Pros
- Convection with flame technique.
- Just 20 g, ultra-light.
- On-demand with instant draws in 5 s.
- Water pipe compatible.
- No charging needed, just fire.
Cons
- Needs lighter/flame to operate.
- No electronic temperature display.
- No dosing caps and no app.
Camouflet Ceramo XL — Price Comparison (6 shops) 153–203 €
Last updated: 30/04/2026, 6:45 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Convection |
| Device Type | Butane Vaporizer |
| Brand | Camouflet |
| Power Source | Butane |
| Heat-up Time | 5 seconds |
| Weight | 210 g |
| Warranty | 2 years |
| Water Pipe Compatible | View water pipe adapters |
| Session Mode | On-Demand |
| Temperature Control | Manual |
| Material | Dry Herb |
| Vapor Path | Ceramic |
| Replaceable Battery | No |
| Passthrough Charging | No |
| Charging Port | none |
| MSRP | 157 € |
Source: CamoufletOfficial · Verified 19.02.2026
About this vaporizer
The Camouflet Ceramo XL is a Canadian butane convection vaporizer built for users who actively choose flame over electricity. No battery, no charging port, no digital interface — just a ceramic heating element that a butane torch brings up to temperature in about five seconds. That speed is one of butane's genuine advantages over most portable vaporizers.
The XL in the name refers to an extra-large herb chamber, which means more material per load and more vapor production per heating cycle. Sharing the device, packing a larger dose, or simply getting more out of each torch hit are all practical benefits of the oversized chamber.
Heating is pure convection. The ceramic element transfers heat to airflow rather than to the herb directly — that's the same principle as the most respected tabletop vaporizers, delivered in a butane-powered format. The ceramic material handles heat well, distributes it evenly, and doesn't add any taste to the vapor path.
Water pipe compatibility is part of the design, which makes sense given that butane convection vapor can run hot. Connecting to a bong or water piece cools and softens the draw significantly. Most serious Camouflet users run their devices through water, and the Ceramo XL is set up for exactly that.
Camouflet backs the device with a two-year warranty. The XL suits experienced users who know the butane format, want maximum chamber size, and prefer convection heating over everything else the portable market offers.
- Convection with flame technique.
- Just 20 g, ultra-light.
- On-demand with instant draws in 5 s.
- Water pipe compatible.
- No charging needed, just fire.
- Needs lighter/flame to operate.
- No electronic temperature display.
- No dosing caps and no app.
The Camouflet Ceramo XL uses ceramic balls for heat retention - an approach that differs from the ruby or quartz balls used by other manufacturers. Ceramic holds heat longer and releases it more evenly than a pure titanium tip. The device belongs to Camouflet's Convector range, is handmade in Canada, and runs on butane gas. The body is made of hardwood, while the vapour path is made of glass and glass components. A 14-mm WPA adapter is built in, allowing the Ceramo XL to connect directly to water pieces. Thanks to the larger chamber and the ceramic balls, it works both as a portable vaporizer and as a substitute for a desktop device at home. Our price comparison shows current offers for the Ceramo XL.
See also: Camouflet Injector · Zooter · Camouflet Inductor · Convector XL
Ceramic Ball Convection
In the heating section of the Ceramo XL, there are ceramic balls that are heated with a butane lighter. The balls store the heat and release it evenly to the air flowing through over several draws. This keeps the temperature more stable than in a setup based solely on a titanium tip. Extraction is more thorough because the heat does not drop off after the first draw. Compared with ruby balls, ceramic is more affordable and offers similar heat retention properties at a lower weight.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95 % of the desired active compounds, while largely avoiding combustion by-products. Source: PubMed 16637053
Between Desktop and Portable
The larger chamber of the XL format and the sustained heat of the ceramic balls make the Ceramo XL a device that is not easy to categorise. On a water piece at home, it delivers results reminiscent of desktop vaporizers. On the go, it works just as well - with a butane lighter as the only power source, there is no need for a socket. The wooden body insulates well and stays cool in the hand, even after several draws in a row.
How Do I Clean and Maintain My Vaporizer?
The glass components can be removed and soaked in isopropanol. The ceramic balls themselves need very little maintenance - occasional soaking in cleaning alcohol is enough. As the vapour path contains no electronics, there is little that can break. The balls last indefinitely under normal use. If needed, individual glass parts can be reordered from Camouflet as replacements.
Ceramo XL Induction Principle
The Camouflet Ceramo XL uses an induction heating system with a ceramic chamber. Unlike flame or resistance heating, an electromagnetic field warms the chamber evenly from all sides. The result is pure convection heat without direct contact with heating elements. The ceramic stores heat evenly and releases it slowly to the material.
Ceramo XL Session Flow
Switch on the Camouflet Ceramo XL and set the desired temperature. The ceramic chamber heats up in about 15 seconds. Grind the material medium-fine and fill it loosely. The on-demand heating activates only when drawing — no material is wasted between draws. For maximum efficiency, take short, strong draws and leave a 5-second pause between draws.
Ceramo XL Care
Clean the Ceramo XL's ceramic chamber after every third session with a cotton swab and isopropanol. Ceramic does not absorb flavours and is easy to clean. Run a pipe cleaner through the vapour path weekly. With heavy use, carry out a deep clean every two weeks: rinse the chamber and path with warm isopropanol and allow them to dry completely.
Comments
No comments yet. Be the first!
Sign in to comment