QaromaShop Taroma 360
QaromaShop Taroma 360 is a ball vape. VapoChecker compares current offers from €360.26 (plus shipping) across 1 shop (as of Oct 21, 2026).Price basis: Item price excluding shipping and coupons
Pros
- Grade 2 titanium housing with over 200 ruby beads (3 mm)
- Operating range 191–254 °C (375–490 °F) with manufacturer chart for temperature and dwell time
- Adjustable screen depth in the glass stem, for large and small loads
- Complete kit with PID controller, 20 mm coil, glass stem for 14 and 18 mm, and quartz dish for concentrates
Cons
- No warranty and no returns; only shipping damage reported within 24 hours is covered
- Multi-step operation: attach the housing, wait for the required dwell time, then draw the residual heat through the stem
- Ash catcher with a carb hole or pass-through bowl recommended, but not included in the set
QaromaShop Taroma 360 — Price Comparison (1 shop) 360.26 €–517.68 €
The Taroma 360 by QaromaShop is a desktop hybrid vaporizer. Temperature range spans 191 to 254 degrees Celsius. Currently from 378.12 € across 1 shop (as of Oct 20, 2026; incl. shipping).
Specifications
| Heating Method | Hybrid |
| Device Type | Ball Vape |
| Brand | QaromaShop |
| Power Source | AC Power |
| Temperature Range | 191°C - 254°C |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Charging Port | Mains power (AC) |
Specification sources: qaromashop.com / products/taroma-360-aromatherapy-device-diy-kitManufacturer (Recorded source check: 11.10.2026), qaromashop.com / legal/refund-policyManufacturer (Recorded source check: 11.10.2026)
About this vaporizer
QaromaShop Taroma 360 is a ball vape head with a Grade 2 titanium housing that, according to the manufacturer, combines conduction and convection (“Hybrid 360 Tech”). The housing slides over a glass stem with a screen, contains more than 200 ruby pearls measuring 3 mm, and is heated by a 150 W heater coil connected to the PID controller. QaromaShop specifies an operating range of 191 to 254 °C (375–490 °F).
Compatible Accessories
Water Pipe Adapters
1
Induction Heaters
7
Replacement Parts
2
Other Accessories
1
QaromaShop specifies 191 to 254 °C (375–490 °F). Compare prices in the Taroma 360 price comparison.
See also: Taroma Lite Plus · Taroma 3.0 · Qaroma XL · Qaroma
Construction and materials
According to QaromaShop, the Taroma 360 housing is made of Grade 2 titanium. Its “Gemstone Chamber” contains more than 200 ruby beads measuring 3 mm. It slides over a glass stem whose thin walls and large surface area combine convection and conduction according to the manufacturer (“Hybrid 360 Tech”).
The screen sits inside the stem and can be adjusted in depth to accommodate both large and small loads; a basket screen is provided for small amounts. According to the manufacturer, the Staroma 360 is the version with an SS316 stainless steel housing.
Temperature and dwell time
QaromaShop specifies an operating range of 191 to 254 °C (375–490 °F) for the Taroma 360, set using the PID controller. Each range has a corresponding “heat soak” time. This means the dwell time during which the attached housing heats the material in the stem, not the device's heat-up time.
The manufacturer's table specifies: 191–210 °C (375–410 °F) with 60–90 seconds, 210–232 °C (410–450 °F) with 30–60 seconds, and 232–254 °C (450–490 °F) with 15–30 seconds. According to QaromaShop, stirring is not necessary. After lifting off the housing, use the final draw to extract the residual heat from the stem.
Heating and connection
The Taroma 360 is heated by a specially developed 150-W heating coil with a diameter of 20 mm that connects to the PID controller. The coil has a five-pin XLR connector; according to the manufacturer, modified or incompatible coils should not be used.
The glass stem fits 14- and 18-mm joints. QaromaShop strongly recommends an Ash Catcher with a carb hole or a Passthrough Bowl so you can clear the draw without lifting off the housing.
Kit contents
The DIY kit includes the titanium housing, a quartz dish for concentrates, the glass stem, a tested 20-mm heating coil, the PID controller with plug (US, EU, or AU only), a walnut coil handle (Walnut StabWood), a porcelain stand, two packages of 3-mm ruby beads, stainless steel screens, a basket screen, and a stainless steel spoon with a stirring tool. The glass adapter for the basket screen is no longer included because it frequently gets stuck and is available separately.
The accessories recommended by QaromaShop are not included: a metal dish, additional glass stems, a small Ash Catcher with a carb hole, Passthrough Bowls, and replacement screens. There is no warranty or return option; shipping damage must be reported with a photo or video within 24 hours of receipt.
Alternatives at a similar price 6
Same device type and a similar price; matching heating methods come first. Size and features may differ.
Head-to-Head Comparisons 3
Spec comparison
 QaromaShop Taroma 360 | ||||
|---|---|---|---|---|
| Type | Ball Vape | Ball Vape | Ball Vape | Ball Vape |
| Heating | Hybrid | Convection | Convection | Convection |
| Temperature | 191°C - 254°C | N/A | N/A | 338°C - 393°C |
| Battery | N/A (AC) | N/A (AC) | N/A (AC) | N/A (AC) |
| Weight | N/A | 23 g | N/A | N/A |
Green = better value
Open in full comparison →Starter Bundles
The housing is made of Grade 2 titanium, and the chamber contains more than 200 ruby beads measuring 3 mm. A glass stem that serves as an adapter and a quartz dish for concentrates are included.
191 to 254 °C (375–490 °F), divided into three ranges. In the lower range, the manufacturer recommends a dwell time of 60–90 seconds; in the upper range, 15–30 seconds.
It is the length of time the attached housing remains on the glass stem and heats the material. Depending on the temperature, QaromaShop specifies 15 to 90 seconds; the manufacturer does not state a heat-up time for the device.
For the glass stem, you need a glass piece with a 14- or 18-mm joint. QaromaShop also recommends an Ash Catcher with a carb hole or a Passthrough Bowl; neither is included in the set.
The housing material: Grade 2 titanium for the Taroma 360 and SS316 stainless steel for the Staroma 360. QaromaShop describes the ruby filling, temperature range, and operation as identical for both.
Comments
No comments yet. Be the first!
Sign in to comment