Cannabis Hardware FlowerPot B0
Pros
- Up to 427 C, pure convection
- Made in the USA
- PID temperature control
- Maximum efficiency
Cons
- Home use only mains power
- 3-minute heat-up
- Not portable
Cannabis Hardware FlowerPot B0 — Price Comparison (2 shops)
Last updated: 12/08/2026, 4:06 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
The FlowerPot B0 by Cannabis Hardware is a portable convection vaporizer. Heat-up time is 180 seconds. Currently from 374.50 € across 2 shops (as of Aug 12, 2026).
Specifications
| Specifications | |
|---|---|
| Heating Method | Convection |
| Device Type | Ball Vape |
| Brand | Cannabis Hardware |
| Power Source | AC Power |
| Heat-up Time | 180 seconds |
| Weight | 142 g |
| Warranty | 1 year |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Digital |
| Material | Dry Herb |
| Vapor Path | Metal |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | AC |
Source: OfficialOfficial, OfficialOfficial, OfficialOfficial · Verified 19.02.2026
About this vaporizer
The Cannabis Hardware FlowerPot B0 is a desktop e-nail convection system with PID control. The heating element reaches up to 427 C - from light convection at 180-200 C to full extraction above 380 C. Heat-up around 3 minutes.
Titanium bowl, heating coil ring, glass downstem - all parts made in the USA. Maximum efficiency without battery limits.
Ranked 78th for advanced home users who want desktop power with pure convection.
- Up to 427 C, pure convection
- Made in the USA
- PID temperature control
- Maximum efficiency
- Home use only mains power
- 3-minute heat-up
- Not portable
Cannabis Hardware Vaporizer Key Takeaways Cannabis Hardware — vaporizer manufacturer from USA Conduction + convection + hybrid heating, 7 models (desktop, ball vape) Range from 135 € to 135 €, available at 18+ shops
Cannabis Hardware →See also: VMAX Ball Vape · FlowerPot B2 · FlowerPot B1 · Cannabis Hardware Blaze Pipe
Concept and How It Works
The FlowerPot B0 follows the ball vape principle: a PID-controlled heating element heats stainless steel balls, through which air flows when you inhale. The hot air passes through the herb material and produces dense vapour via convection. Compared with the larger FlowerPot models, the B0 does without the SiC insert that provides additional thermal mass in the more expensive variants. This makes the B0 slightly less heat-retentive, but also more affordable and easier to handle. Heat-up time depends on the PID controller used and is typically 3 to 5 minutes. Thanks to direct convection, the herb material is heated evenly from all sides — stirring or reloading during the session is generally not necessary.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95 % of the desired active compounds while largely avoiding combustion by-products. Source: PubMed 16637053
Construction and Materials
The B0 consists of a heater head that holds the stainless steel balls and a herb screen mounted beneath it. Medical-grade stainless steel is used as the material. All parts that come into contact with the air path are free from harmful substances. To operate it, you need a separate PID controller and a coil — the B0 is only the head itself. Cannabis Hardware also offers complete kits, but many users already own the controller from another FlowerPot model. The modularity is a major advantage of the system: you can swap the head without replacing the rest. The balls themselves are made from hardened stainless steel and retain their thermal properties over many hundreds of sessions.
Vapour Quality and Performance
Ball vaporizers are known for thick, milky vapour clouds — and the B0 is no exception. The large surface area of the steel balls brings the incoming air up to temperature efficiently. At temperatures around 210 to 230 degrees, the B0 delivers dense draws with strong flavour. Compared with the B1 or B2, vapour production is slightly lower because the additional thermal mass of the SiC insert is missing. For most users, however, the difference is marginal — especially with slower draws, which give the balls time to reheat. If you adapt your technique to the B0, you will get thick draws that can easily compete with more expensive desktop devices.
Who Is the FlowerPot B0 Suitable For?
The B0 is aimed at two groups: newcomers to the ball vape world who first want to see whether the concept suits them, and existing FlowerPot users looking for a more affordable secondary head. If you already own a PID controller and a coil, you only need to buy the B0 head and can get started straight away. For users without existing accessories, a complete B1 or B2 kit is often the better choice. The B0 is also a good option for anyone who wants a head dedicated purely to herbs — without the concentrate functionality of the higher-end models. Thanks to the active community around Cannabis Hardware, you can find plenty of tips online on the ideal temperature and draw technique for the B0.
More Cannabis Hardware Vaporizers 1
Spec comparison
| FlowerPot B0 | FlowerPot B2 | |
|---|---|---|
| Type | Ball Vape | Ball Vape |
| Heating | Convection | Convection |
| Temperature | 427°C | 427°C |
| Heat-up time | 180s | 300s |
| Battery | N/A (AC) | N/A (AC) |
| Price from | N/A | N/A |
| FlowerPot B0 | Airstream | |
|---|---|---|
| Type | Ball Vape | Desktop |
| Heating | Convection | N/A |
| Temperature | 427°C | N/A |
| Heat-up time | 180s | N/A |
| Battery | N/A (AC) | N/A |
| Price from | N/A | N/A |
Compatible Accessories
Adapters
6
Replacement Parts
13
Other Accessories
66
Starter Bundles
Yes, the B0 is only the head. A PID controller and heating coil are required separately. Cannabis Hardware also sells complete kits.
The B0 does without the SiC insert that provides additional thermal mass in the B1 and B2. The B0 is therefore slightly less heat-retentive, but more affordable and simpler. The B1 and B2 can also handle concentrates.
The B0 is primarily designed for dry herbs. For concentrates, the B1 or B2 models with a SiC insert are better suited.
The stainless steel balls and the screen can be soaked in isopropanol and cleaned with a brush. Between sessions, it is enough to tap out the herb screen.
Yes, all FlowerPot heads use the same connection system and are mutually compatible with Cannabis Hardware PID controllers.
Comments
No comments yet. Be the first!
Sign in to comment