Sticky Brick OG Brick
Pros
- High-quality wooden craftsmanship with solid construction
- Convection heating principle delivers efficient heat distribution
- Water pipe compatible (14mm joint) for enhanced ergonomics
- Supports dosing capsules for measured sessions
- Completely electronic-free design requires no batteries
- Manual temperature control via flame distance for experienced users
- Timeless aesthetic, durable collector's piece
Cons
- Requires butane lighter – constant fuel sourcing needed
- Steep learning curve for beginners with manual temperature control
- No click system like DynaVap – requires skill and experience
- Wooden material sensitive to moisture and storage conditions
- Heavier than modern portable devices
Sticky Brick OG Brick — Price Comparison (13 shops) 154–187 €
Last updated: 02/05/2026, 10:38 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
The OG Brick by Sticky Brick is a butane-powered convection vaporizer. Heat-up time is 3 seconds. Currently from 153.80 EUR across 5 shops (as of May 2, 2026).
Specifications
| Specifications | |
|---|---|
| Heating Method | Convection |
| Device Type | Butane Vaporizer |
| Brand | Sticky Brick |
| Power Source | Butane |
| Heat-up Time | 3 seconds |
| Weight | 360 g |
| Dimensions | 9.5 x 9.5 x 4.5 cm |
| Warranty | 99 years |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Glass |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | none |
Source: OfficialOfficial, OfficialOfficial, La Centrale VapeurRetailer, VapospyAggregator · Verified 20.02.2026
About this vaporizer
The Sticky Brick OG is a classic butane vaporizer with a wooden body and convective heating principle. The distance from the flame controls the temperature, giving users full control. In contrast to DynaVap, the Sticky Brick does not have a click system - the temperature control is purely manual.
- High-quality wooden craftsmanship with solid construction
- Convection heating principle delivers efficient heat distribution
- Water pipe compatible (14mm joint) for enhanced ergonomics
- Supports dosing capsules for measured sessions
- Completely electronic-free design requires no batteries
- Manual temperature control via flame distance for experienced users
- Timeless aesthetic, durable collector's piece
- Requires butane lighter – constant fuel sourcing needed
- Steep learning curve for beginners with manual temperature control
- No click system like DynaVap – requires skill and experience
- Wooden material sensitive to moisture and storage conditions
- Heavier than modern portable devices
The Sticky Brick OG from Sticky Brick Labs is a butane-powered on-demand vaporizer made from handcrafted hardwood with a glass air path. Unlike electric devices, the flame of a jet lighter is directed through a glass intake, guiding the hot air over the material -- pure convection, instant heat, no battery. The device is handcrafted in the USA.
In the price comparison, the Sticky Brick OG is listed at 5 shops.
See also: Flip Brick · Sticky Brick Runt · Sticky Brick Maxx · Sticky Brick Twist
Butane convection: on-demand without electronics
The Sticky Brick OG uses butane convection. A jet lighter is briefly held at the glass intake -- the flame heats the air, not the material directly. This hot air flows over the herb chamber and vaporises the contents as needed.
The result: instant heat with no heat-up time. No preheating phase, no waiting. A short draw of 3-5 seconds is enough for dense vapour. Temperature control is handled via flame size and draw duration -- this takes a bit of practice, but once familiar it offers precise control.
Because there are no electronics inside, there is no battery to run flat, no circuit board to fail, and no software that needs updates. The only consumable is butane gas for the lighter.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95 % of the desired active compounds, while combustion by-products are largely avoided. Source: PubMed 16637053
Handcrafted hardwood: materials and workmanship
Each Sticky Brick OG is made in the USA from solid hardwood -- typically walnut, cherry, or oak. The wood grain makes every piece unique. The glass air path and glass intake are made from heat-resistant borosilicate glass.
The wood is not just for looks: it insulates the heat, feels pleasant in the hand, and is durable. The fit and finish of the parts -- lid, chamber, mouthpiece -- is solid craftsmanship.
Compared with the plastic or metal housings of electronic vaporizers, wood offers a completely different tactile experience. Anyone who values natural materials will find in the Sticky Brick OG a device that stands out from the crowd.
Glass air path: pure flavour without compromise
The entire air path of the Sticky Brick OG is made from borosilicate glass. From the intake through the chamber to the mouthpiece, the air comes into contact only with glass and the material -- no metals, no plastic in the vapour path.
Glass is flavour-neutral, chemically inert, and easy to clean. For purists who care about flavour purity, this is a strong argument. Metal parts can add a taste of their own at high temperatures; glass does not.
The glass parts are, however, fragile. Replacement glass is available from specialist shops. A carry case protects the device on the go -- the OG is designed more for home use than for a trouser pocket.
Draw technique: learning curve and mastery
The Sticky Brick OG has a learning curve. Flame angle, draw strength, and draw duration must be balanced against one another. Too much flame or too long a draw will combust the material; too little produces hardly any vapour.
Typical settings for beginners: set the flame to a medium size, hold the lighter around 1-2 cm above the glass intake, and draw steadily for 3-5 seconds. With practice, the process becomes intuitive.
The reward: experienced users report denser, more flavourful vapour than with many electronic devices. The direct control over the heat allows fine tuning that no electronic device can offer.
Price comparison and alternatives: 5 shops
The Sticky Brick OG sits in the mid to upper price range. In return, you get a handcrafted wooden device with a glass air path that can last for decades with proper care. In our price comparison, 5 shops are listed.
Comparison with other butane vaporizers:
| Device | Material | Heating | Type |
|---|---|---|---|
| Sticky Brick OG | Hardwood/Glass | Butane convection | On-demand |
| DynaVap M Plus | Stainless steel | Butane conduction | On-demand |
| Sticky Brick Junior | Hardwood/Glass | Butane convection | On-demand (compact) |
If you want an electronics-free device with a pure glass air path and artisanal quality, the OG offers a rare combination.
Comments
No comments yet. Be the first!
Sign in to comment