CrossingTech WOHW V2 Heating Coil 25mm
25mm heating coil (220V EU) for the WOHW V2. Larger coil than the V1 (20mm) for faster heat-up and better heat distribution across the ruby balls.
Price Comparison (2 shops)
Price History (30 Days)...
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Design and construction
The heating coil is designed as an axial 25-mm barrel coil and operates at 220 V. A braided Kevlar sheath protects the wires against heat and damage. In the WOHW V2, the coil surrounds the heating housing containing the ruby balls. It heats this housing, which then transfers the stored heat to the bowl. Its design corresponds to the original coil supplied with the WOHW V2 kit.
Compatibility
The coil is intended exclusively as a replacement part for the Wireless One Hit Wonder V2. It fits its Wireless Dockingstation and can be operated with the Classic PID Controller and the Dual PID Controller. It is not specified as compatible with the Core 2.1, TUG 2.0 or the original Wireless One Hit Wonder. With other XLR PID controllers, having the same connector type alone is not sufficient: the pinout must also match.
Initial use
Before first use, a burn-off at approximately 425 °C or 800 °F for around ten minutes is recommended. The heating coil remains empty during this process so that any possible manufacturing residues are removed. You can then set the desired operating temperature on the connected PID Controller. For the WOHW V2, the recommended operating range is between 285 and 345 °C or 550 and 650 °F.
Wear and replacement
Heating coils are subject to natural wear during operation. Over time, the electrical resistance of the heating wire may change. Typical indications of this are increasingly sluggish or irregular heating behaviour. If these changes occur, the coil is intended to be replaced. The 25-mm version directly replaces the original heating coil installed at the factory in the WOHW V2, without requiring a different coil size.
FAQ
Does the 25-mm heating coil also fit the Core 2.1 or TUG 2.0?
No, it is designed exclusively for the Wireless One Hit Wonder V2. No suitable use is specified for the Core 2.1, TUG 2.0 or the original WOHW. The coil is used on the Wireless Dockingstation of the WOHW V2.
What distinguishes this coil from other XLR heating coils?
This version is an axial 25-mm barrel coil with 220 V for the WOHW V2. A matching XLR plug alone does not confirm compatibility because XLR PID controllers may use different pin configurations. Before connecting it to another controller, you must compare the pinout.
Which PID Controllers can I use with the heating coil?
It works with the Classic PID Controller and the Dual PID Controller from CrossingTech. Other XLR controllers are only suitable if their pinout is identical. The coil does not work with High-Five controllers or other XLR systems with a different pinout.
Does the heating coil need to be prepared before first use?
Yes, the empty coil should be heated at approximately 425 °C for around ten minutes before first use. This burn-off serves to remove any possible manufacturing residues. Afterwards, you can set an operating temperature between 285 and 345 °C for the WOHW V2.
When should I replace the heating coil?
You should replace it if it begins to heat increasingly slowly or irregularly. Heating coils are wear parts whose wire resistance may change over time. The 25-mm coil is intended as a direct replacement for the heating coil fitted at the factory in the WOHW V2 kit.
Compatible Vaporizers
Related Accessories
Where can I buy CrossingTech WOHW V2 Heating Coil 25mm at the best price?
CrossingTech WOHW V2 Heating Coil 25mm is currently available from €60.53 at VGoodiEZ US. Includes known shipping.
Which vaporizers is CrossingTech WOHW V2 Heating Coil 25mm compatible with?
CrossingTech WOHW V2 Heating Coil 25mm is compatible with Core 2.1, TUG 2.0, Wireless One Hit Wonder (WOHW), Wireless One Hit Wonder V2 (WOHW V2).
Is it worth comparing prices for CrossingTech WOHW V2 Heating Coil 25mm?
Yes, CrossingTech WOHW V2 Heating Coil 25mm is available from 2 shops. Prices range from €52.62 to €52.62. Item price; shipping may be extra.