Pros
- Precise temperature control
- Quartz cup for clean flavor
- Compatible with standard glass bongs
Cons
- Requires power connection (no battery)
- For home use only
JCVAP Poby Model L — Price Comparison (5 shops) 59–218 €
Last updated: 17/04/2026, 9:37 AM
* Some links are affiliate links. We earn a small commission if you purchase through these links — at no extra cost to you.
Specifications
| Specifications | |
|---|---|
| Heating Method | Convection |
| Device Type | Desktop |
| Brand | JCVAP |
| Power Source | Battery |
| Heat-up Time | 16 seconds |
| Battery Capacity | 5000 mAh |
| Warranty | 1 year |
| Water Pipe | View water pipe adapters |
| Session Mode | Session |
| Temperature Control | Analog (Dial) |
| Material | Concentrates |
| Vapor Path | Glass |
| Replaceable Battery | No |
| Passthrough Charging | No |
| MSRP | 61 € |
| Status | Discontinued |
Source: JCVAPOfficial · Verified 19.02.2026
About this vaporizer
The JCVAP Poby Model L is an e-nail attachment for glass bongs with a quartz cup and precise temperature control. It is suitable for dabing sessions at home with a stable heat source. Heating method: convection. Maximum temperature 304°C.5000mAh battery. Heating time approx. 16 seconds.1 year(s) warranty.
- Precise temperature control
- Quartz cup for clean flavor
- Compatible with standard glass bongs
- Requires power connection (no battery)
- For home use only
How It Works
The Poby Model L uses an induction coil to heat the metal cap of a DynaVap vaporizer. An alternating current generates a magnetic field that creates eddy currents in the cap, producing heat directly in the metal. Heat-up takes roughly 8 to 12 seconds depending on the cap material and desired temperature. Compared to a jet flame, the heat distribution is more uniform, which tends to produce more consistent vapor. The DynaVap click still signals when the target temperature has been reached.
Research context: A study in the Journal of Pharmaceutical Sciences (Hazekamp et al., 2006) showed that vaporisation at controlled temperatures releases over 95% of target compounds while largely avoiding combustion by-products. Source: PubMed 16637053
How Portable and Ergonomic Is the Design?
The device has a cylindrical shape that fits comfortably in one hand. At the top there is an opening where you insert the DynaVap tip-first. A single button activates the heating cycle, and LED indicators show battery status and operation state. The housing is compact enough for a jacket pocket. Compared to larger induction heaters like the Ispire Wand or the Koil Bro, the Poby Model L is noticeably smaller, which makes it better suited for travel and outdoor use.
How Do I Charge the Battery Properly?
The internal lithium-ion battery provides enough capacity for about 20 to 30 heat cycles per charge. Charging happens via USB-C and takes around 90 minutes. The LED indicator changes color once the battery is fully charged. For a day out, the capacity is usually more than enough. Heavy users who rely on the Poby Model L as their primary heater will need to charge every one to two days depending on usage.
Flame vs. Induction and Other IH Devices
Compared to a traditional jet flame, the Poby Model L works reliably in windy conditions where a lighter might struggle. Compared to stationary induction heaters such as the Ispire Wand, it lacks fine-tuned power control. The trade-off is portability. For DynaVap users who want to leave the torch at home, the Poby Model L is a practical accessory. Those who want full temperature control may prefer a larger desktop induction heater with adjustable power settings.
Poby Model L Setup
The JCVAP Poby Model L is designed for on-demand convection with a glass air path. Load about 0.15 g into the chamber, attach the glass mouthpiece, and draw while holding the button. The heating element activates only during draws, so material is preserved between hits. Heat-up takes about 5 seconds. The compact body runs on a single 18650 battery. USB-C charging takes 2 hours. Clean the glass stem weekly.
Poby Model L Tips
For the best results with the Poby Model L, grind your material medium-coarse. Fine grinds can block the screen and restrict airflow. Draw slowly and steadily for 8-10 seconds — rushing produces thin vapor. The glass mouthpiece delivers pure flavor but is fragile; carry it in a protective case. The 18650 battery swaps in seconds for extended sessions. Start at medium temperature and increase only if vapor feels too thin.
Frequently Asked Questions
Yes, it works with all DynaVap devices that use a standard stainless steel cap. Titanium caps take slightly longer to heat but work as well.
Approximately 20 to 30 cycles on a full charge, depending on how long each cycle runs.
The manufacturer does not recommend using the device while it charges. Best to fully charge before use.
No, induction heating does not harm the cap. The heat is actually distributed more evenly than a flame, which is gentler on the cap over time.
Wipe the inside of the heating chamber with a dry cloth or soft brush. Avoid getting moisture into the device.
Comments
No comments yet. Be the first!
Sign in to comment