XMAX V4 Pro: Microdosing

Best Price
111.17
Available at TVape Canada
My Alerts
Get notified for free when the price drops

Pros

  • Replaceable 18650 battery
  • Session and on-demand modes
  • 100–220 °C on the product page
  • Typically about 10 seconds heat-up (no more than 20)
  • OLED display

Cons

  • TopGreen lists conflicting battery capacities (2,550/2,600 mAh)
  • No reliable manufacturer data on weight and warranty duration
  • Requires unprotected flat-top 18650 cells — careful battery handling needed

Microdosing for the XMAX V4 Pro. You can find the complete overview on the main page.

Back to the XMAX V4 Pro main page

Microdosing

Microdosing is a core practical topic for the XMAX V4 Pro. Build a stable baseline with fixed temperature and airflow, adjust one variable per session, and keep short notes to find a reproducible setup.

Check draw rhythm, chamber fill, and cleaning intervals in a regular routine. Most quality gains come from consistency, not from extreme settings.

  • Start with one repeatable profile.
  • Change only one parameter at a time.
  • Track taste, vapor density, and session duration.
  • Clean cooling path, screens, and seals regularly.
← Back to Overview
What is the XMAX V4 Pro? +

The XMAX V4 Pro is a portable convection vaporizer for dry herbs from XMAX (Topgreen Technology). It offers an OLED display, a replaceable 18650 battery, three-stage airflow, a full-glass vapour path and a temperature range from ≤ 220 °C in 1° increments.

Which heating method does the V4 Pro use? +

Pure convection. Hot air flows through the herbs without the material directly touching the heating element. This produces a clearer, more terpene-focused flavour than conduction or hybrid heating — the latter also heat the material via wall contact.

How quickly does the V4 Pro heat up? +

In Session mode, it reaches the target temperature in around ≈ 10 seconds. That is not the fastest heat-up time on the market — Tinymight 2 or Sticky Brick need around 3 seconds — but for OLED-controlled pure convection with 1° increments, it is a good figure. In On-Demand mode, vapour production begins after a few seconds of pressing the button.

Can I replace the battery? +

Yes, the V4 Pro uses a standard 18650 battery (2,550/2,600 mAh (manufacturer pages conflict)) in a flat-top design without protection circuit. The battery can be removed in seconds via a screw-cap cover at the bottom end of the device and swapped for a fresh one. Recommended models: Samsung 25R, Sony VTC6 or Molicel P26A. Replacement batteries cost about 6 to 12 Euro.

Does the V4 Pro support dosing capsules? +

Yes, the V4 Pro is compatible with standard dosing capsules. The capsules fit directly into the chamber and hold around 0.1 to 0.15 g of plant material. They make filling on the go much easier and reduce cleaning effort, as plant-material residues remain in the capsule and not in the chamber.

Can I use the V4 Pro with a water pipe? +

Yes. The magnetic glass mouthpiece is a native 14-mm water-pipe adapter and fits directly into 14-mm bong joints. With a 14-to-18-mm reducer, 18-mm connections also work. Water filtration cools the vapour down further and delivers smoother draws, especially at higher temperatures.

Where can I find the cheapest price? +

In our XMAX V4 Pro price comparison, prices from [vc_shop_count slug="xmax-v4-pro"] Shops are updated daily. The span is typically between 55 and 175 Euro depending on shop and variant. This way, you always find the current best offer.

What is the difference between V3 Pro and V4 Pro? +

The V3 Pro uses hybrid heating with a ceramic vapour path, while the V4 Pro uses pure convection with a full-glass vapour path. The V4 Pro heats faster (11 instead of 15 seconds), has OLED in 1° increments, a magnetic glass mouthpiece with native WPA and dosing-capsule support. The V3 Pro has 2 instead of 1 year warranty and is slightly lighter (107 g vs not published by the manufacturer). Detailed comparison: XMAX V3 Pro vs V4 Pro.

What does the 3-stage airflow provide? +

Three draw-resistance stages from tight to open vary the ratio of vapour density to vapour volume. A tight setting emphasises flavour with small vapour volume and concentrated clouds. An open setting delivers larger clouds with lighter draw resistance and suits higher temperatures or water-filter setups. This allows the draw style to be adjusted individually.

How large is the herb chamber? +

The chamber holds around 0.1 to 0.15 g. For optimal convection, it should be filled loosely so that air can flow through evenly. Packing too tightly restricts airflow and reduces vapour output. Use a medium grind, ideally with a four-piece grinder.

V4 Pro vs Crafty+: when is the surcharge for the Crafty+ worth it? +

At the lowest price, the Crafty+ costs about twice as much and offers hybrid heating with app control as well as 2 instead of 1 year warranty. If app boost mode, brand heritage from Tuttlingen and a longer manufacturer warranty are important to you, and you accept the significantly longer 60-second heat-up time, the surcharge is worth it. If pure convection with a clearer flavour profile, faster heat-up time and a replaceable battery are more important to you, the V4 Pro is the rational choice.

How safe is replacing the 18650 battery on the V4 Pro? +

If you follow simple rules, replacement is safe: always transport the battery in a battery case (no direct contact with coins or keys in your pocket), buy only branded cells from Samsung, Sony or Molicel, and do not use batteries with damaged wrapping. The device itself has a protection circuit; that is also why “unprotected” flat-top batteries are the right choice (protected batteries are too long). Fake batteries from unclear sources carry a real risk — so buy only from authorised dealers.

Comments

No comments yet. Be the first!

Price Alert: XMAX V4 Pro

Currently from 111.17€
Currently from 111.17€ — max. 110.17€

You will receive a confirmation email.

Loading...
Scroll to Top