DynaVap The BB6 is a vaporizer. VapoChecker compares current offers from €125.62 (plus shipping) across 1 shop (as of Oct 16, 2026).Price basis: Item price excluding shipping and coupons
| Heating Method | Hybrid |
| Device Type | Butane Vaporizer |
| Brand | DynaVap |
| Power Source | Butane/Flame |
| Dimensions | 11.0 cm length |
| Dosing Capsules | View dosing capsules |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Glass |
| MSRP | $75.00 |
| Status | Discontinued |
The DynaVap BB6 is a manual, battery-free dry-herb vaporizer with a 110 mm borosilicate glass stem. Six blue diffuser beads and lateral indentations extend the airpath; the airport lets you control the carb air. The conical mouthpiece fits directly into female 10 mm and 14 mm water pipe connections.
The historic complete device was sold with a 2021 stainless steel Tip, CCD, and Captive Cap; a condenser is not required with the BB6. The Tip supports Adjust-a-Bowl. Typical M-style fill sizes, according to current DynaVap information, are around 0.08–0.10 g or approximately 0.05 g in the small setting. Standard dosing capsules are intended for standard Tips.
The Cap is heated with a torch or compatible induction heater until the click. This is manual hybrid heating with no display and no degree-precise temperature selection. DynaVap no longer lists the BB6 in its current range; available retailer listings are therefore remaining stock and may vary in color, condition, and scope of delivery.
With remaining stock, color, condition, and included contents must be checked particularly carefully.
See also: M7 TwoToniuM · M7 · HyperDyn T.H.C. · HyperDyn
The BB6 suits users specifically looking for a modular DynaVap in glass or the dual 10/14 mm water filter fit. Compared to metal stems, the transparent glass shows the internal structure and extends the airpath with six beads. It is, however, less drop-resistant. Since DynaVap no longer carries the model regularly, a BB6 is of interest primarily as verified dealer old stock.
The 110 mm BB6 stem is made from borosilicate glass according to DynaVap. Inside sit six blue diffuser beads; lateral indentations and the airport influence the airpath and carb. The manufacturer describes the draws by comparison as less dense and cooler, but expressly notes the influence of technique. This is not a guaranteed temperature or flavor claim.
The historic complete device came with a 2021 stainless steel tip including CCD and Captive Cap. Unlike many DynaVap stems, the BB6 requires no separate condenser. Caps and standard tips are generally interchangeable within the modular DynaVap system; when purchasing old stock, it should nonetheless be verified that the tip, CCD, and cap are actually included.
The included 2021 stainless steel tip supports Adjust-a-Bowl. DynaVap's current bowl size guide typically states 0.08–0.10 g for M-style tips with a loose fill and approximately 0.05 g in the small position. These are not BB6-specific measurements and depend on grind size, moisture, and packing method. Current standard dosing capsules are designed for standard tips according to the manufacturer.
The BB6 has no battery, no display, and no precise temperature selection. The cap is heated with a torch or compatible induction heater, while being rotated evenly over a flame. The click is the stop signal. The commonly cited five to seven seconds are only general torch guidance; distance, flame, tip, and technique all alter the time. DynaVap describes the extraction as a combination of conduction and heated airflow.
The tapered glass end fits directly into female 10 mm and 14 mm joints; an additional adapter is normally not required. Check the actual joint size of your glass piece regardless. When comparing prices, color, new or used condition, complete tip/cap contents, shipping, and return policies all count. An extremely low price may refer to the stem only rather than the complete device.
Same device type and a similar price; matching heating methods come first. Size and features may differ.
 DynaVap The BB6 | ||||
|---|---|---|---|---|
| Price from | 125.62€ · other regions | 75.14€ · Code VAPOCHECKER5 · incl. shipping | 80.35€ · Code VAPOCHECKER · incl. shipping | 183.15€ · Code VAPOCHECKER · incl. shipping |
| Type | Butane | Butane | Butane | Butane |
| Heating | Hybrid | Hybrid | Hybrid | Hybrid |
| Battery | Butane | Butane | Butane | Butane |
| Weight | N/A | 17 g | 26 g | 31 g |
Green = better value
Open in full comparison →No. DynaVap no longer carries the BB6 in its current range; available listings are old stock or secondhand.
The historic manufacturer description lists the BB6 glass stem, 2021 stainless steel tip with CCD, and Captive Cap. A heat source was not included.
No. The historic manufacturer page expressly states that no condenser is required for the BB6.
Yes, its tapered end is designed for female 10 mm and 14 mm joints. You should check the actual glass joint before purchasing.
The 2021 stainless steel tip features Adjust-a-Bowl. For M-style tips, DynaVap typically states 0.08–0.10 g or approximately 0.05 g; the actual amount depends on material and packing method.
Yes, standard dosing capsules are intended for standard tips according to current DynaVap guidance. The BB6 was sold with a standard stainless steel tip.
Yes. DynaVap describes its manual devices for use with a torch or compatible induction heater. The click cap does not replace a precise temperature readout.
Comments
No comments yet. Be the first!
Sign in to comment