Pros
- Very affordable price
- Simple single-button design
- 1600 mAh battery
- 30-sec heat-up
- Compact form factor
- 1-year warranty
Cons
- No WPA port
- Only 3 temperature levels
- Pure conduction
- No display
- 1-year warranty
Pulsar APX V3 — Price Comparison (18 shops) 31–129 €
Last updated: 05/09/2026, 7:27 PM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Conduction |
| Device Type | Portable |
| Brand | Pulsar |
| Power Source | Battery |
| Heat-up Time | 30 seconds |
| Battery Capacity | 1600 mAh |
| Weight | 100 g |
| Warranty | 1 year |
| Session Mode | Session |
| Temperature Control | Presets |
| Material | Dry Herb |
| Vapor Path | Ceramic |
| Replaceable Battery | No |
| Passthrough Charging | No |
Source: PulsarOfficial, Tools420Retailer · Verified 19.02.2026
About this vaporizer
The Pulsar APX V3 is a compact conduction vaporizer with a 1600mAh battery and three preset temperature settings. It heats up to 220°C in 30 seconds;The simple one-button design makes it the ideal entry-level vaporizer. No WPA connection, but good value for the price in the budget segment.
- Very affordable price
- Simple single-button design
- 1600 mAh battery
- 30-sec heat-up
- Compact form factor
- 1-year warranty
- No WPA port
- Only 3 temperature levels
- Pure conduction
- No display
- 1-year warranty
Pulsar Vaporizer Key Takeaways Pulsar — vaporizer manufacturer from USA Conduction + convection heating, 37 models (portable, pen) Range from 6.01 € to 197.89 €, available at 30+ shops
Pulsar →The Pulsar APX V3 is a compact portable dry herb vaporizer. The third generation brings a noticeably larger ceramic chamber (0.5 g vs. 0.3 g on the V2), five preset temperature levels from 190 °C to 230 °C (374–446 °F), an LED display with haptic feedback, and a USB-C port for charging. The built-in 1600 mAh battery lasts around 90 minutes and recharges in about the same time. Standing just under 4 inches tall and priced around $70, the APX V3 is aimed at beginners and budget shoppers who want a bigger chamber and a clear display without spending much. Current pricing from 50+ European shops is tracked daily on the product page.
See also: Pulsar Sipper · Pulsar RoK · Pulsar APX E Rig · Pulsar 510 DL 2.0 Pro
Ceramic chamber and temperature presets
The APX V3 uses a full ceramic heating chamber with a 0.5 g capacity – nearly twice the size of the APX V2's 0.3 g chamber. That means fewer refills per session for anyone who likes to pack more. Heating is done by conduction: the material rests directly against the ceramic wall, allowing a quick and even heat-up in about 30 seconds. Five preset temperatures – 190 °C, 200 °C, 210 °C, 220 °C, and 230 °C (374–446 °F) – cover everything from light, flavorful draws to thick, dense clouds. Temperature selection takes one button press, and the LED display shows the active level at a glance.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95% of target compounds while largely avoiding combustion by-products. Source: PubMed 16637053
LED display, haptic feedback, and cash feature
The redesigned LED display on the APX V3 shows the current temperature level and battery status clearly. For discreet use, haptic feedback (vibration) lets you know when the target temperature is reached without looking at the device – handy when it's in your pocket. The cash feature is another new addition: holding the button briefly spikes the temperature to maximum, ensuring the last remaining material in the chamber gets fully vaporized. This makes each load more efficient. An auto-shutoff kicks in after a period of inactivity to conserve battery life.
Battery, charging, and everyday use
The built-in 1600 mAh battery delivers roughly 90 minutes of use on a single charge, according to Pulsar – enough for several back-to-back sessions. Charging is done via USB-C and takes around 90 minutes, which is solid for a budget vaporizer. Passthrough charging (vaping while plugged in) is not supported. The battery is sealed inside the unit and cannot be swapped by the user. At just under 4 inches tall, the APX V3 slips into any jacket pocket. The magnetic mouthpiece detaches tool-free for quick cleaning under running water.
What's in the box and how to clean it
The Pulsar APX V3 ships with the vaporizer unit, a USB-C charging cable, a cleaning brush, a charging adapter, and replacement screens. The magnetic mouthpiece pops off without tools; the chamber and mouthpiece clean up well with a cotton swab dipped in isopropyl alcohol. Screens should be replaced every 10–15 sessions. There is no water pipe adapter (WPA) compatibility, no dosing capsule support, and no companion app – the APX V3 keeps things simple by design. The manufacturer warranty covers one year from the purchase date.
Who should buy the Pulsar APX V3?
The Pulsar APX V3 suits beginners and anyone looking for a no-fuss, affordable dry herb vaporizer with a decent ceramic chamber. Upgrading from the V2 gets you a bigger oven, USB-C charging, and a proper display – all without a significant price jump. Users who want precise degree-by-degree temperature control, WPA compatibility, or app integration should look at devices like the XMAX V3 Pro or Arizer Solo 2 instead. As a straightforward budget portable, the APX V3 delivers reliable daily vapor for around $70 – it makes no grand promises, and it keeps the ones it does make.
More Pulsar Vaporizers 4
Similar Vaporizers 4
Spec comparison
| Pulsar APX V3 | Pulsar RoK | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Conduction |
| Temperature | 220°C | N/A |
| Heat-up time | 30s | 20s |
| Battery | 1600 mAh | 1350 mAh |
| Price from | 47.28€ · incl. shipping | 144.47€ · incl. shipping |
| Pulsar APX V3 | Pulsar Sipper | |
|---|---|---|
| Type | Portable | Portable |
| Heating | Conduction | Conduction |
| Temperature | 220°C | N/A |
| Heat-up time | 30s | 30s |
| Battery | 1600 mAh | 1500 mAh |
| Price from | 47.28€ · incl. shipping | 94.64€ · incl. shipping |
Compatible Accessories
Adapters
2
Replacement Parts
12
Other Accessories
30
Replacement Parts
1
Variants & Editions
The full ceramic chamber holds up to 0.5 g of dry herb – significantly more than the 0.3 g capacity of the older APX V2.
There are five preset levels: 190 °C, 200 °C, 210 °C, 220 °C, and 230 °C (374–446 °F). Precise degree-by-degree adjustment is not available.
The device reaches its target temperature in about 30 seconds. A vibration alert lets you know when it's ready.
Pulsar rates the built-in 1600 mAh battery at around 90 minutes of active use. Actual runtime varies depending on the temperature level used.
It charges via USB-C and takes roughly 90 minutes to reach a full charge. Passthrough charging while using the device is not supported.
The cash feature is activated by holding the button briefly. It temporarily boosts the chamber to maximum temperature to vaporize any remaining material at the end of a session.
Yes, a new LED display shows the current temperature level and battery status. Haptic feedback (vibration) also signals when the target temperature is reached.
No, the APX V3 does not have a WPA port and is not designed to be used with a water pipe or bong.
The magnetic mouthpiece removes without tools. Wipe the chamber and mouthpiece with an isopropyl alcohol-soaked cotton swab. Replace the screens every 10–15 sessions.
Pulsar provides a one-year manufacturer warranty covering defects in materials and workmanship from the date of purchase.
Comments
No comments yet. Be the first!
Sign in to comment