on vaporizer technology since 2013. Rather than injection molding, Limelight relies on precision single-part machining: an anodized aluminum housing, a 120W CTS heater, and a fully isolated airpath made from PEEK high-performance polymer.
A 0.96-inch color OLED display shows temperature, mode, and battery level. Two operating modes – Session (40–220 °C) and On-Demand (40–240 °C) – cover both longer sessions and quick single hits. A swappable 21700 battery, tool-free modular construction, and 200+ mm of cooling length make the Frolic a device for users who care about material quality and easy maintenance. The MSRP is $399; European prices typically land between €299 and €379.
CTS Heating System: 120 Watts for Fast, Even Extraction
The Frolic uses a Ceramic Transfer Surface (CTS) heater rated at 120 watts. This heating method works primarily by conduction: the material sits directly on the heated ceramic surface, while airflow adds convection.
The Frolic offers two operating modes: In Session mode (40–220 °C) the device maintains the selected temperature over a longer period. In On-Demand mode (40–240 °C) it heats only while drawing, reaching higher temperatures for more intense extraction. A 0.96-inch color OLED display shows temperature, mode, battery level, and session timer. Haptic feedback (vibration) signals when the device is ready, backed by an LED indicator (orange = heating, green = ready).
| Spec | Value |
|---|---|
| Heater Power | 120 W |
| Heating Method | CTS (Conduction + Convection) |
| Heat-up Time | < 10 seconds |
| Session Mode | 40–220 °C |
| On-Demand Mode | 40–240 °C |
| Display | 0.96″ Color OLED |
PEEK Airpath: Why the Material Matters
PEEK (Polyether Ether Ketone) is a high-performance polymer used in medical devices and aerospace. It withstands temperatures above 300u00b0C, produces no off-gassing, and is flavor-neutral.
In the Frolic, the entire vapor path u2013 from the heating chamber to the mouthpiece u2013 is made from PEEK. The vapor never touches metal or silicone on its way to your mouth. Combined with 200 mm+ of cooling length, this produces cool, clean vapor at any airflow setting.
- Heat-resistant to 300u00b0C+
- No off-gassing or flavor contamination
- Medical and aerospace certified
- Easy to clean (isopropyl alcohol)
Modular Design: Tool-Free Construction
The Frolic can be fully disassembled without tools. Every part – mouthpiece, cooling unit, oven, battery – can be removed, cleaned, or replaced individually.
For users this means: if a part breaks, you replace it – not the whole device. That is a deliberate contrast to the usual disposable electronics.
Oven material: The heating chamber is made from 6000-series aluminum with a hard-anodized non-stick coating. Oven capacity is approximately 0.25 g. The housing combines anodized aluminum with Ultem (PEI) and PEEK high-performance polymers for heat-critical areas.
Dosing capsules: The cooling unit is compatible with Crafty/Mighty-style dosing capsules. This makes pre-packing easy and keeps the oven clean.
Airflow control: Draw resistance is infinitely adjustable from 0 to 25 l/min by rotating the mouthpiece. This lets you switch between a restrictive micro-draw and an open direct-lung hit.
21700 Battery: Swappable and Future-Proof
The Frolic runs on a standard 21700 battery with 5000 mAh capacity. It pops out without tools and swaps for a fresh cell in seconds while on the go.
Advantages over built-in batteries:
- No capacity loss after 2u20133 years u2013 just insert a new cell
- Replacement cells cost around u20ac5u201310
- Passthrough charging supported (USB-C)
- No e-waste when the battery ages
What’s in the Box
Package contents:
| Item | Qty |
|---|---|
| Frolic Thermal Extractor | 1 |
| Flat Mouthpiece (pre-installed) | 1 |
| Cooling Unit | 1 |
| WPA 14 mm Adapter | 1 |
| WPA 18 mm Adapter | 1 |
| USB-C Charging Cable | 1 |
| Stir Tool (Debowler) | 1 |
| Cleaning Brush | 1 |
| Cooler Screen | 1 |
| Oven Screen | 1 |
| Mesh Disks (fine + coarse) | 10 |
| Silicone O-Ring Set | 1 |
| Quick Start Guide | 1 |
The Angled Mouthpiece and Direct Output Adapter are sold separately.
Cleaning & Maintenance
The tool-free design means you can strip the Frolic down and clean it in a few minutes.
Cleaning steps:
- Remove mouthpiece and cooling unit
- Take out mesh disks from the oven
- Soak PEEK parts in isopropyl alcohol (90%+) for 15–30 minutes
- Wipe the oven with an ISO-soaked cotton swab
- Let everything dry, then reassemble
Wear parts:
- Mesh Disks: swap every 2–4 weeks
- O-Rings: replace when draw resistance drops
- Cooling Unit: clean regularly, no replacement needed
Warning: Never submerge the electronics or battery in any liquid.
Accessories Overview
Limelight sells 11 official accessories for the Frolic. Thanks to the modular design, each part can be replaced individually – no need to replace the entire device.
| Name | Type | Description |
|---|---|---|
| Flat Mouthpiece | Mouthpiece | Standard flat mouthpiece (included) |
| Angled Mouthpiece | Mouthpiece | Angled tip for ergonomic draw |
| WPA 14 mm | WPA | Water pipe adapter for 14 mm joints |
| WPA 18 mm | WPA | Water pipe adapter for 18 mm joints |
| Cooling Unit | Cooling | Replacement cooling unit with PEEK path |
| Direct Output Adapter | Adapter | Short adapter without cooling for max flavor |
| Mesh Disk Set | Screens | 5 fine + 5 coarse mesh disks |
| Silicone O-Ring Set | Seals | Replacement O-rings for mouthpiece and cooling unit |
| Oven O-Ring Set | Seals | 5 oven O-rings |
| Direct Output O-Ring Set | Seals | O-rings for the DOA |
| Stir Tool | Tool | Stirring stick for oven material |
Comparison: Frolic vs. Tinymight 2 vs. Crafty+
Three popular portable vaporizers side by side:
| Feature | Frolic | Tinymight 2 | Crafty+ |
|---|---|---|---|
| Heating | Hybrid (CTS) | Convection (on-demand) | Hybrid (S&B) |
| Temperature | 40–240 °C | Stepless (dial) | 40–210 °C (app) |
| Heat-up | < 10 s | ~ 5 s | ~ 60 s |
| Battery | 21700, swappable | 18650, swappable | Built-in |
| Vapor path | PEEK (isolated) | Borosilicate glass | Plastic |
| Airflow | 0–25 l/min | Adjustable | Fixed |
| Warranty | 2 years | 5 years | 2 yr (3 w/ reg.) |
| MSRP | $399 | €349 | €279 |
Which one is right for you?
- Frolic: For users who want a modular, repairable vaporizer with an isolated PEEK vapor path and CNC build quality.
- Tinymight 2: For those who prefer an ultra-light on-demand device with a glass path, 5-year warranty, and quick single hits.
- Crafty+: For anyone who values app control, an established brand, and the lowest entry price of the three.
Full comparison: Our Frolic vs. Tinymight 2 article breaks down vapor quality, battery life, cleaning, and daily usability of both devices in detail.
Technical Specifications
| Specification | Value |
|---|---|
| Heating Method | Hybrid |
| Temperature Range | 40–240 °C |
| Heatup Time | ~5 sec |
| Battery | 5,000 mAh |
| Weight | 245 g |
| Warranty | 1-Year Manufacturer Warranty |
| Water Pipe | Yes |
| Dosing Capsules | Yes |
| Passthrough Charging | Yes |
| Replaceable Battery | Yes |
| App Control | No |
Comparison: VENTY vs Tinymight 2 vs Frolic
| VENTY | Tinymight 2 | Frolic | |
|---|---|---|---|
| Category | Portable | Portable | Portable |
| Manufacturer | Storz & Bickel | Tinymight | Limelight Vapes |
| Heating | Hybrid (Convection + Conduction) | Pure Convection | Hybrid (Convection + Conduction) |
| Temperature range | 40–210 °C | 120–240 °C | 180–230 °C |
| Temperature control | Digital display + Web App (1 °C steps) | Dial (stepless) | Dial (stepless) |
| Heat-up time | ~20 seconds | ~3 seconds | ~5 seconds |
| Battery | 5940 mAh (USB-C) | 2800 mAh (18650) | 5000 mAh (21700) |
| Battery replaceable | No | Yes (18650) | Yes (21700) |
| Weight | 252 g | 207 g | 245 g |
| Dimensions | 15.7 × 5.5 × 3.7 cm | 80 × 56 mm | 105 × 63 × 24 mm |
| Session type | Session | On-Demand + Session | On-Demand + Session |
| App | Web App (Bluetooth) | No | No |
| Passthrough charging | Yes | Yes | Yes |
| Dosing capsules | Yes (adapter) | No | Yes (compatible) |
| Water pipe compatible | Yes (adapter) | Yes (14mm native) | Yes (adapter) |
| Vibration | Yes (adjustable) | No | No |
| Warranty | 2+1 years | 2 years | 1 year |
| RRP | 349 € | 349 € | 349 € |
Comments
No comments yet. Be the first!
Sign in to comment