Tinymight 2 vs Mighty+: On-Demand versus Session

This comparison brings together two vaporisers that could hardly be more different. The Tinymight 2, a Finnish one-man project with pure convection and a 3-second heat-up time. The Mighty+, the German industrial classic from Storz & Bickel with hybrid heating and app control. Both cost over 250 EUR, both are in the top 5 of every best-of list. And both have a loyal fan base that swears their device is better.

Who is right? Neither — and both. Because the answer depends on how you vape.

Price trend

Two philosophies, briefly explained

Before we get into the details, it helps to understand what fundamentally sets these devices apart:

The Mighty+ is a session vaporiser. You switch it on, wait 60 seconds, and then vape for 10-15 minutes until the chamber is empty. Similar to a cigarette — you smoke it in one go. The hybrid heating (convection + conduction) keeps the material at a constant temperature.

The Tinymight 2 can do both: on-demand and session. In on-demand mode, it only heats when you draw — reaching temperature in 3 seconds. One draw, done. Another draw five minutes later. The material stays cool between draws. The pure convection (hot air only, no contact) makes this possible.

That sounds like a clear advantage for the Tinymight 2. It is — but it comes at a price.

The differences in detail

Heat-up time: 3 seconds vs 60 seconds

The Tinymight 2 heats up in 3 seconds. That is not a typo. You press the button, inhale — and there is vapor. The Mighty+ needs 60 seconds. In the vaporiser world, that is the difference between an instant camera and analogue photography.

In everyday use, that means: the Tinymight 2 is suitable for spontaneous single draws. Step outside briefly, take one draw, come back. The Mighty+ requires a conscious decision — you switch it on because you are planning a full session.

Heating: convection vs hybrid

The Tinymight 2 uses pure convection. Hot air flows through the material without touching it directly. This delivers intense flavour, especially in the first few draws. The terpenes really come through. Disadvantage: extraction is less even — the material at the edge is sometimes heated more than in the centre. Stirring helps.

The Mighty+ works with hybrid heating (convection + conduction). The material is heated simultaneously by hot air and the warm chamber wall. Result: very even extraction without stirring. The flavour is less explosive than with the Tinymight, but more consistent throughout the entire session.

In short: Tinymight 2 = intense flavour, needs technique. Mighty+ = consistent flavour, foolproof.

Temperature range: 240°C vs 210°C

The Tinymight 2 goes up to 240°C — that is unusually high for a portable vaporiser. At these temperatures, cannabinoids that only vaporise later are also extracted. The Mighty+ stops at 210°C. For most users that is completely sufficient, but people who want maximum extraction will hit the limit with the Mighty+.

Battery: replaceable vs fixed

The Tinymight 2 uses a replaceable 18650 battery (3300 mAh). Battery empty? Put in a new one and carry on. In 5 seconds. When travelling, you simply pack a spare battery. And after two years, when the battery weakens, you buy a new one for 5 EUR instead of a new vaporiser.

The Mighty+ has a built-in 3200 mAh battery. Larger, yes — but not replaceable. When the battery loses capacity after 2-3 years, things get complicated. In return, the Mighty+ offers pass-through charging — you can use it while it charges. The Tinymight 2 can do that too.

App and operation

The Mighty+ has a Bluetooth app for precise temperature settings in 1°C increments, boost mode and firmware updates. Some users love the app, others never use it.

The Tinymight 2 has no app. The temperature is set via a dial — stepless, analogue, without a smartphone. That is a matter of taste: purist or limiting, depending on your point of view.

Dosing capsules

The Mighty+ is fully compatible with Storz & Bickel dosing capsules. Fill them beforehand, insert them on the go, keep things clean — an established system that works perfectly.

The Tinymight 2 offers no official dosing capsule solution. There are third-party capsules, but they are less widespread and not as elegant as the S&B system.

Build quality and origin

The Mighty+ comes from a factory in Tuttlingen with ISO certification, quality control and medical approval. Every device is identical. Customer service, spare parts, warranty — everything is professional.

The Tinymight 2 is made by Tomas in Finland in small batches. Handmade, high quality, but in smaller quantities. Waiting times can be long, and customer service is a one-man operation. In return, you get a device with character that stands out from mass-produced goods.

Comparison table

Who is which one right for?

The Tinymight 2 is right for you if you…

• Want to vape on demand. One draw here, one draw there — without having to plan a whole session. That is the Tinymight 2’s biggest advantage.
• Prioritise flavour. Pure convection delivers the most intense aromas, especially in on-demand mode.
• Need a replaceable battery. Take out the 18650 cell, put in a new one. Unlimited battery life on the go, cost-effective battery care in the long term.
• Use high temperatures. 240°C opens up extraction ranges that the Mighty+ does not reach.
• Are looking for something special. A Finnish niche product with soul instead of a mass-market item.

The Mighty+ is right for you if you…

• Put reliability above everything else. The Mighty+ simply works. Always. No learning curve, no surprises.
• Use dosing capsules. The S&B capsule system is unmatched in convenience — especially on the go.
• Want an app. Precise temperature control by smartphone, boost mode, firmware updates.
• Prefer sessions. Switch it on, wait, vape for 15 minutes. Relaxed, consistent, predictable.
• Value the support of a large manufacturer. Storz & Bickel has a repair department, spare parts and real customer service.

How much do Tinymight 2 and Mighty+ currently cost?

Surprisingly, both are priced quite close together — around 270 EUR. The Tinymight 2 is available at fewer shops (approx. 65 shops vs 146 for the Mighty+), which is why prices vary less.

187
153

Conclusion: Two champions, zero losers

The Tinymight 2 is the vaporiser for people who know what they want. On-demand in 3 seconds, replaceable battery, pure convection flavour — but without an app, without dosing capsules, and with a learning curve. It rewards enthusiasts who are willing to get to grips with it.

The Mighty+ is the vaporiser for everyone else. It does nothing wrong, works straight out of the box and delivers consistently good vapor. Dosing capsules, app, the reputation of Storz & Bickel — the overall package adds up.

Both deserve their place in the top 3. The right choice does not depend on quality — but on your vaping style.