CrossingTech Thermal Twist Injector

Q: Which DynaVap models fit the Thermal Twist Injector?

All DynaVap models with the standard 10 mm tip (M, Omni, VonG). Optional glass inserts are available for non-standard tip sizes.

Q: Does the Twist Injector need butane?

No. The Twist Injector is fully electric and runs on a mains power supply. No butane required.

Q: How is temperature controlled?

By dwell time in the glass tube. Shorter = lower temperature, longer = higher temperature. The DynaVap click signals vaporization temperature.

Q: Is the vapor path all glass?

Yes. The hot zone is borosilicate glass and ceramic. No metal or plastic in the vapor path.

Q: How long does heat-up take?

Typically 15-25 seconds depending on desired intensity. Slower than a torch, but more even.

Q: Can the Twist Injector be used on the go?

No. It is a desktop device with a mains power supply -- designed for stationary tabletop use only.

CrossingTech

Best Price

150,00

€

Available at 3 shops

My Alerts

Get notified for free when the price drops

7.0/10 Vapochecker Score

Pros

Thermal mass heating reaches up to 370 °C — great for concentrates
PID controller with per-degree temperature control
Affordable entry point into CrossingTech's Twist series
14.4 mm and 18.8 mm glass joints for broad bong compatibility
Sturdy stainless-steel and titanium build

Cons

No ruby balls — less heat retention than Ruby models
Available from only a few European retailers
Mains power required, no battery

Price Comparison (3 shops)

Show international shops Customs & import VAT may apply

FR La Vaporisterie

150,00€

→

FR Docteur Vaporisateur

154,90€

→

GB Recommended Vape Supplies

157,91€ (£138)

→

Last updated: 03/03/2026, 5:27 AM

Waiting for a better deal? — We'll notify you.

Specifications

Heating Method	Convection
Device Type	Desktop
Power Source	Plug-in
Temperature Range	104°C - 532°C
Heat-up Time	45 seconds
Auto Shutoff	120 min
Water Pipe	View water pipe adapters
Session Mode	On-Demand
Temperature Control	Digital
Material	Stainless steel, Titanium, Borosilicate glass
Vapor Path	Glass
Replaceable Battery	No
Passthrough Charging	No

Source: INeedHemp (Divine Tribe)Retailer, INeedHemp (Divine Tribe)Retailer · Verified 18.02.2026

The Thermal Twist Injector from Thermal is a glass desktop injector designed specifically for DynaVap devices. Instead of a torch or induction, an electric element heats the DynaVap tip through a glass receptacle -- butane-free and even. Heat-up takes around 20 seconds, and temperature is controlled by dwell time.

Thermal specializes in glass injectors for DynaVap caps. With 3 shops in the price comparison, finding the best deal is straightforward.

How It Works: Glass Injector Instead of a Torch

The Twist Injector replaces the butane torch in the DynaVap workflow. The DynaVap tip slides into a glass receptacle surrounded by an electric heating element. Rotating the DynaVap inside the glass tube produces even heating of the cap -- until the familiar click sounds.

Unlike an induction heater that magnetically heats the cap itself, the Twist Injector transfers radiant heat through the glass wall. The result is a gentler heat-up with fewer hot spots. Users report more consistent vapor compared to a torch.

The twist motion is what gives the product its name: you rotate the DynaVap during heating to warm all sides of the cap evenly. Without rotation, one side may overheat while the other stays cool.

Construction and Materials

The Twist Injector is built from borosilicate glass and a ceramic heating element. The vapor path touches only glass -- no metals, no plastic in the hot zone. The unit stands on a stable base and is designed for stationary tabletop use.

The glass tube has an inner diameter matched to the 10 mm DynaVap tip. Standard DynaVap models (M, Omni, VonG) fit without adapters. For tips with non-standard diameters, optional glass inserts are available.

Power comes from an external power supply. An on/off switch on the base activates the heating element. Power draw is in the range of typical desktop vaporizers. As a tabletop device, the Twist Injector is not designed for portable use.

Operation and Temperature Control

Temperature on the Twist Injector is not set digitally but controlled by dwell time in the glass tube. The longer the DynaVap stays in the heated glass, the higher the temperature. The DynaVap click signals that vaporization temperature has been reached.

For lower temperatures: remove the DynaVap right after the first click. For fuller extraction: wait 2-3 seconds past the click before removing. This technique takes some practice but offers finer control than a torch once mastered.

An advantage over induction heaters: the process is silent -- no humming, no buzzing from an induction coil. Only the subtle DynaVap cap click is audible. Typical heat-up time is 15-25 seconds depending on desired intensity.

3 Shops in the Price Comparison

The Thermal Twist Injector is listed in 3 shops on vapochecker.com. As a niche product for DynaVap users, the price sits in the mid range of desktop heating solutions.

DynaVap heating method comparison:

Method	Heat-up Time	Power Source	Evenness
Torch	5-10 s	Butane	Variable
Induction Heater	8-12 s	Battery/Mains	Good
Twist Injector	15-25 s	Mains	Very good

Anyone looking to use DynaVap without butane while keeping a pure glass vapor path will find the Twist Injector a well-crafted alternative. The price comparison across 3 shops reveals the best deal.