Pros
- 4000 mAh battery extends DaVinci runtime
- Smart Paths, boost, and dosage tracking via app
- Zirconia pearl, airflow dial, and dosing pods for flexible packing
- 10 mm adapter supports water filtration
Cons
- Conduction oven needs frequent brushing
- Heavier than smaller conduction rivals
- App features depend on phone OS support
Temperature Settings for the IQ3. You can find the complete overview on the main page.
Temperature Settings
The right temperature on the IQ3 determines flavour, vapour density and active-compound profile. Lower temperatures (170-185 °C) emphasise terpenes and deliver mild, aromatic vapour. Higher temperatures (195-210 °C) produce denser clouds and stronger effects. The DaVinci app also allows Smart Path profiles: rising temperature curves over the duration of the session.
Temperature zones at a glance
| Zone | Range | Result |
|---|---|---|
| Flavour | 170-185 °C | Mild, aromatic, little visible vapour |
| Balance | 185-195 °C | Good flavour with visible vapour |
| Dense clouds | 195-210 °C | Powerful vapour, more intense effect |
| Maximum | 210-221 °C | Full extraction, dark ABV |
Practical tips
- Start at 180 °C and increase in 5-degree steps
- A finer grind often requires a 5-10 °C lower temperature
- In cold surroundings, increase the starting temperature by 5 °C
- Smart Path B (185 → 199 → 210 °C) is suitable for a balanced session
Direct comparisons
IQ3 Guides & Niches
The IQ3 is a portable conduction vaporizer from DaVinci with app control, replaceable battery (21700) and Pearl dosing chamber. Heat-up time around 30 seconds, temperature range 121–221 °C, Zirconia air path for flavour-neutral vapour.
The IQ3 uses conduction heating. The material is heated directly via the heated chamber wall — fast and efficient, with slightly warmer vapour than convection vaporizers.
The IQ3 reaches operating temperature in around 30 seconds. At low starting temperatures below 180 °C it is slightly faster, and at the maximum temperature (221 °C) slightly longer.
Yes, the IQ3 has a replaceable 4000-mAh battery (standard 21700 format). One charge lasts for 60–90 minutes of active session time, and swapping takes less than 10 seconds.
Yes, the IQ3 supports DaVinci dosing capsules for clean and fast filling. Each capsule holds about 0.15 g of material, ideal for microdosing and use on the go.
Yes, the IQ3 is water-pipe compatible (WPA). With a 14er or 18er ground-glass adapter, the vapour can be routed through a bong or bubbler, which cools the vapour further.
Yes, the IQ3 can be controlled via Bluetooth using the free DaVinci app (iOS/Android). Functions: Smart Paths, temperature curves, session timer and firmware updates.
The IQ3 is almost silent. Since no fan is built in (pure conduction), there is no fan noise — unlike with convection or hybrid devices such as Venty or Mighty+.
A fully charged 4000-mAh battery lasts for about 8–12 sessions of 5–8 minutes each. At lower temperatures correspondingly longer, at maximum temperature slightly shorter.
High-quality unprotected 21700 cells such as LG HG2, Samsung 30Q or Sony VTC6 are recommended. Protected cells with a PCB cap are often 2–3 mm longer and do not fit into the housing.
Tap out the chamber after every session. Bathe the mouthpiece weekly in isopropyl alcohol (90 %+), and clean the air path every 2 weeks with a pipe cleaner. Dosing capsules significantly reduce the cleaning effort.
The current best price is 195.00 € incl. shipping. You can find the complete price comparison with all available shops directly at the top of this page.
Comments
No comments yet. Be the first!
Sign in to comment