Sticky Brick Runt Vaporizer - Best Price from €120

Name: Sticky Brick Runt
Brand: Sticky Brick
Availability: InStock

* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.

Specifications
Heating Method	Convection
Device Type	Butane Vaporizer
Brand	Sticky Brick
Power Source	Butane
Heat-up Time	3 seconds
Weight	200 g
Dimensions	7.7 x 7.7 x 3.0 cm
Warranty	99 years
Session Mode	On-Demand
Temperature Control	Manual
Material	Dry Herb
Vapor Path	Glass
Replaceable Battery	No
Passthrough Charging	No
Charging Port	none

About this vaporizer

Sticky Brick Runt is a flame-powered convection block built by Sticky Brick Labs in the USA. Its hardwood chassis routes fresh air through a glass intake, so the flame never contacts the herbs yet can reach about 230 °C with only a three-second pull. There is no battery or warm-up curve—just instant heat as soon as you aim the torch.

Magnets hold the intake, carb and mouthpiece together, making it easy to stir the glass bowl or drop in stainless dosing capsules for travel. The Runt's short vapor path concentrates flavor, and the direct draw mouthpiece keeps the footprint tiny even though it still pairs well with j-hooks or simple whips.

Pick the Runt when you want desktop-level density but prefer the ritual of a jet lighter. You do need a single or dual-flame torch and a steady hand to regulate distance from the intake, because there is no WPA included and overheating can happen if you hover too close. Master the rhythm and it rewards you with instant, terpy macro hits.

Pros

Torch-powered convection hits in about three seconds
Magnetic intake makes stirring and maintenance simple
Works with stainless dosing capsules for tidy travel
Tiny hardwood body delivers desktop-thick vapor

Cons

Always requires a jet lighter
No included water pipe adapter
Manual torch control has a learning curve

The Sticky Brick Runt from Sticky Brick Labs is the smallest member of the Sticky Brick family. A handmade hardwood vaporizer with pure convection heating via butane flame. It is ready to use in just 3 seconds – on demand, with no waiting time. The maximum temperature is around 230 °C, and the weight is approximately 200 g. Dosing capsules are supported. You can find the current price in the Sticky Brick Runt price comparison.

See also: Flip Brick · OG Brick · Sticky Brick Maxx · Sticky Brick Twist

Pure convection principle with butane flame

The Runt uses a butane flame directed through a glass intake into the herb chamber. The flame does not touch the herb – only the hot air does. This creates pure convection and a clean, flavour-intense vapour. The technique requires a bit of practice: the angle and distance of the flame determine the temperature. Once you get the hang of it, the Runt delivers dense clouds in a matter of seconds.

Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95 % of the desired active compounds, while combustion by-products are largely avoided. Source: PubMed 16637053

Handcrafted from hardwood

Each Sticky Brick is made in the USA from hardwood. Walnut, cherry or oak – depending on the batch available. The workmanship is visibly solid: fit, grain and feel make the Runt a practical item with character. Unlike glass vaporizers, it can survive the occasional drop.

3-second heat-up time – true on-demand use

Where electronic devices take 10 to 30 seconds, the Runt is ready immediately. Flame in, inhale, done. Nothing happens between draws – no power consumption, no material loss. For users who prefer individual draws instead of long sessions, this is ideal. The herb chamber holds enough for 2 to 4 strong draws.

Compact and robust

At 200 g and with a compact footprint, the Runt is the most portable Sticky Brick. It fits in a jacket pocket, even if it is not as slim as a pen vaporizer. The only glass component is the flame intake – replacement parts are available at low cost. The wooden body is practically indestructible under normal use.

Cleaning and accessories

The glass parts can be cleaned with isopropanol, while the wooden surface can be wiped with a dry cloth. A screen in the herb chamber should be replaced regularly. Dosing capsules from Sticky Brick Labs fit and make dosing easier. Some users also use the Runt with water filtration via adapters – but the standard version does not have a WPA connection.

Butane convection

The Runt from Sticky Brick uses a jet flame torch to draw hot air through the material -- pure convection without direct contact with the flame. The herb material is heated only by the hot air, not by a surface. The result: clean, aromatic vapour.

Temperature control is achieved through the flame distance and heat-up time. Experienced users can hit the sweet spot within seconds. At around 230 °C maximum operating temperature, the range extends from light flavour draws to dense clouds. The Runt is also more compact than its bigger brother, the Sticky Brick OG.

Wood craftsmanship

Each Runt is made from solid hardwood. Sticky Brick uses various wood types -- from walnut to cherry. Every piece has its own grain and colouring. That makes each Runt unique.

The craftsmanship is visible in the precise drillings for the air path and the smooth surface. The wood feels warm in the hand and does not heat up like metal. The glass components (intake and mouthpiece) can be removed for cleaning. The wood itself only needs the occasional wipe-down.

Frequently Asked Questions

How does the Sticky Brick Runt work? +

A butane flame is aimed through the glass intake towards the herb chamber. The hot air vaporises the herb by convection. The flame does not touch the material directly.

How quickly does the Runt heat up? +

About 3 seconds. You hold the flame to the glass intake while inhaling at the same time – the vapour arrives immediately.

Do I need special lighters? +

Yes, a butane pocket lighter with a directed flame (jet flame) is recommended. Standard lighters do not work well because the flame is too broad.

Can I use dosing capsules? +

Yes, Sticky Brick Labs offers compatible dosing capsules. They make dosing easier and keep the herb chamber clean.

What wood is the Runt made from? +

Various hardwoods depending on the batch – typically walnut, cherry or oak. Every piece has a unique grain.

Can I connect the Runt to a bong? +

The standard version does not have a WPA connection. However, there are third-party adapters that enable water filtration.

Is the Runt suitable for beginners? +

The technique requires a bit of practice. Beginners should start with a lower flame and work their way up slowly. After a few sessions, the technique clicks.

How do I clean the Sticky Brick Runt? +

Soak the glass parts in isopropanol, and wipe the wood with a dry cloth. Replace the screens regularly.