TCC Universal Baller Housing SS444 Titanium

Name: TCC Universal Baller Housing SS444 Titanium
Brand: Terp Chasers Club
SKU: tcc-universal-baller-housing-ss444-titanium
Availability: InStock

Terp Chasers Club

Heater

The TCC Universal Baller Housing SS444 Titanium from Terp Chasers Club is the heater housing for a Universal Baller heater head and serves as a replacement or upgrade component for a compatible…

🔍

Not shipped to your region

Available internationally from €69.90 at 1 shop. Customs and import VAT may apply.

View alternatives →

Price Comparison

Show shops individually

Price History (30 Days)...

Show shops from other regions Customs & import VAT may apply

BallvapeShop

69.90€ Not shipped to your region

Go to Shop

* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.

The TCC Universal Baller Housing SS444 Titanium from Terp Chasers Club is the heater housing for a Universal Baller heater head and serves as a replacement or upgrade component for a compatible setup. It combines a Grade 2 titanium inner chamber with an SS444 stainless steel outer shell. The housing set includes a lid as well as adapters for wired and wireless operation. The required heating coil, PID controller and filling material are not included in the set. You can use the Housing with a compatible 25 mm heating coil, an SS316 Armored Coil or a complete 30 mm FMJ setup. The heating coil and adapter must match the selected configuration. An arbitrary 30 mm heating coil is not a substitute for a complete FMJ setup. You will need a suitable PID controller for each configuration; wireless operation also requires a compatible docking station. The heater housing accommodates the current quartz and ruby inserts as well as the separately available adapter set. In addition to the heating coil, PID controller and, where applicable, docking station, a complete setup also requires ruby balls, a quartz or ruby insert and a bowl. The set is therefore intended for users who want to add specific components to an existing setup or replace the housing of their heater head.

Construction and materials

The heater housing consists of two different metal components: a Grade 2 titanium inner chamber and an SS444 stainless steel outer shell. The lid, Wireless Adapter and Wired Adapter are also made from SS444. Three machined SS316 screens and two SS304 spiral retaining rings are included to retain the contents inside. This provides the metal housing and retaining components as a complete set.

Compatible heating configurations

The supported options are a compatible 25 mm heating coil, an SS316 Armored Coil or a 30 mm FMJ setup. Each heating coil requires a compatible PID controller. Make sure that the heating coil and adapter are matched to one another. An arbitrary 30 mm heating coil is not sufficient as a substitute for a complete FMJ setup. Wireless use additionally requires a compatible docking station.

Inserts and adapters

The Housing accommodates the current quartz and ruby inserts from TCC. The current separately available adapter set with TMJ Adapter can also be used. The included Wired Adapter and Wireless Adapter allow the housing to be prepared for wired or wireless configurations. Which operating mode is supported depends on the corresponding heating coil, adapter and, where applicable, docking station configuration.

Package contents and required components

The set includes an SS444 lid, an SS444 Wireless Adapter, an SS444 Wired Adapter, a Grade 2 titanium inner chamber, three SS316 screens and two SS304 spiral retaining rings. The heating coil, PID controller, docking station, ruby balls, quartz or ruby insert and bowl are not included. The housing set is therefore not a complete heater head that is ready for immediate use.

FAQ

Is the Housing compatible with every 30 mm heating coil?

No, an arbitrary 30 mm heating coil is not a substitute for a complete FMJ setup. The supported options are a compatible 25 mm heating coil, an SS316 Armored Coil or a matched 30 mm FMJ configuration. The heating coil, adapter and PID controller must be suitable for the respective operating mode.

Can I use the heater housing in both wired and wireless configurations?

Yes, adapters for both operating modes are included. You receive a Wired Adapter and a Wireless Adapter made from SS444 stainless steel. Wireless operation additionally requires a compatible docking station, which is not included.

Is the set ready for immediate use?

No, the set contains only the heater housing and the associated metal components. You will additionally need a compatible heating coil, a PID controller, ruby balls, a quartz or ruby insert and a bowl. Wireless operation also requires a compatible docking station.

What materials is the Housing made from?

The inner chamber is made from Grade 2 titanium, while the outer shell is made from SS444 stainless steel. The lid and the Wired and Wireless Adapters are also made from SS444. The three screens are made from SS316, while the two spiral retaining rings are made from SS304.

Which components can be reused from an existing configuration?

You can continue using compatible components from the supported configurations. The Housing accommodates the current quartz and ruby inserts as well as the current adapter set. Whether the heating coil, PID controller or docking station is compatible depends on the selected Wired, Wireless or FMJ configuration.