Universal Baller - 30mm FMJ Coil (30MMx30MM 200W) by Terp Chasers Club

Name: Universal Baller - 30mm FMJ Coil (30MMx30MM 200W) by Terp Chasers Club
Brand: Terp Chasers Club
SKU: universal-baller-30mm-fmj-coil-30mmx30mm-200w-by-terp-chasers-club
Availability: InStock

Terp Chasers Club

Heater

The Universal Baller 30 mm FMJ Coil from Terp Chasers Club is a replacement or spare heating coil for Universal Baller configurations with a Full Metal Jacket Adapter.

🔍

Not shipped to your region

Available internationally from €89.90 at 1 shop. Customs and import VAT may apply.

View alternatives →

Price Comparison

Show shops individually

Price History (30 Days)...

Show shops from other regions Customs & import VAT may apply

BallvapeShop

89.90€ Not shipped to your region

Go to Shop

VGoodiEZ US Out of Stock

61.52€ ($70.00) + 7.91 € shipping= 69.43 €2–5 business days

Go to Shop

* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.

The Universal Baller 30 mm FMJ Coil from Terp Chasers Club is a replacement or spare heating coil for Universal Baller configurations with a Full Metal Jacket Adapter. Its fitting area measures 30 × 30 mm, and its power rating is 200 W. The connection cable is 4 ft long. The heating coil is designed for 220 V and wired according to the standard CrossingTech pattern, allowing it to be used directly with a suitably wired 220-V EU PID controller. This 30-mm version fits inside the FMJ Adapter, which completely encloses the heating coil and transfers the heat to the balls. It is suitable for the Universal Baller and the Universal Baller V2 Complete Kit, provided the FMJ Adapter is used. However, it is not the correct version for a V2 kit in its standard configuration, as that uses a heating coil with a diameter of 25 mm. You can use it as a replacement coil if the existing FMJ heating coil is worn out. A second coil can also be kept as a spare so that your setup can be put back into operation after a failure. When replacing it, you should check the connections and ensure that the PID controller, voltage and wiring pattern are compatible with the heating coil.

Technical specifications

The heating coil has a fitting area of 30 × 30 mm and operates at 200 W. The 4 ft cable provides flexibility between the heating coil and PID controller. This version is designed for 220 V. Its connections follow the standard CrossingTech wiring pattern, making it suitable for direct use with a suitably wired 220-V EU PID controller.

Compatibility

The heating coil is compatible with the Universal Baller and the Universal Baller V2 Complete Kit when the Full Metal Jacket Adapter is used. It sits inside the FMJ housing and is designed for its different coil geometry. A setup with standard CrossingTech wiring and a suitable 220-V EU PID controller is required.

Difference from the 25-mm heating coil

The standard Universal Baller V2 Complete Kit uses a 25-mm heating coil rated at 200 W. The 30-mm version offered here is specifically intended for the FMJ Adapter. If you do not use the Full Metal Jacket attachment, you will therefore need the 25-mm version. The two versions should not be selected solely on the basis of their identical power rating.

Replacement and care

Keep the heating coil clean and check its connections when replacing it. Heating wires are subject to wear, so the coil can be replaced if it becomes defective. Before fitting it, you should check whether your setup uses the FMJ Adapter and whether the connected PID controller is compatible with the voltage and the standard CrossingTech wiring pattern.

FAQ

Does this heating coil fit every Universal Baller?

No, it is intended for Universal Baller setups with a Full Metal Jacket Adapter. It fits the Universal Baller V2 Complete Kit when used with this adapter. Without the FMJ attachment, the standard 25-mm heating coil is required.

What is the difference between the 30-mm and 25-mm versions?

The 30-mm version has a different geometry and is designed for the FMJ Adapter. The standard Universal Baller V2 Complete Kit, by contrast, uses a 25-mm heating coil. Both versions operate at 200 W but are intended for different setups.

What do you receive with this product?

You receive a 30 × 30 mm replacement or spare heating coil for the Universal Baller with FMJ Adapter. It is rated at 200 W, has a 4 ft cable and is designed for 220 V and the standard CrossingTech wiring pattern.

Can the heating coil be connected directly to a PID controller?

Yes, it can be used directly with a suitably wired 220-V EU PID controller. It uses the standard CrossingTech connection pattern. Before connecting it, check that your controller's voltage and wiring comply with these specifications.

How do you care for the heating coil, and when should it be replaced?

Keep the heating coil clean and check the connections when replacing it. As heating wires are wear parts, the coil should be replaced when worn or if it fails. Keeping a spare heating coil can prevent extended downtime for your Universal Baller setup.